Chevrolet Monte Carlo Performance Exhaust Products

The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

The 70 series utilizes Flowmaster’s patented Delta Flow technology and an enlarged case for improved sound control along with mileage and power gains. Perfect for use on trucks, SUV’s, RVs, tow vehicles and high performance street cars where space allows. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

Copperseal exhaust gaskets are unique gaskets made from .043 inch solid copper. They feature an embossed O-ring design for a leak proof seal. They won’t shrink, deteriorate or blowout. Header bolts stay tight. Ideal for motor homes and towing.

Product Features:

• Will Not Shrink/Deteriorate
• Creates A Tight Leak Proof Seal
• Helps Lower Under hood Temps
• Seals Irregular Surfaces
• Seals Slightly Damaged Surface
• Ideal For Tow Vehicles
• Ideal For Motor Homes

Multi-Layered Steel (MLS) exhaust and header collector gaskets are designed for extreme cylinder pressures produced by high horsepower high compression turbo-charged, supercharged and nitrous oxide injected engines. Manufactured from three stainless steel layers, they resist corrosion, will not burn through or push out and maintain maximum fastener torque retention. Stress formed inner and outer layer embossments act like springs that rebound under exhaust flange clamp load, creating force to seal extreme exhaust pressures. Total gasket thickness .075 inch. Will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel materials.

Product Features:

• Multi Layer Stainless Steel 3-Layers
• Round Port 1.75″ Diameter
• Will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel materials.
• Thickness .072″
• Fits GM LS Series Engines 1997-’15

Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.

Product Features:

• Reusable header, exhaust manifold and collector flange gaskets
• Manufactured from “dead soft” aluminum layers – .125″ thick
• Conforms easily to surface irregularities (warped flanges)
• Compresses down to 0.060″ to create a tight leak-proof seal
• Will not shrink, deteriorate, or blow out- eliminating gasket leaks
• For high performance street, drag race and oval track use

Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.

Product Features:

• Manufactured from high-temperature acrylic blend exhaust material
• Provides excellent sealing and durability
• Can be trimmed if necessary for modified port applications
• For OE replacement, high performance street, drag race and oval track use
• Resists Deteriorating
• Provides Excellent Torque Retention

LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:

• High Performance
• Affordable
• Durable 16 Gauge Material
• Welds Easier
• Lasts Longer
• Heat Cured
• High Heat Resistant

LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:

• High Performance
• Affordable
• Durable 16 Gauge Material
• Welds Easier
• Lasts Longer
• Heat Cured
• High Heat Resistant

Flowmaster’s Scavenger Series Elite long tube headers are designed to replace the restrictive factory cast iron manifolds. These high quality headers are manufactured from stainless steel and are ceramic coated for maximum durability. They feature 1-3/4 in. primary tubes, 3/8 in. thick flanges and incorporate Flowmaster’s popular 3 in. ball flange collector connections, ensuring a leak free installation. Scavenger Series long tube headers deliver maximum performance and are suited to the enthusiast who wants the best. Like all Flowmaster products, the benefits include improved throttle response, power and engine efficiency. Designed for an easy fit, these headers include gaskets and necessary hardware for easy installation. Note 1 – will not fit Saginaw close ratio with 825 power steering box. Note 2 – big block frame stands and motor mounts must be used to ensure proper engine location and header fit. Note 3 – will fit Detroit speed & engineering front sub frames with rack and pinion steering. Note 4 – does not fit with Powerglide transmission. Note 5 – does not fit column shift automatic transmission for Camaro. Note 6 -this product is legal only for off-highway use (except in California or states that have adopted California emission standards), racing use or for use on pre-emission controlled motor vehicles/motor vehicle engines (pre-1966 domestic vehicles certified to California standards, pre-1968 domestic vehicles certified to federal standards and all pre-1968 foreign vehicles), per the application guide.

Product Features:

• Stainless steel construction
• Ball & socket collector connections
• Dyno tuned for maximum performance
• High temperature ceramic coated
• 0.375 thick laser cut flanges

Product Features:

• Fuel Economy From The Engine
• Leak Test For Max Performance
• Ceramic Headers
• Rust And Corrosion Resistance
• Mandrel-Formed Power Plenum
• Leakproof O-Ringed Port Seals
• Include All Mounting Hardware

These brackets are made from heavy gauge steel, polished to a high luster, then chrome plated. Similar in design to OEM units, these brackets can be adapted to other engines.

Product Features:

• Chrome plated
• Similar to OEM design
• May be adaptable to other applications

Mr. Gasket small block Chevy lower alternator mounting kit designed to work with a short water pump. Made of heavy gauge chrome plated steel. Complete with all necessary mounting hardware. Designed to relocate the alternator to the lower left side of the motor. This mounting bracket will make your engine compartment look neat and sanitary. Possible cross member interference on some applications.

Product Features:

• Alternator Relocating Kit
• Heavy Gauge Chrome Plated Steel
• All Necessary Hardware Included
• Helps To Give Engine Compartment A Clean Look
• Designed To Work With Short Style Water Pump
• Possible Cross Member Interference On Some App

Made of high quality stainless steel. These bolts will brighten up your hot rod, or improve the looks of your race car.

Product Features:

• Bright Ball Burnish Finish
• Made From 304 Stainless
• Compact Hex Head Is Ideal Where Space Is Limited
• 16 per Package
• Resist corrosion and provides a clean professional appearance

Made of high quality stainless steel. These bolts will brighten up your hot rod, or improve the looks of your race car.

Product Features:

• Bright Ball Burnish Finish
• Made From 304 Stainless
• Compact Hex Head Is Ideal Where Space Is Limited
• 12 Per Set
• Resist corrosion and provides a clean professional appearance

Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.

Dynomax Performance Exhaust, a leading performance exhaust brand built on over 20 years of market leadership. Each and every Dynomax product is backed by engineers who know what you want and expect out of a performance exhaust product.

Product Features:

• Mandrel bends improve flow capacity over traditional bends
• Combine state-of-the-art engineering with quality material to provide exceptional strength and durability
• Dynomax premium pre-bent pipe is manufactured with precision benders, and then fixture checked, insuring every part is a perfect fit, providing quick and easy installation.
• Pipe diameters are increased from OEM sizes to improve flow and increase power
• Spot welded bushings provide stability and system support

Pipe Kit