from

$2.79

Ensure proper alignment during clutch installations and service with this convenient clutch alignment tool. Made of quality materials for long and reliable service life.

Product Features:

Convenient solution – ensure proper alignment during clutch installations and service with this handy alignment tool
Restores functionality – do the job right the first time with the right tool
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$163.99

Yoke holder tool, fits most yokes. 1310/1330/1350/1410/7260/7290/MR3/Toyota. No return.

Product Features:

Yoke holder tool
Firmly holds pinion yoke in place allowing for easier pinion preload setting

from

$672.99

Differential Housing Spreader for Dana 30, 44, 60, 61, 70, and 80. The Yukon Differential Housing Spreader allow you to safely & easily set carrier bearing preload, saving time and money. No return. This tool is not compatible with Corvette housings.

Product Features:

Housing spreader
Works on Dana 30, 44, 60, 70 and 80 applications
Allows for proper carrier bearing preload to be set

from

$44.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$45.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$547.99

Dana 80 replacement cutter for spindle boring tool. Bit diameter is 1.630″.

Product Features:

Spindle boring tool replacement bit
Fits Dana Spicer 80 and AAM 11.5″ design

from

$909.99

NO RETURN Dana 80 & GM/Chrysler 11.5″ spindle ID boring tool for 37 & 38 spline axle conversion. Cutting bit diameter is 1.630″.

Product Features:

Spindle boring tool
Fits Dana Spicer 80 and AAM 11.5″

from

$38.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$11.29

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$27.99

This brake bleeder screw assortment is designed to match the fit and function of the original hardware. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake bleeder screw assortment is designed to match the performance and function of the original hardware
Ideal solution – the brake bleeder screws in this assortment are precision-engineered for an exact fit
Durable construction – made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$6.49

This brake bleeder screw is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake bleeder screw matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$4.29

Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.

Product Features:

Manufactured with quality materials to suppress high stress levels
Direct replacement for a proper fit
Corrosion resistant coating for long-lasting durability against harsh roads
This part matches Original Equipment (OE) quality specifications

from

$2.99

This brake bleeder screw is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake bleeder screw matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.29

This brake bleeder screw is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake bleeder screw matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$0.99

Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.

Product Features:

Manufactured with quality materials to suppress high stress levels
Direct replacement for a proper fit
Corrosion resistant coating for long-lasting durability against harsh roads
Provides smoother braking
This part matches Original Equipment (OE) quality specifications

from

$168.89

Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).

Product Features:

Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
Controls Engines Air/Fuel Ratio
Controls Spark Advance For Max Power
Potential Gas Mileage Improvements
No Wiring Or Soldering Required
Installs In Less Than 30 Minutes
Product might not be available in all states due to local laws.

from

$168.89

Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).

Product Features:

Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
Controls Engines Air/Fuel Ratio
Controls Spark Advance For Max Power
Potential Gas Mileage Improvements
No Wiring Or Soldering Required
Installs In Less Than 30 Minutes
Product might not be available in all states due to local laws.

from

$214.49

Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).

Product Features:

Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
Controls Engines Air/Fuel Ratio
Controls Spark Advance For Max Power
Potential Gas Mileage Improvements
No Wiring Or Soldering Required
Installs In Less Than 30 Minutes
Product might not be available in all states due to local laws.

from

$168.89

Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).

Product Features:

Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
Controls Engines Air/Fuel Ratio
Controls Spark Advance For Max Power
Potential Gas Mileage Improvements
No Wiring Or Soldering Required
Installs In Less Than 30 Minutes
Product might not be available in all states due to local laws.

from

$158.89

Hypertech Power Chips are engineered for stock 1981-1995 GM vehicles. The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. Street Runner Power Chips are designed for daily street driving or competition in unmodified vehicles using a stock thermostat.

Product Features:

Designed For Daily Street Driving
For Unmodified Vehicles w/Stock Thermostat
Controls Engines Air/Fuel Ratio
Controls Spark Advance For Max Power
Potential Gas Mileage Improvements
No Wiring Or Soldering Required
Installs In Less Than 30 Minutes
Product might not be available in all states due to local laws.

from

$127.99

Melling suggests that a new properly installed oil pump pick-up tube or screen be a part of every oil pump installation. Melling oil pump screen installation tools provide an easy method for installing a press fit oil pump screen into the oil pump correctly without damaging the oil pump screen tube. Melling oil pump screen installation tools are precision manufactured from high quality materials for worry free performance every time. Melling offers oil pump screen installation tools for both 5/8 inch and 3/4 inch diameter tubes.

Product Features:

Screen installation tool allows for installing press-in type oil pump screen assembly safely
Manufactured from high quality materials for consistent durability
For use with 3/4 In. diameter tubes
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance

from

$108.99

Melling suggests that a new properly installed oil pump pick-up tube or screen be a part of every oil pump installation. Melling oil pump screen installation tools provide an easy method for installing a press fit oil pump screen into the oil pump correctly without damaging the oil pump screen tube. Melling oil pump screen installation tools are precision manufactured from high quality materials for worry free performance every time. Melling offers oil pump screen installation tools for both 5/8 inch and 3/4 inch diameter tubes.

Product Features:

Screen installation tool allows for installing press-in type oil pump screen assembly safely
Manufactured from high quality materials for consistent durability
For use with 5/8 In. diameter tubes
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance