2009 Chevrolet Corvette Suspension Parts

aFe Control is proud to release the PFADT Series Rear Shock Spherical Bearing Kit for the 97-13 Corvette. OE factory shock bushings are soft rubber and know to deteriorate over time. Add in serious track use or a coilover conversion and they are guaranteed to fail. The aFe Control kit replaces the rubber shock bushings with mono-ball spherical joints to eliminate friction and deflection. This high quality kit features 6061-T6 aluminum bearing housings which feature a special Mil-Spec high corrosion resistant anodizing and CNC machined 6061-T6 articulation spacers. The replaceable bearings are Teflon lined for minimum friction, zero maintenance and are manufactured by FK bearing in the USA. This kit is designed to maximize the performance of your Corvettes suspension.

Product Features:

• TIG Welded Construction
• Stainless Steel
• Zerk Fittings and Grooved Bushings

aFe Control is proud to release the PFADT Series, Lowering Kit for the Chevrolet Corvette C6 & C7 models. This lowering kit is designed to lower up to 1.25 IN to enhance the sleek body lines, while giving it a more aggressive, stylish look. Designed to work with the factory transverse leaf springs, the package includes 4 lowering bolts. These aren’t ordinary bolts, unlike the factory bolt and pad, our bolts feature a CNC, machined stainless steel stud with wrench flats, mated to a articulating foot, and a nylon foot pad. This design offers years of corrosion resistance and smooth suspension articulation, and quiet operation. Designed as a direct fit installation, no modifications is necessary. The lowering kit can be used with factory shock absorbers, or for a even better ride.

Product Features:

• 1.25 IN drop for correct relation between looks and function
• Stainless steel CNC machined adjuster stud w/ wrench flats
• Articulating ball stud for perfect alignment
• Nylon foot pads for smooth articulation and quiet operation

The 461-401001-A aFe Control PFADT Series Spherical Rebuild offers the components to rebuild 1 PFADT series front upper control arm spherical bushing kit, for the 1997-2013 Chevrolet Corvette (C5/C6). If you would like to rebuild 2 front upper control arms, you will need to order 2 kits.

Product Features:

• Incl. Components To Service 1 Rear Upper Control Arm
• 2 CNC Machined Heat Treated 17-4 PH Stainless Steel Shafts
• 2 Teflon Lined FK Bearings
• 4 Snap Rings

The 461-401001-A aFe Control PFADT Series Spherical Rebuild offers the components to rebuild 1 PFADT series front upper control arm spherical bushing kit, for the 1997-2013 Chevrolet Corvette (C5/C6). If you would like to rebuild 2 front upper control arms, you will need to order 2 kits.

Product Features:

• Incl. Components To Service 1 Front Or Rear Lower Control Arm
• 2 Teflon Lined FK Bearings
• 2 Snap Rings
• 0.5ml Bottle Loctite 620

Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.

Product Features:

• Available for import and domestic passenger cars
• Gas-charged unit
• Improved handling and control
• Economical OE replacement
• Meets OE product specifications

Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

• REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
• EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
• CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
• CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
• IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
• Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
• 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
• Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.

Product Features:

• Adds Up To 25% More Damping Performance Over Original Equipment Shocks
• Components And Valving Designed Specifically For Classic Cars
• Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
• High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
• Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
• The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
• Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.

Valvoline DEXRON®-VI ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors’ DEXRON®-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON®-II and/or DEXRON®-III are recommended. Recommended for use in the following applications: DEXRON®-VI, DEXRON®-III, DEXRON®-II, and Allison C-4.

Product Features:

• Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:

• Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
• Formulated to help prevent gear wear and protect against rust and corrosion
• Formulated to deliver enhanced protection against deposits
• Helps provide better protection during extreme operating conditions

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

• Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

aFe Control is proud to release the PFADT Series, Solid Spherical Control Arm Bearing Set for the 97-13 Corvette. OE factory bushings are known to deflect more than a ¼ inch in turns which equates to almost 1 degree of lost camber and unpredictable handling. Serious racers finally have an engineered solution for solid spherical control arm bearings. The elimination of bushing deflection has a number of benefits. The camber required is reduced because no camber change is seen from bushing deflection, resulting in more consistent lap times and a reduction in tire wear. Steering response is greatly improved and becomes sharp, crisp and predictable in all situations. The aFe Control kit replaces all 18 control arm bushings with mono-ball, spherical joints to eliminate friction and deflection. With 108 total components this high quality kit features 6061-T6 aluminum bearing housings which feature a special, Mil spec high corrosion resistant anodizing, CNC machined heat treated 17-4 PH stainless steel shafts, and CNC machined 6061-T6 articulation spacers. The replaceable bearings are Teflon lined for minimum friction, zero maintenance and are manufactured by FK bearing in the USA. This kit is designed to maximize the performance of your race car suspension. Due to the nature of this race part there is an increase in road noise, therefore we do not recommend this for the casual street car and is highly recommended for dedicated track cars.

Product Features:

• Reduces Busing Deflection
• For Both Track And Street Use
• Excellent Grease Retention
• Quiet Operation

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Reduces vibration
• Torsional rubber bushings
• UV resistant
• No Squeak

Control Arm Bushing

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

aFe Control’s ESD (electronic shock delete) is a simple plug and play module that eliminates the suspension control check engine light allowing instillation of aftermarket shocks or coilovers on vehicles previously equipped with GM “MagneRide” electronic shock absorbers. A body control module check engine light will limit vehicle speeds to 80mph if not bypassed. This ESD kit is sold in sets of four, one for each shock, and features anodized extruded aluminum heat sinks, GM style Metri-Pack connectors, and abrasion resistant braided wiring shields. Gen 2 ESD kit, characterized by large Metri-Pack connector, fits the following vehicles: 97-04 C5 Corvette, 05-13 C6 Corvette, 09-13 Cadillac CTS-V.

Product Features:

• Simple Plug and Play
• Eliminates Suspension Control Check Engine Light
• Anodized Extruded Aluminum Heat Sinks
• GM Style Metri-Pack Connectors

aFe Control’s ESD (electronic shock delete) is a simple plug and play module that eliminates the suspension control check engine light allowing instillation of aftermarket shocks or coilovers on vehicles previously equipped with GM “MagneRide” electronic shock absorbers. A body control module check engine light will limit vehicle speeds to 80mph if not bypassed. This ESD kit is sold in sets of four, one for each shock, and features anodized extruded aluminum heat sinks, GM style Metri-Pack connectors, and abrasion resistant braided wiring shields. Gen 2 ESD kit, characterized by large Metri-Pack connector, fits the following vehicles: 97-04 C5 Corvette, 05-13 C6 Corvette, 09-13 Cadillac CTS-V.

Product Features:

• Simple Plug and Play
• Eliminates Suspension Control Check Engine Light
• Anodized Extruded Aluminum Heat Sinks
• GM Style Metri-Pack Connectors

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Restores vehicle handling
• OE replacement
• Reduces vibration
• Reduces tire wear

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Restores vehicle handling
• OE replacement
• Reduces vibration
• Reduces tire wear

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

• EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
• HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
• COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
• Construction and design validated by MOOG engineers
• Broad coverage for foreign and domestic applications
• R-Series (RK) products are the right choice for value-driven repair

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

aFe Control is proud to introduce the Johnny O’Connell signature series shock package for the 2014-2015 Chevrolet Corvette C7. These Shocks are tuned by Johnny O’Connell himself and made to the exact travel and durability requirements as the OEM shocks. These are the only OEM quality replacements on the market. Perfectly matched to the Johnny O’Connell sway bars, these shocks will make for a complete transformation in your C7 Corvettes performance ride.

Product Features:

• Ride Height Adjustable
• Damping Adjustable For Rebound And Compression
• Lightweight Hard Anodized 6061 T6 Steel Alum. Bodies
• High Strength While Still Maintaining Lightweight Design

aFe Control is proud to introduce the Johnny O’Connell signature series shock package for the 2014-2015 Chevrolet Corvette C7. These Shocks are tuned by Johnny O’Connell himself and made to the exact travel and durability requirements as the OEM shocks. These are the only OEM quality replacements on the market. Perfectly matched to the Johnny O’Connell sway bars, these shocks will make for a complete transformation in your C7 Corvettes performance ride.

Product Features:

• Ride Height Adjustable
• Damping Adjustable For Rebound And Compression
• Lightweight Hard Anodized 6061 T6 Steel Alum. Bodies
• High Strength While Still Maintaining Lightweight Design

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function