Chevrolet P20 Van Brake Parts

Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Increases the life span of the brake pads
• Restores brakes to like-new performance
• Prevents noise and premature wear
• Direct replacement for a proper fit

CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:

• 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
• Exclusive rust-prohibitive finishing process extends unit life.
• Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
• All units are 100% tested to ensure reliable performance.
• Guaranteed fit and function.

CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:

• Each unit is 100% new, providing consistent performance when servicing your brake system
• Easy to transfer for on-the-spot master cylinder bleeding
• Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
• Easy to clean to ensure no cross contamination
• Durability for long lasting performance

Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:

• Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
• Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
• Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
• Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
• Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
• Plastic reservoirs are vacuum-tested to ensure they are leak free.

Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance. Industry experts agree – When brake friction materials are ready to be replaced, the hardware should also be replaced.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Contains all the necessary hardware for easy installation
• Manufactured to restrain high tolerances with quality materials
• Helps deliver a quieter, more efficient braking system
• Restores brakes to like-new performance

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Manufactured with quality materials to suppress high stress levels
• Maintains safe movement and effective stopping performance
• Restores brakes to like-new performance

This disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles
• Ideal solution – this kit provides is a reliable replacement for original hardware that has stripped
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this tool, you can be sure the brake adjustments are occurring at the proper intervals.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Corrosion resistant coating for long-lasting durability against harsh roads
• Manufactured to restrain high tolerances with quality materials
• Direct replacement for a proper fit
• Helps deliver a quieter, more efficient braking system

Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this kit, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Increases the life span and maximizes performance of the Drum Brakes
• Manufactured with quality materials to suppress high stress levels
• Corrosion resistant coating for long-lasting durability against harsh roads

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

• Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
• Tensile minimum load holds up to 1800 N
• All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
• Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
• Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
• Brand may vary by location

Hardware consists of a variety of parts designed to assist in restoring your brake system to Like New Performance. Caliper anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Exact fitment and original replacement
• New Brake Hardware prevents noise and premature wear
• Helps deliver a quieter, more efficient braking system

Carquest Premium brake drums meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium drums are manufactured with proper harmonic design and balancing to help eliminate noise and vibration. Our drums are manufactured to the original dimensional specifications for proper fit and performance. Carquest Premium brake drums are designed for long-lasting and quiet braking with superior performance.

Product Features:

• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines. (International Organization for Standardization)
• Proper harmonic design and balance helps to reduce brake noise and vibration
• Optimal metallurgy and casting thickness to preventing warping

The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down springs are designed to secure the brake shoes to the backing plate while allowing proper brake shoe movement.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Manufactured with quality materials to suppress high stress levels
• Maintains safe movement and effective stopping performance

Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:

• Application-specific friction formulations provide shorter stopping distances and extended pad life
• Hardware included for most applications, provides better value and
• OE-designed slots and chamfers to reduce noise and vibration
• Multi-layer shim provides near silent braking
• Powder-coated backing plate prevents corrosion

This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:

• Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
• Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
• Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
• Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups

This parking brake strut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this parking brake strut blade is designed to match the fit and function of the original part on specified vehicles
• Ideal solution – this strut is a reliable replacement for an original part that is missing or damaged
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• Our parts are 100% tested to verify both mechanical and electrical switching performance.
• Decades of industry leading research and development focused on meeting the technician’s needs
• Robust design and high grade materials meet the stringent demands of today’s service professional
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Eliminates heat and corrosion deterioration
• Helps deliver a quieter, more efficient braking system
• Restores brakes to like-new performance

Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime.  Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:

• Wearever Brake Shoes come bonded or riveted based on OE design. 
• Wearever Brake Shoes are coated to prevent rust.
• Wearever Brake Shoes are 100% New not remanufactured.
• Brand may vary by location

Our Brake Spring Hold Down Pin Clip is constructed from high-quality materials for a prolonged service life. Replacement restores the brake system to proper operation, helping to ensure road safety.

Product Features:

• Corrosion-resistant for long-lasting durability against harsh road and weather conditions
• Heat-resistant to withstand high temperatures generated by the brake system
• Direct replacement for a proper fit
• Manufactured to strict engineering quality standards

The components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – the components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles
• Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:

• Meets or exceeds original equipment specifications for performance and durability
• OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
• Application-specific caliper bodies for easy installation
• Brackets included where required, for complete system restoration
• Meets or exceeds original equipment specifications for performance and durability
• OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
• Application-specific caliper bodies for easy installation
• Brackets included where required, for complete system restoration
• OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
• 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
• New bleeder screws, banjo bolts, and crush washers included for a complete repair
• OE Style, stainless steel pad abutment hardware included
• 100% end-of-line inspection and pressure testing ensures quality and performance
• Caliper finish or coating may vary

This kit is designed to match the original parts and hardware required to repair the brake master cylinder on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this kit is designed to match the original parts and hardware required to repair the brake master cylinder on specified vehicles
• Ideal solution – this kit is a reliable replacement for original master cylinder components that have failed due to wear
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This parking brake cable has been engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles. It features a corrosion-resistant design and durable materials for added strength and longevity.

Product Features:

• Trustworthy replacement – engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles
• Quality design – inner cables are sheathed and lubricated to provide improved durability
• Long-lasting construction – flexible casings are completely covered with conduit to prevent wear and tear of interior cables
• Tough materials – zinc-plated fittings prevent corrosion