2001 Volkswagen Jetta Motor Oil

CASTROL EDGE Euro Car 5W-30 C3 Full Synthetic Motor Oil is a high-performance engine oil that is designed to provide superior protection to the latest technology, high output engines that operate at extreme temperatures. This full-synthetic motor oil is formulated to transform under pressure, increasing film strength to prevent oil breakdown and reduce friction to unlock maximum performance. It is optimized to deliver 40% better performance than other motor oils and is recommended by world-leading auto manufacturers. This motor oil provides engine protection for the entire drain interval and meets API CF/SN, ACEA A3/B4, ACEA C3, GM dexos2 specifications. It is suitable for European OEM diesel specifications for Mercedes-Benz and VW/Audi. This motor oil was formerly known as Castrol SLX and is available in a 1-quart container.

Product Features:

• Optimized to deliver 40% better performance than required by acea standards
• Recommended by world leading auto manufacturers
• Engine protection for the entire drain interval even under extreme pressure of high output engines
• Meets api cf/sn, acea a3/b4, acea c3, gm dexos2, mb approval 229.31/229.51, vw 505 00/505 01, renault rn 0700/0710
• Formerly known as castrol slx
• Syntec Power Technology: The reformulated EDGE Engine Oil now features Syntec Power Technology, which enhances its performance even further.

Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to sludge, varnish and carbon build-up in your engine: three factors that reduce engine life, power and fuel economy. Castrol Ultraclean is a synthetic blend engine oil available in 0W-20, 5W-20 and 5W-30 grades. Its double-action formula has been proven to clean away the sludge that can block engine oilways and helps prevent new sludge formation thanks to its synthetic technology. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard. If keeping your engine clean is important to you, it’s good to know that no other oil keeps engines cleaner.

Product Features:

• 1.4X superior sludge protection compared to tough industry standards (As measured in the Sequence VH Sludge test vs. API SP test limits)
• Advanced protection against viscosity and thermal breakdown
• Superior protection against high-temperature deposits
• Premium-quality base oils and anti-wear additives that help extend the life of your engine
• Double-Action Formula: The synthetic blend engine oil features a double-action formula that effectively cleans away existing sludge and prevents new sludge formation.
• Versatile Grades: Available in 0W-20, 5W-20, and 5W-30 grades, Castrol Ultraclean caters to various engine requirements and driving conditions.
• Enhanced Engine Performance: By reducing sludge, varnish, and carbon build-up, this oil helps improve engine life, power, and fuel economy.
• Synthetic Blend Composition: The GTX Ultraclean 5W-20 Synthetic Blend Motor Oil combines the benefits of synthetic technology with the reliability of a standard oil class.

When the going gets tough, the tough get Valvoline Premium Blue. This premium heavy duty engine oil features proprietary One Solution GEN2 Technology designed to protect hardworking diesel, gasoline and natural gas engines in both on-highway and off-highway applications. Our patented, formula is engineered to outperform: resisting oxidation, deposits, corrosion and wear better than industry standards. No wonder it’s The Only One exclusively endorsed and recommended by Cummins for both on road and off highway applications. It’s specially formulated for faster and safer cold starts and has enhanced thermal properties for hot weather operations to help ensure year-round performance. Plus, extended drain intervals reduce oil changes so your engine can work longer between downtime.

Product Features:

• EXCELLENT WEAR PROTECTION IN HEAVY DUTY APPLICATIONS that can take a toll on critical internal moving parts
• RESISTS OXIDATION AND FIGHTS DEPOSITS with high quality base oils and special inhibitors
• PROTECTS DURING COLD START UPS WHILE CONTROLING SOOT as heavy-duty equipment can sit idle for extended periods of time
• PROPRIETARY ONE SOLUTION GEN2 TECHNOLOGY designed to protect hardworking diesel, gasoline and natural gas engines in both on-highway and off-highway applications
• UNIQUE 5,000 MILES OIL DRAINS EXTENSION in Cummins X15/X12 engines when average is 7mpg or higher

Mobil 1 Turbo Diesel Truck 5W-40 is a full synthetic heavy duty diesel motor oil that helps to extend engine life while providing long drain capability and potential fuel economy benefits(1) for modern diesel engines operating in severe applications. Utilizes state-of-the-art technology to help deliver exceptional performance and is recommended for use in all super high-performance diesel applications, including modern low emission engine designs with Exhaust Gas Recirculation (EGR), as well as refrigerated units and well-maintained engines. This formula provides thermal and oxidative stability to help prevent high-temperature deposits and low-temperature sludge buildup. Its exceptional low temperature pumpability allows for easy engine start-up and helps to reduce wear. Mobil 1 Turbo Diesel Truck 5W-40 is recommended for use in a wide range of light-duty applications such as turbo diesel pick-up trucks, as well as heavy-duty applications and operating environments found in the on-road transport and off road mining, construction, and agricultural industries. The performance of Mobil 1 Turbo Diesel Truck 5W-40 is the result of extensive cooperative development work with major equipment builders and application of the latest lubrication technology. ((1) Compared to a 15W-40 conventional engine oil. Actual savings are dependent upon vehicle/engine type, outside temperature, driving conditions, and your current engine oil viscosity. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US.)

Product Features:

• Mobil 1 Turbo Diesel Truck is designed for modern diesel truck engines, delivering long drain capability, exceptional performance, and potential fuel economy benefits (1)
• Meets or exceeds the demanding specifications of major truck manufacturers – one engine oil can be used for mixed fleet operations
• Recommended for use in all super high-performance diesel applications, including low emission engines
• Helps engines last longer by reducing low-temperature sludge buildup and high-temperature deposits
• Exceptional low temperature pumpability allows for easy engine start-up and helps to reduce wear
• Manufacturer Part Number: 127097

5W-30 Pento Super Performance III is a newly formulated high performance engine oil designed to be used in vehicles that call for extended oil drain intervals. This oil is blended by using some of the most modern additives available and carefully selected synthetic based oils. By doing this the oil is considered a Low SAPS formulation that preserves catalysts, the environment, and maintains outstanding engine performance.

Product Features:

• An all- season motor oil offering great protection against harsh start-up conditions and extreme temperature changes.
• Formulated for long service life intervals.
• Reduces motor oil sludge and fuel deposits.
• Contains special friction modifiers which help the engine run smoothly and improve fuel economy.
• High Performance Formula: The 5W-30 Pento Super Performance III is a newly formulated high performance engine oil designed for vehicles with extended oil drain intervals.
• Advanced Additives: Blended using some of the most modern additives available, ensuring superior engine protection and performance.
• Full Synthetic Composition: Made with carefully selected synthetic-based oils, providing excellent lubrication and stability.
• Low SAPS Formulation: This oil is a Low SAPS (Sulfated Ash, Phosphorus, and Sulfur) formulation, which helps preserve catalytic converters and is environmentally friendly.
• Exceeds Industry Standards: SP III 5W-30 Synthetic Motor Oil exceeds API SM, CF; ACEA A3, B3, B4, C3 standards, ensuring top-notch quality and reliability.

FRAM Heavy Duty 15W-40 Diesel Oil is premium high performance diesel engine oil utilizing the latest in engine oil additive technology to offer the ultimate protection of your engine. Designed to meet or exceed the latest OEM and API CK-4 requirements, it is also backwards compatible to previous OEM and API specifications such as CJ-4, CI-4, CI-4+, and CH-4. STP 15W-40 Diesel Oil carries the API SN classification for use in gasoline engines and is an excellent choice for operators with mixed fleets. The FRAM HD 15W-40 diesel oil is specially designed to protect EGR/Low-Emission Diesel Engines while maximizing the durability of Diesel Particulate Filters (DPF’s).

Product Features:

• High soot handling
• Improved sludge control
• Excellent component protection for corrosion and wear
• Superior oxidation stability
• Shear stable formulation
• One oil for mixed Fleets
• Exceptional oil consumption control.
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.

Pennzoil Start-Stop Protection Full Synthetic motor oil protects against damaging effects of frequent short trips and stop-and-go driving. Pennzoil Start-Stop Protection Full Synthetic helps reduce deposit and sludge build-up to improve engine performance while driving in heavy traffic. Pennzoil Start-Stop Protection also provides unsurpassed anti-wear protection for millions of stop-and-starts. Pennzoil’s patented process synthesizes natural gas into a 99.5 % pure base oil that results in better oxidative stability, cold temperature performance, and volatility control. Pennzoil makes taking care of your vehicle easier with its range of premium motor oils – each one specially formulated to meet the requirements of your engine and unique driving style.

Product Features:

• Uniquely designed for your drive, Pennzoil Start/Stop Protection Full Synthetic motor oil protects against the damaging effects of stop-and-go driving
• Pennzoil Start/Stop Protection motor oil helps reduce deposit and sludge build-up to improve engine performance while driving in heavy traffic.
• Natural gas is synthesized into a 99.5% pure base oil, resulting in better oxidative stability, cold temperature performance, and volatility control
• Each Pennzoil premium oil is specially formulated to meet the requirements of your engine and unique driving style
• Recommended for use in all vehicles requiring the use of SAE 0W-20 viscosity grade engine oils; suitable for use in SAE 5W-20 applications

FRAM Conventional High Mileage 10W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 10W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Sludge Cleanup and Engine Efficiency: Formulated to help clean out sludge buildup, keeping engines running clean with increased efficiency and power.
• Versatile Compatibility: Protects domestic and imported vehicles and equipment powered by gasoline or light-duty diesel engines, including turbocharged and supercharged engines.
• Meets Stringent Standards: Formulated to meet or exceed all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF, and ILSAC GF-6A Resource Conserving Service Category.

Pentosin HP 5W-30 Synthetic Motor Oil is a high-performance engine oil that is fully synthetic and designed for modern vehicles with extended oil service intervals. It is suitable for use in both gasoline and diesel engines, including those with turbochargers, as well as non-turbocharged vehicles that require 5W-30 oil. This all-season motor oil offers excellent protection against motor oil sludge and fuel deposits, and it contains special friction modifiers that help to reduce engine wear and tear. Pentosin HP 5W-30 is formulated for long service life intervals, making it an ideal choice for drivers who want to keep their engines running smoothly and efficiently. It meets service class API SL/CL and is a standard full synthetic oil.

Product Features:

• An all- season engine oil offering great protection against harsh start-up conditions and extreme temperature changes.
• Formulated for long service life intervals.
• Reduces engine oil sludge and fuel deposits.
• Contains special friction modifiers which help the engine run smoothly and improve fuel economy.
• Fully Synthetic Composition: PENTO HP 5W-30 1L is a fully synthetic engine oil, providing superior protection and performance for your vehicle’s engine.
• High Performance Formula: This engine oil is specifically designed for high performance vehicles with extended oil service intervals, ensuring optimal engine performance and longevity.

FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Suitable for modern engines: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs.

Mobil 1 ESP X2 full synthetic motor oil 0W-20 is designed to provide outstanding engine cleanliness, wear protection, and advanced fuel economy (1) to keep your engine running like new. This proprietary motor oil has been engineered to help prolong the life and maintain the efficiency of emission systems in new emerging diesel and gasoline-powered European vehicles that require SAE 0W-20 viscosity grades. Mobil 1 ESP has active cleaning agents that help to reduce deposits and sludge buildup for a cleaner engine. This technologically advanced formula helps to reduce oil aging with excellent oxidation stability for extended oil drain interval protection and offers low-temperature protection for quick cold-weather starting and ultra-fast protection. Mobil 1 ESP X2 0W-20 combines durability and protection with a low viscosity, low friction motor oil that was designed in cooperation with key European Original Equipment Manufacturers (OEMs). Mobil 1 is America’s leading synthetic motor oil brand at retail (1) , recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. To learn about the Mobil 1 Limited Warranty, visit Mobil.US. ( (1) Compared to Mobil 1 ESP Formula 5W-30. (2) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO Full Synthetic/ 52 weeks ending July 1, 2023)

Product Features:

• Mobil 1 ESP 0W-20 full synthetic oil is formulated for passenger car diesels with diesel particulate filters (DPFs) and gasoline catalytic converters (CATs)
• Engineered to help prolong the life and maintain the efficiency of emission systems in diesel and gasoline-powered European vehicles
• Low viscosity, low friction motor oil designed with key European Original Equipment Manufacturers to ensure durability and protection
• Active cleaning agents that help to reduce deposits and sludge buildup for a cleaner engines
• Excellent low temperature protection for quick cold-weather starting and ultra-fast protection
• Manufacturer Part Number: 125386
• Outstanding Engine Cleanliness and Wear Protection: Mobil 1 ESP X2 0W-20 is designed to keep your engine running like new by providing exceptional engine cleanliness and wear protection.
• Advanced Fuel Economy: This full synthetic motor oil helps improve fuel economy, making it an efficient choice for your vehicle.
• Excellent Oxidation Stability: The advanced formula helps reduce oil aging with excellent oxidation stability, allowing for extended oil drain intervals and providing low-temperature protection for quick cold-weather starts.

Pennzoil Ultra Platinum Full Synthetic motor oil is one of the best full synthetic motor oils in our portfolio. Made for extreme performance, Pennzoil Ultra Platinum outperforms conventional oils in terms of low temperature performance and volatility control. Our full synthetic motor oils are uniquely engineered from our revolutionary PurePlus Technology which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Because it is made from natural gas, the high quality base oil contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology creates one of the best formulations in our Pennzoil portfolio. At Pennzoil, our engineers and scientists have been involved in supporting motorsports teams through the development and delivery of dedicated motor oils that enable powerful engines. Our high-quality base oil and innovative generation of friction modifiers, detergent and anti-wear additives are carefully balanced and designed to withstand the high temperature, high stress environment in some IndyCar race engines and helps reduce frictional losses. The same Pennzoil Ultra Platinum SAE 0W-40 Full Synthetic Motor Oil that is used by Helio Castrovenes in his IndyCar engine is also available off-the-shelf and is specifically formulated for high performance. Pennzoil Ultra Platinum 0W-40 is the only motor oil trusted to be factory fill in every Chrysler SRT8 HEMI engine, and the SRT Viper. It is the only motor oil recommended in SRT engines. It is specifically fortified with a moly friction modifier that enables precise cam phaser rotation for accurate opening and closing of valves that helps deliver power when needed. (Chrysler, HEMI, SRT, and SRT8 are registered trademarks for Chrysler Group LLC).

Product Features:

• Full synthetic 0W-40 engine oil made from natural gas, not crude, using Pennzoil’s patented gas-to-liquid PurePlus Technology
• Feel the difference of next level performance, on or off the track, with Pennzoil Ultra Platinum, motor oil designed to deliver complete engine protection.
• Pennzoil 0W-40 is a carbon neutral motor oil, achieved through verified Nature Based Carbon Credits that offset the CO2 lifecycle emissions
• Helps protect engines from loss of power and provides better fuel economy-drive on average an extra 550 miles per year (versus a dirty engine)
• Pennzoil Ultra Platinum 0W-40 is the only motor oil trusted to be factory fill in every Chrysler┬« SRT8┬« HEMI┬« engine, and the SRT┬« Viper. (Chrysler, HEMI, SRT, and SRT8 are registered trademarks of Chrysler Group LLC)
• Delivers unsurpassed sludge protection to help keep high-performance and luxury car engines as close as possible to factory clean (Based on Sequence VH Sludge Test using SAE 5W-20)
• Formulated to provide faster low-temperature oil flow and protection in extreme heat
• Pennzoil is the first motor oil made from natural gas, not crude- PurePlus Technology converts pure natural gas into high-quality, full-synthetic base oil that’s crystal clear and contains fewer impurities than other traditional and synthetic motor oils
• The same motor oil used by Helio Castroneves in his IndyCar- Penske IZOD IndyCar series cars use Pennzoil Ultra Platinum 0W-40.
• Extreme Performance: Designed for high performance, this motor oil outperforms conventional oils in low temperature performance and volatility control, making it ideal for demanding driving conditions.
• Advanced Additive Technology: Fortified with a moly friction modifier, this oil enables precise cam phaser rotation for accurate valve timing, delivering power when needed and extending engine life.

Pennzoil Platinum High Mileage SAE 5W-30 is a full synthetic motor oil that is uniquely engineered from our revolutionary PurePlus gas-to-liquid technology which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Because it is made from natural gas, the base oil is 99.5% pure, contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology, creates one of the best formulations in our Pennzoil high mileage portfolio. As your car ages, leaks may develop and cause higher oil consumption and oil burn off, potentially causing your engine to need frequent top-offs. Pennzoil Platinum High Mileage motor oil is enhanced with an excellent combination of special conditioning seal agents and additives to help stop leaks from seals and reduce the oil consumption that is typical of older and worn engines. Our full synthetic high mileage motor oil also protects engines from loss of horsepower, offers excellent performance in extreme temperatures, provides unsurpassed wear protection, and protection against abnormal combustion phenomenon like low-speed pre-ignition observed in modern turbocharged gasoline direct injection (TGDI) engines. Pennzoil Platinum High Mileage SAE 5W-30 is also engineered to help keep engines clean by gently lifting deposits and keeping them away from critical moving engine parts. In fact, it keeps pistons up to 50% cleaner than the toughest industry standards.

Product Features:

• Full synthetic 5w-30 engine oil made from natural gas, not crude, using pennzoil’s patented gas-to-liquid pureplus technology
• Designed for for vehicles with over 75,000 miles
• Pennzoil platinum high mileage 5w-30 keeps pistons up to 45% cleaner than the toughest industry standard (based on sequence iiih results)
• No other leading high mileage engine oil provides better protection from friction (based on sequence iva wear test using sae 5w-30)
• Formulated to deliver less oil burn off than high mileage engine oils made from crude oil
• Helps protect engines from loss of horsepower
• Provides faster low-temperature oil flow and protects in extreme heat

FRAM Engine Oil SAE 5W-20 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-20 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Reliable engine protection: FRAM Conventional Oil 5W20 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.

Mobil Super 10W-40 synthetic blend motor oil helps to extend your engine life and provide engine protection up to 5,000 miles for gasoline cars and light-duty trucks. Mobil Super has 15 percent extra cleaning additives to help prevent the formation of sludge and deposits when compared to Mobil conventional motor oil. Helps to get your engine cleaner, conserve viscosity for easier cold starting, and provide outstanding engine wear protection under a variety of operating conditions. Meets or exceeds the requirements of: API SN, SM, SL, API SN Plus. (Or your vehicle’s OEM recommended oil change interval, whichever is longer. Some limitations apply, see Mobil Super Limited Warranty: https://www.mobil.com/en/lubricants/for-personal-vehicles/our-products/mobil-limited-warranties/mobil-super-limited-warranty)

Product Features:

• Mobil Super synthetic blend motor oil 10W-40 works to protect your engine from sludge and deposits for up to 5,000 miles
• Helps to keep your engine clean with 15 percent extra cleaning additives, preventing sludge and deposit formation
• Works to provide outstanding engine wear protection under a variety of operating conditions
• Enhanced formulation (vs. Mobil basic conventional oil ) helps to conserves oil viscosity for easier cold starting
• Recommended for gasoline cars and light-duty trucks
• Manufacturer Part Number: 124402

Castrol EDGE with Fluid TITANIUM Technology is Castrol’s strongest oil and the natural choice for drivers who want the best combination of sludge protection, wear protection and maximum engine performance. Unlock maximum performance with every drive. Today’s engines are smaller, more powerful and under more pressure than ever before. Castrol EDGE has been engineered to withstand the stress of modern engines and provides 10X better high temperature performance than the latest industry standard. Did you know that friction can waste up to 10% of an engine’s performance? Increased demands placed on the engine to deliver power and fuel efficiency create intense friction between critical engine parts. Castrol EDGE transforms its structure under pressure to keep metal apart and reduce friction for maximum engine performance and delivers 6X better wear protection than required by the latest Sequence IVA test limits.

Product Features:

• 3X Stronger against viscosity breakdown than leading full synthetic (Based on Kurt Orbahn test in 5W-30 grade)
• 10X Better High Temperature performance (As measured in Sequence IIIH engine test vs. API SP test limit)
• 6X Better Wear Protection
• 1.4X Better Sludge Protection (As measured in Sequence VH engine test vs. API SP test limit)
• Advanced Fluid TITANIUM Technology: Castrol EDGE with Fluid TITANIUM Technology transforms its structure under pressure to keep metal parts apart and reduce friction, ensuring maximum engine performance.
• Full Synthetic Composition: As a full synthetic motor oil, Castrol EDGE 5W-20 offers enhanced performance and protection compared to conventional oils.
• Optimal for Modern Engines: Designed to meet the demands of today’s smaller, more powerful engines, ensuring they run smoothly and efficiently under intense conditions.

Pennzoil Platinum full synthetic SAE 10W-30 motor oil is uniquely engineered from our revolutionary PurePlus gas-to-liquid technology, which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Our high-quality base oil is 99.5% pure, contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology creates one of the best formulations in our Pennzoil portfolio. Modern engine technologies have evolved over the years and today’s engine parts have reached an unprecedented level of fine manufacturing tolerances which require a high-quality engine oil to help provide complete engine protection. This includes protection against abnormal combustion phenomenon like low-speed pre-ignition observed in modern turbocharged gasoline direct injection (TGDI) engines. Our Pennzoil Full Synthetic products are engineered for modern engines and offer the following benefits without compromise. Better Fuel Economy. With Pennzoil Platinum full synthetic motor oil, you can drive on average an extra 550 miles vs a dirty engine. Protects Horsepower. Pennzoil Platinum Full Synthetic motor oil helps protect against loss of power by helping to protect your engine against wear and deposit formation. Unsurpassed Wear Protection. When it comes to protecting the internal parts of your engine from metal-on-metal contact, no other leading synthetic motor oil provides better wear protection than Pennzoil Platinum Full Synthetic motor oil. Excellent Temperature Performance. When exposed to extreme cold temperatures, Pennzoil Platinum Full Synthetic motor oil flows faster, meaning that the motor oil travels quickly to lubricate the various engine parts.

Product Features:

• Provides better fuel economy-drive on average an extra 550 miles per year (versus a dirty engine)
• Pennzoil Platinum 10W-30 keeps pistons up to 45% cleaner than the toughest industry standard (Based on Sequence IIIH results)
• No other leading synthetic oil provides better wear protection from friction (Based on Sequence IVA wear test using SAE 5W-30)
• Formulated to provide faster low-temperature oil flow and protection in extreme heat
• Helps protect engines from loss of power
• Formulated for modern turbocharged engines-GF-6, API SP/SP-Resource Conserving and all previous categories
• Revolutionary PurePlus Technology: Engineered from Pennzoil’s patented PurePlus gas-to-liquid technology, converting pure natural gas into high-quality, full synthetic base oil that is 99.5% pure.
• Superior Wear Protection: Offers unsurpassed protection against metal-on-metal contact, ensuring the internal parts of your engine are well-protected from wear and deposit formation.
• Engine Protection for Modern Technologies: Specially designed to protect against low-speed pre-ignition in modern turbocharged gasoline direct injection (TGDI) engines, providing complete engine protection.

Pentosin HP 5W-30 Synthetic Motor Oil is a high-performance engine oil that is fully synthetic and designed for modern vehicles with extended oil service intervals. It is suitable for use in both gasoline and diesel engines, including those with turbochargers, as well as non-turbocharged vehicles that require 5W-30 oil. This all-season motor oil offers excellent protection against motor oil sludge and fuel deposits, and it contains special friction modifiers that help to reduce engine wear. Pentosin HP 5W-30 Synthetic Motor Oil is formulated for long service life intervals, making it an ideal choice for drivers who want to keep their engines running smoothly and efficiently. It meets service class API SL,CL.

Product Features:

• An all- season engine oil offering great protection against harsh start-up conditions and extreme temperature changes.
• Formulated for long service life intervals.
• Reduces engine oil sludge and fuel deposits.
• Contains special friction modifiers which help the engine run smoothly and improve fuel economy.
• Fully Synthetic Formula: Pento High Performance Engine Oil is made with a full synthetic formula, providing superior protection and performance for your engine.
• Meets API SL/CL Specs: This engine oil meets the latest API SL/CL specifications, ensuring that it meets the highest standards for engine protection and performance.

FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos®1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos®1 Gen 3 motor oil.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Excellent sludge and varnish protection
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-30 meets stringent API: SP, SN, SM, SL, SJ, GM dexos«1 Gen 3, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
• Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of premature engine failure.
• Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
• Versatile Compatibility: Suitable for use in carbureted, normally fuel-injected engines, and the rigorous environment of GDI and TGDI engines, offering broad application versatility.
• Fully Licensed GM dexos«1 Gen 3: This oil is a fully licensed GM dexos«1 Gen 3 motor oil, ensuring it meets the high standards set by General Motors for optimal engine performance.

FRAM Engine Oil SAE 20W-50 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 20W-50 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 20W-50 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-Speed Pre-Ignition Control
• Chain Wear Protection
• Piston Cleanliness
• Turbo-Compatibility
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• High-Quality Conventional Base Stocks: FRAM Engine Oil SAE 20W-50 utilizes a blend of high-quality conventional base stocks for reliable engine protection.
• Versatile Compatibility: Suitable for modern gas-direct engines (GDI), turbo gas-direct engines (TGDI), and older carbureted or normally fuel-injected gasoline engine designs.
• Meets Industry Standards: Complies with API SP, SN Plus, SN, SM, and ILSAC GF-6A, GF-5, and earlier API and ILSAC Service Categories.
• Broad Operating Range: Designed to provide reliable engine protection across a broad range of operating conditions.

FRAM Engine Oil SAE 5W-20 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-20 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Reliable engine protection: FRAM Conventional Oil 5W20 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.

FRAM Full Synthetic EURO Formula 5W-40 is premium fully synthetic motor oil formulated  with high quality synthetic base oils and the latest additive technology to provide the ultimate  protection for your engine. FRAM Full Synthetic EURO Formula 5W-40 has superior detergency  to provide engine cleanliness yet is formulated as a Mid-SAPS oil to protect emissions control  systems including diesel particulate filters (DPF). This engine oil meets the performance  requirements of many European OEM specifications including Mercedes Benz, Volkswagen,  BMW, Renault, Porsche, Peugeot and GM dexos2®.

Product Features:

• Outstanding thermal and oxidation stability
• Excellent sludge and varnish protection
• DPF compatible
• Volatility: Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Premium Full Synthetic Formula: FRAM Full Synthetic EURO Formula 5W-40 is crafted with high-quality synthetic base oils and the latest additive technology for ultimate engine protection.
• Superior Engine Cleanliness: This motor oil boasts superior detergency, ensuring your engine remains clean and efficient.
• Meets European OEM Specifications: Complies with the performance requirements of leading European car manufacturers such as Mercedes Benz, Volkswagen, BMW, Renault, Porsche, Peugeot, and GM dexos2«.
• Optimal Viscosity: With an SAE oil weight of 5W-40, this oil provides excellent performance in a wide range of temperatures, ensuring reliable engine operation.

FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.

Castrol EDGE 10W-60 is approved for use in automobile gasoline and diesel engines. This formulation held BMW’s exclusive approval for BMW M-Models from 2000-2014.

Product Features:

• Approved and Licensed Specifications include: ACEA A3/B3, A3/B4, API SN/CF, BMW Approved fpr BMW M-Models, VW 501 01 / 505 00

FRAM Engine Oil SAE 10W-40 engine oil utilizes high-quality base stocks and a robust  additive system to provide reliable engine protection across a broad range of operating  conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine  designs. FRAM Engine Oil SAE 10W-40 contains additive technology designed to prevent  low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and  shear stability over previous oil categories. The FRAM Engine Oil SAE 10W-40 meets the  requirements for API SP, SN Plus, SN, SM and earlier API Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.

Pennzoil Platinum Euro is designed for complete protection and performance for European vehicles. Pennzoil Platinum Euro helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first. Guaranteed.1 Pennzoil Platinum Euro is made from natural gas, not crude. Its base oil is 99.5% free from engine clogging impurities. The Proof is in the Pennzoil. 1 Based on Sequence IIIH results . Does not apply to Pennzoil Platinum Euro motor oil.

Product Features:

• No other leading engine oil provides better protection from friction1? 1 based on sequence iva wear test using sae 0w-40.
• Better fuel economy2 2 meets the requirements of mb 229.5 which includes fuel economy improvement (fei) requirement as determined in industry standard gasoline engines
• Protects horsepower
• Nothing keeps your engine close to factory clean3 3 based on sequence vh and m-111 sludge test using sae 0w-40.
• Complete protection and performance for European vehicles.
• Extends engine life and protects for up to 15 years or 500,000 miles, whichever comes first.

Castrol EDGE SUPERCAR 10W-60 Full Synthetic Motor Oil is for drivers who demand maximum engine performance. This advanced full synthetic oil with Fluid Titanium Technology transforms to be strongest when engine pressure is most severe, reducing power-robbing friction across engine speeds and conditions. Recommended by world-leading car manufacturers, it meets or exceeds industry standards such as API CF/SN and ACEA A3/B4, and is approved for BMW M-models and VW 501 01/505 00. Trusted to perform in high-performance vehicles like the Aston Martin V8 Vantage S, Audi R8 V10 GT, Bugatti Chiron, Ferrari F12 Berlinetta, and Koenigsegg engines, it is the ultimate engine oil to unlock exhilarating performance with every drive.

Product Features:

• Transforms to be stongest when engine pressure is most severe
• Reduces power robbing friction across engine speeds and conditions
• Recommended by world leading car manufacturers
• Meets API CF/SN, ACEA A3/B4, Approved for BMW M-models, VW 501 01/505 00
• MEETS OR EXCEEDS INDUSTRY STANDARDS: ACEA A3/B3, A3/B4; API SN/CF; Approved for VW 501 01/ 505 00
• TRUSTED TO PERFORM: Approved for BMW M-Models, Approved for use in Koenigsegg engines, Suitable for use in Aston Martin V8 Vantage S, Audi R8 V10 GT, Bugatti Chiron, Bugatti Veyron, Ferrari F12 Berlinetta, Ferrari FF, and Koenigsegg engines.
• Full Synthetic Composition: Provides superior protection and performance with a 10W-60 SAE oil weight, ideal for demanding driving conditions.

Mobil Super Synthetic 10W-30 full synthetic motor oils are engineered to provide outstanding engine protection in a wide variety of weather and driving conditions. Mobil Super helps to protect critical engine parts across a broad range of temperatures (up to 400 degrees Fahrenheit) without oxidative oil thickening and oil breakdown. Mobil Super Synthetic oils are specially formulated to help protect engines of all ages, and allows easy starting and rapid oil circulation during cold starts to protect critical engine parts. Meets or exceeds the latest industry specifications and API SN resource conserving. For our ultimate in performance and protection, consider our Mobil 1 motor oils, a family of advanced full synthetic engine oil.

Product Features:

• Full synthetic motor oil engineered to provide outstanding engine protection for vehicles of all ages in a wide variety of weather and driving conditions
• Helps to protect critical engine parts across a broad range of temperatures (up to 400 degrees F) without oxidative oil thickening and oil breakdown
• Specially formulated to help easy starting and rapid oil circulation during cold starts to protect critical engine parts
• Helps to control oil consumption and loss and provides protection beyond our conventional-synthetic blended products
• Meets or exceeds the latest industry specifications and API SN resource conserving