Chevrolet Corvette Suspension Parts

Product Features:

• Incredible Improvement in Control
• Maintains Proper Caster and Camber Alignment
• Increase in Handling and Control
• Greatly Reduce Wheel Hop on Quick Acceleration
• Even Braking Control is Improved
• Better Suspension Stability

aFe Control is proud to release the PFADT Series Rear Shock Spherical Bearing Kit for the 97-13 Corvette. OE factory shock bushings are soft rubber and know to deteriorate over time. Add in serious track use or a coilover conversion and they are guaranteed to fail. The aFe Control kit replaces the rubber shock bushings with mono-ball spherical joints to eliminate friction and deflection. This high quality kit features 6061-T6 aluminum bearing housings which feature a special Mil-Spec high corrosion resistant anodizing and CNC machined 6061-T6 articulation spacers. The replaceable bearings are Teflon lined for minimum friction, zero maintenance and are manufactured by FK bearing in the USA. This kit is designed to maximize the performance of your Corvettes suspension.

Product Features:

• TIG Welded Construction
• Stainless Steel
• Zerk Fittings and Grooved Bushings

Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:

• Made of Superior Hyper-Flex+ Material
• Adds Dramatic Amount of Performance/Durability
• Helps Vehicle Be in Control
• Allows the Suspension to Function Properly

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Complete with shackle plates and bushings
• No Squeak
• Rubber or Heat Treated bushings
• Restores ride height

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:

• REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
• EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
• CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
• LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
• IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
• Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
• 5/8 nitrocarburized rod for long service life.
• Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.

Product Features:

• Help Maintain Proper Rear Toe and Caster
• During High Performance Driving Conditions
• Important When Using Larger Wheels/Tires

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Grade 5 or higher bolt/pin
• No Squeak
• Reduces vibration

aFe Control is proud to release the PFADT Series, Solid Spherical Control Arm Bearing Set for the 97-13 Corvette. OE factory bushings are known to deflect more than a ¼ inch in turns which equates to almost 1 degree of lost camber and unpredictable handling. Serious racers finally have an engineered solution for solid spherical control arm bearings. The elimination of bushing deflection has a number of benefits. The camber required is reduced because no camber change is seen from bushing deflection, resulting in more consistent lap times and a reduction in tire wear. Steering response is greatly improved and becomes sharp, crisp and predictable in all situations. The aFe Control kit replaces all 18 control arm bushings with mono-ball, spherical joints to eliminate friction and deflection. With 108 total components this high quality kit features 6061-T6 aluminum bearing housings which feature a special, Mil spec high corrosion resistant anodizing, CNC machined heat treated 17-4 PH stainless steel shafts, and CNC machined 6061-T6 articulation spacers. The replaceable bearings are Teflon lined for minimum friction, zero maintenance and are manufactured by FK bearing in the USA. This kit is designed to maximize the performance of your race car suspension. Due to the nature of this race part there is an increase in road noise, therefore we do not recommend this for the casual street car and is highly recommended for dedicated track cars.

Product Features:

• Reduces Busing Deflection
• For Both Track And Street Use
• Excellent Grease Retention
• Quiet Operation

This shock absorber control actuator connector is designed to match the fit and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this pigtail harness matches the fit and function of the original electrical connector on specified vehicles equipped with magnetic shock absorbers
• Convenient solution – this connector splices into the vehicle’s electrical harness when the original part has become damaged
• Effective repair – install when replacing shock absorbers to ensure proper system function and prevent warning lights
• Quality assured – backed by a team of product experts in the United States and more than a century of automotive experience

aFe Control’s ESD (electronic shock delete) is a simple plug and play module that eliminates the suspension control check engine light allowing instillation of aftermarket shocks or coilovers on vehicles previously equipped with GM “MagneRide” electronic shock absorbers. A body control module check engine light will limit vehicle speeds to 80mph if not bypassed. This ESD kit is sold in sets of four, one for each shock, and features anodized extruded aluminum heat sinks, GM style Metri-Pack connectors, and abrasion resistant braided wiring shields. Gen 2 ESD kit, characterized by large Metri-Pack connector, fits the following vehicles: 97-04 C5 Corvette, 05-13 C6 Corvette, 09-13 Cadillac CTS-V.

Product Features:

• Simple Plug and Play
• Eliminates Suspension Control Check Engine Light
• Anodized Extruded Aluminum Heat Sinks
• GM Style Metri-Pack Connectors

The 461-401001-A aFe Control PFADT Series Spherical Rebuild offers the components to rebuild 1 PFADT series front upper control arm spherical bushing kit, for the 1997-2013 Chevrolet Corvette (C5/C6). If you would like to rebuild 2 front upper control arms, you will need to order 2 kits.

Product Features:

• Incl. Components To Service 1 Rear Upper Control Arm
• 2 CNC Machined Heat Treated 17-4 PH Stainless Steel Shafts
• 2 Teflon Lined FK Bearings
• 4 Snap Rings

The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.

Product Features:

• Adds Up To 25% More Damping Performance Over Original Equipment Shocks
• Components And Valving Designed Specifically For Your Corvette
• Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
• High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
• Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
• The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
• Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.

Valvoline DEXRON®-VI ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors’ DEXRON®-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON®-II and/or DEXRON®-III are recommended. Recommended for use in the following applications: DEXRON®-VI, DEXRON®-III, DEXRON®-II, and Allison C-4.

Product Features:

• Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Shock Absorber Grommet. 1 In. bottom O.D. 3/4 In. high, with 5/8 In. I.D. Each.

Product Features:

• Jet black to match the color of the original part
• Dense rubber to match the original
• Exact fit
• High quality original equipment replacement part
• Made in the USA

PITMAN ARM LINK SEAL

aFe Control is proud to introduce the Johnny O’Connell signature series shock package for the 2014-2015 Chevrolet Corvette C7. These Shocks are tuned by Johnny O’Connell himself and made to the exact travel and durability requirements as the OEM shocks. These are the only OEM quality replacements on the market. Perfectly matched to the Johnny O’Connell sway bars, these shocks will make for a complete transformation in your C7 Corvettes performance ride.

Product Features:

• Ride Height Adjustable
• Damping Adjustable For Rebound And Compression
• Lightweight Hard Anodized 6061 T6 Steel Alum. Bodies
• High Strength While Still Maintaining Lightweight Design

Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

• Protects the shock’s piston rod from damage
• Universal design for easy installation
• Tie-strap included for a secure fit
• Constructed from high quality urethane for maximum durability
• Multiple color choices available

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Front Coil Spring Insulator. Each.

Product Features:

• Jet black to match the color of the original part
• Dense rubber to match the original
• Exact fit
• High quality original equipment replacement part
• Made in the USA

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

• EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
• HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
• COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
• Construction and design validated by MOOG engineers
• Broad coverage for foreign and domestic applications
• R-Series (RK) products are the right choice for value-driven repair