Chevrolet K2500 Fuel Injectors

ACDelco GM Original Equipment Fuel Injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion, and are GM-recommended replacements for your vehicle’s original components. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

The Edelbrock Pro-Flo 4 XT EFI Kit No. 35880 for Big-Block Chevy Rectangle Port engines has the latest in technology and features. The EFI system comes complete with a Pro-Flo XT intake manifold and 60 Lb./Hr injectors capable of 825 HP. Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections for a hassle-free installation. The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and is half the depth of the previous ECU. It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection. We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for. The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations. The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance. E-Tuner 4 app features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

This diesel fuel injector driver module resistor is designed to match the fit and function of the original resistor on specified vehicles, and is engineered for durability and reliable performance.

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

GM Genuine Parts Fuel Injection Throttle Body Mounting Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These gaskets help provide an air-tight seal between the throttle body and the intake manifold, and are GM-recommended replacements for your vehicle’s original components. Replace this gasket whenever you service the throttle body, as leaks can negatively affect the air/fuel ratio and compromise performance. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

CARQUEST new diesel fuel injectors are manufactured using state of the art equipment to ensure long life and trouble-free operation. Each injector is 100% tested to meet or exceed OE performance specifications.

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.End of line testing using the exact OE test specifications.Guaranteed to provide OE performance and meet all emission specifications.Continuous improvement, manufactured with the latest upgrades to components and specifications.

CARQUEST Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our CARQUEST Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. CARQUEST Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Carquest Premium mass air flow (MAF) sensors are built to meet the original equipment (OE) specifications for each application. Our MAF sensors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium mass air flow sensors are 100% new and undergo extensive validation testing to ensure long-lasting performance and reliability.

Every single Delphi mass air flow (MAF) sensor that we manufacture – whether with or without the housing – is built with calibrated all-new components and is never remanufactured. Our mass air flow sensors are designed and tested to meet or exceed OE requirements, and engineered for a perfect fit in more than 180 million vehicles on the road today in North America – including makes from Ford, Toyota, Nissan, Volkswagen, Hyundai, BMW, Honda, GM, Mazda, Subaru, Acura and more.

This diesel fuel injector pump driver relocation kit is designed to match the original components required to relocate the fuel injector pump on specified vehicles. It’s made of quality components for reliable performance.

Allows relocation of Pump Mounted Driver (PMD) from fuel injection pump to fender well, which allows for cooler operation and extended life.

Precision is key for the fuel pressure regulator on any vehicle. At Delphi, we use OE engineering to test our regulators and fuel technologies to ensure the utmost performance and durability. Our Nitrile diaphragms are resilient against high-ethanol fuels, and we utilize two designs to help meet emissions standards while covering a wide array of domestic vehicles. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management. Visit our Resource Center for helpful tips and tricks on fuel pumps technologies and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

ACDelco GM Original Equipment Fuel Injection Pressure Regulators are mechanical valves that control fuel pressure in the fuel injector rail, and are GM-recommended replacements for your vehicle’s original components. Their spring-loaded valves return excess fuel back to the fuel tank. These original equipment fuel injection pressure regulators have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Delphi knows OE technology and how to service diesel systems. For more than 60 years, we have partnered with 25 OEM’s to bring our OE diesel powertrain knowledge and expertise to the aftermarket. Delphi diesel systems operate at high performance to meet today’s tough emissions standards and are built to OE specifications for the fit, form, and function technicians expect. Trust Delphi for an unrivalled, cost-effective diesel program to help build your business.

CARDONE Fuel Injection Pump Installation Kits provide the option of not replacing the entire oil rail, providing an easy fix and saving you hundreds of dollars. Paired with CARDONE’s premium Oil Rail Removal Tool (2K-205T), this repair kit allows technicians and vehicle owners to repair expensive high-pressure oil issues in a fraction of the time.

Wells Vehicle Electronics Fuel Injection Fuel Pressure Regulator Diaphragm, 3G1097.

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Includes hard to find or previously dealer-only components.

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Includes hard to find or previously dealer-only components.

CARDONE Diesel Fuel Injector Kits conveniently contain all components needed to complete the entire job, while other suppliers sell each component individually. Each kit includes everything required for installation, ensuring leak free operation and reduced crank times due to fuel leaks. Each kit contains 100% new components, ensuring trouble-free installation, keeping both you and your vehicle on the road for many years to come.

This complete kit includes necessary components to replace the fuel injector return lines and copper gaskets on the fuel injectors.

Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.