from

$1.29

This alternator charging system part is application specific and provides a repair solution versus a complete alternator replacement.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$189.99

Carquest Starters take advantage of the power of 100% NEW to restore hard working vehicles to OE specified performance & endurance. All new units and components offer unmatched performance, reduce downtime & customer comebacks. Carquest Starters are primed to keep fleets moving forward. Built to perform in severe duty environments, with high output capabilities built in through improved technical & material formulas for high power output and efficient performance

Product Features:

High quality components form the foundation our parts are built from. Transpo¿s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
High quality components form the foundation our parts are built from. Transpo┐s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
Power & Efficiency are designed into every component. No matter the ambient temperature, starters will provide maximum cranking power to get engines running.
Connectors and power transmission components are highly resistant to extreme moisture environments because we use nickel plated contactors and double armature coating. We maintain a rigorous test schedule with endurance, salt spray, dirt and grime and out
Integrated magnetic switch provides protection against weak power from batteries.
Over-Crank Protection (OCP) Monitors heat in starter from over cranking & shuts down starter to prevent burning
Precision design and machining are the Extreme vibration failure solution. Vehicles often perform in adverse conditions like extreme temperatures that create tolerance shifts that produce high frequency vibration, which leads to resistance in power transf

from

$3.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$22.99

This ignition lock cylinder is designed to match the fit, function and performance of the original equipment part on specified vehicles. It is engineered to help restore ignition lock function when an original cylinder is broken or worn out.

Product Features:

Direct replacement – this ignition lock cylinder matches the fit and function of the original equipment assembly on certain vehicle years, makes and models
Ideal solution – engineered to help restore and ensure the functionality of the lock cylinder
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$24.99

CARQUEST Voltage Regulators are engineered and created by an automotive charging system manufacturer designed to meet or exceed OEM specifications.

Product Features:

CARQUEST Voltage Regulators are designed to match OE fit, form and function. Fitted with critical OEM electronic components results in longer life expectancy.
CARQUEST Voltage Regulators are mechanically designed with utilization of surface mount technology, robust mechanical housing, and consistent encapsulation to protect against moistures & vibration.
CARQUEST Voltage Regulators uses surface mount technology and uniform encapsulation to protect against moistures & vibration.
CARQUEST Voltage Regulators are 100% individually tested for all product functionalities that includes the proper voltage set-point, power capabilities, and other product specifications.

from

$32.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
The BWD SELECT® solenoids contain more pure copper windings than found on most vehicles and create a stronger magnetic field in even the hottest environments for better performance.
The BWD SELECT® solenoids contain cadmium-plated copper discs and solid contact bolts reduce voltage drop to deliver full battery power to the starter and have pure copper battery terminal studs that reduce resistance and permit higher current flow.
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$6.99

This alternator connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this alternator connector matches the appearance and function of the factory hardware on specified applications
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$116.99

Carquest Professional alternators are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new alternators are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional alternators are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new alternators are built with all new components and are 100% triple tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
All new components are utilized to ensure long service life
Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
Internal electronics are upgraded for heavy duty reliability (where applicable)
Regulators and rectifiers are 100% electronically load tested for reliable charging performance
Application-specific technical bulletins included where applicable
All units are 100% triple tested to ensure quality and performance
Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Rotors and stators are load tested and double insulated for maximum charging performance

from

$14.49

Product Features:

RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$48.99

These brackets are made from heavy gauge steel, polished to a high luster, then chrome plated for lasting beauty, Similar in design to original equipment units, these brackets can be adapted to other engines.

Product Features:

Heavy Gauge Steel
Polished To High Luster
Chrome Plated For Lasting Beauty

from

$22.99

These brackets are made from heavy gauge steel, polished to a high luster, then chrome plated. Similar in design to OEM units, these brackets can be adapted to other engines.

Product Features:

Chrome plated
Similar to OEM design
May be adaptable to other applications

from

$12.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$14.99

The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:

Application matched components ensure the charging system can be returned to like new condition.

from

$1.79

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$2.49

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$25.99

The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:

Application matched components ensure the charging system can be returned to like new condition.

from

$31.99

The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:

Application matched components ensure the charging system can be returned to like new condition.

from

$6.99

The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:

Application matched components ensure the charging system can be returned to like new condition.

from

$21.49

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$30.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$5.29

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$6.29

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product