Chevrolet K3500 Transmission Parts

(PDT)Premium Drivetrain Transmissions are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each transmission assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.

Product Features:

• All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
• 100% of friction components are replaced with upgraded heavy duty parts.
• Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
• 100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
• Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
• 100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
• Product might not be available in all states due to local laws.

WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.

Product Features:

• Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
• Engineered, manufactured, and tested to meet or exceed OE specifications
• Integrated seal design improves contamination resistance for a longer bearing life
• High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
• Manufactured from high quality steel to maximize durability under even the harshest driving conditions
• Brand may vary by location

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Crowned raceways and rollers to ensure even load distribution for maximum life
• Industry leading coverage
• Professional technicians know they can depend on National

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Fully adjustable vacuum modulator to maintain accurate shift points.

Product Features:

• Meets or exceeds OE fit, form and function

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

Made of quality materials, this automatic transmission oil cooler line connector matches the fit and function of a damaged original equipment connector to restore leak-free performance between the transmission and the oil cooler.

Product Features:

• Quality replacement – this transmission cooler connector matches the fit and function of the original equipment connector
• Durable construction – this oil cooler line connector is made of quality materials for a precise fit and leak-free durability
• Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
• Ideal shop supply – this connector is recommended to have on hand any time service is being performed on the transmission oil cooler line

Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.

Product Features:

• Fluid Balanced

AT SEL SHAFT SEAL

Flywheel and flex plate bolts play an important role in the performance and safety of race cars and street machines alike. That is why the fastener experts at ARP have developed special bolts that are far superior to OEM hardware. ARP offers two styles of flywheel/flex plate bolts: High Performance and Pro Series. They are both forged from aerospace alloy and heat treated prior to thread rolling and machining. Both feature an exclusive, flat, 12 point head design and larger than stock shank diameter for increased strength and improved flywheel register. The popular High Performance series is rated at 180,000 PSI, and the premium grade Pro Series, originally developed for NASCAR competition, has a 200,000 PSI rating. Complete with washers and nuts where applicable.

Product Features:

• Forged From Aerospace Alloy And Heat Treated Prior To Thread Rolling And Machining
• Feature An Exclusive, Flat, 12 Point Head Design And Larger Than Stock Shank Diameter
• Flanged Nut
• Increased Strength And Improved Flywheel Register
• 0.88″ Underhead Length
• Set of 6
• 200,000 PSI
• 1-PC Rear Main

Manufactured from high-density cork and rubber blenc gasket material. Provides excellent sealing and durability. Complete with molded rubber front and rear oil pan seals where applicable. For OE replacement, high performance street, drag race and oval track applications.

Product Features:

• Cork/neoprene material
• Greater thickness recovery
• Excellent compressibility

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• NTK ABS Wheel Speed Sensor connectors, mounts and wire lengths are an exact match to OE for worry free installation. Grease, mounting nut and instruction sheet included where applicable.
• NTK’s Wheel Speed Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function. Manufactured with weather pack connectors to prevent dirt and moisture contamination.
• The ABS ECU monitors the Wheel Speed Sensors rotational speed for anti-lock brake function, stability control and traction control. The ABS sensors report the speed of all four wheels to the ECU to determine if the wheels are locking up.

Our remanufactured transmissions have improved torque converters included with every transmission to eliminate the possibility of front seal leaks, vibration or premature bushing wear, All torque converters are tested for leaks, lock-up, concentricity & balance. Every fully remanufactured valve body, with complete system correction & recalibration kit, is tested independently & includes updated throttle valve, manual valve, 4-spool switch valve, pressure regulator valve & governor plugs for improved shifting, lubrication & performance. All wear-prone valves are restored to stringent specifications & vacuum tested to confirm proper function. Each remanufactured transmission is hot, cold, load & simulated road testing. All remanufactured transmissions are backed by the industry’s best, no-hassle nationwide warranty.

Product Features:

• Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
• If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
• Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
• All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

AT OVERHAUL KIT

Pre-filled clutch hydraulic assembly. Includes a clutch Master cylinder, clutch slave cylinder and line.

Product Features:

• Includes pressure control valves, check valves, and fittings for ease of installation and maintaining OE performance levels
• Each unit includes vehicle-specific bulletins for accurate installation
• TECHnovation brand pre-filled hydraulic assemblies are developed, manufactured and tested to meet OEM standards
• Engineered and supported in the U.S.A. by our tech support team of experts in clutch system function

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

• Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
• Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
• Durable construction – made of quality materials for reliable performance and long service life
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

We offer a line of Auto Trans Shift Lever Control Rod Bushings for a range of applications. All our Auto Trans Shift Lever Control Rod Bushings are made of quality materials for a long service life.

Product Features:

• Direct replacement for a proper fit every time
• Conveniently available in a variety of sizes
• Easy to install
• Manufacturing materials include durable plastic

AT OIL PUMP SEAL

AT OIL PUMP GASKET

This torque converter hardware is designed to match the fit and function of the original hardware on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this torque converter hardware is designed to match the fit and function of the original hardware on specified vehicles
• Ideal solution – this hardware is a reliable replacement for original hardware that has failed due to fatigue
• Durable construction – this hardware is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Product Features:

• ATP Transmission Seals And Gaskets are exact fit, no compromise replacement parts

AT SPEED PINION SEAL