Chevrolet Colorado Performance and Racing Products
Top Chevrolet Colorado Performance and Racing Products Categories
We carry over 90 Performance and Racing Products in inventory for the Chevrolet Colorado. If you’re looking for aftermarket Performance and Racing Products for your Chevrolet Colorado, check out all these categories:
Essential Chevrolet Colorado Performance and Racing Products
aFe POWER – Power Module (Part No.77-84013)
from
$581.99
Power Module
K&N – Cold Air Intake: Adds Up To 9 Horsepower, With Washable Air Filter (Part No.63-3064-1)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
B & M – Shift Improver Kit For 93-02 4L60E (Part No.70360)
from
$86.99
The B&M Shift Improver Kit the easiest way to get the performance you’ve always wanted out of your automatic transmission, two modes to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit.
Product Features:
See More
Product Features:
- Provides Crisp Shifts
- On Any Stock Automatic Transmission
- Eliminates Soft/Sluggish Shift
- Eliminates Shift Overlap
- Eliminate Clutch and Band Wear
- Improves Transmission Life
- Transmission Removal Not Required
Energy Suspension – Transmission Mount (Part No.3.1129G)
from
$97.99
A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.
Product Features:
See More
Product Features:
- Unique Safety Interlock Design
- Impervious to Vehicle Oils and Chemicals
- Strong Enough Too Handle High Performance
Motive Gear – Performance Differential Ring and Pinion (Part No.G885308)
Hypertech – Max Energy Spectrum Power Programmer for California: Adds up to 131HP, Improves Throttle Response (Part No.3050)
from
$399.99
The Max Energy Spectrum Power Programmer delivers more power-per-dollar than any other bolt-on on the market today. Plus, it installs in less than 15 minutes without using tools or getting your hands dirty. Our award-winning Power Tuning adds maximum horsepower, torque, and performance for any kind of driving for vehicles using regular, premium, E85, as well as diesel fuel. The Max Energy Spectrum also has a larger backlit LCD screen for quick and easy setup and user-friendly navigation for simple installation, tuning, and feature options.
Product Features:
See More
Product Features:
- Optimized engine tuning
- Adjustable rev limiter/speed limiter
- Speedometer correction for multiple tire sizes and gear ration changes
- Adjustable shift firmness and shift points
- Throttle adjustments
- Cooling fan on/off temperatures
- Return back to factory settings
- Reads/Displays/Clears Diagnostic Trouble Codes (DTC’s)
- Internet updateable
B & M – Automatic Shifter, Magnum Grip Street Bandit (Part No.81050)
from
$799.99
The B&M Racing Street Bandit Pistol-grip shifter is perfect for the person looking for a gated performance shifter in a compact good looking package which can be mounted in door cars. The Street Bandit features replaceable 2, 3 or 4 speed forward pattern gate plates along with a 3 speed reverse pattern gate plate, all guaranteeing you won’t miss a shift. Other features include a back-up light switch, neutral safety switch, brushed aluminum cover, CNC aluminum Magnum Grip shift handle, a 5ft Super Duty cable, all brackets, levers and instructions for an easy installation. Be sure to check out all our optional side grip plates including real Rosewood engraved with the B&M logo part #81086, CNC billet aluminum side plates with 12 volt micro-switch #81060, 81063, 81078 and coming soon optional colored side plates to customize the look of the shifter. Also see optional floor mounting bracket #80884
Product Features:
See More
Product Features:
- Ideal For High-Tech Pro-Street
- Ideal For High-Tech Street Rods
- Narrow Styled Aluminum Housing
- Includes Neutral Safety Switch
- Includes Backup Light Switch
- Includes Billet Aluminum Knob
- Can Be Used w/Reverse Pattern Valve Body
K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Washable Air Filter (Part No.77-3088KP)
from
$472.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque.
- Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
- Engineered to provide high airflow and exceptional filtration.
- Replaces factory air filter and intake tube.
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
- Typical installation can be completed in 60 minutes or less with simple hand tools.
- No-Hassle Lifetime Limited Warranty.
- Will not void vehicle warranty(limited)
GM Genuine Parts – Nitrogen Oxides Sensor (Part No.24000395)
from
$361.99
ACDelco GM Original Equipment NOx (Nitrogen Oxide) Sensors are exhaust gas sensors that detect the nitrogen oxide content of exhaust from diesel engines, and are GM-recommended replacements for your vehicle’s original components. The information from these sensors is used by the engine control module (ECM) to adjust various parameters to help reduce harmful emissions. These original equipment nitrogen oxide sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Detects the nitrogen oxide content of the exhaust to help optimize emissions
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
K&N – Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (Part No.E-0773)
from
$83.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
- REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
- ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply
- EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
K&N – Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (Part No.33-2408)
from
$68.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
- REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
- ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply
- EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
Competition Cams – High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6. (Part No.812-1)
from
$13.99
High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6.
B & M – Tork Master 2000: Value-Priced Street Performance Torque Converter (Part No.70420)
from
$459.99
Similar in performance to the Holeshot series, the Tork Master is B&M’s lowest cost torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
B & M – Tork Master 2400 (Part No.70418)
from
$483.99
Torque Converter – Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) APPLICATION: Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) The Tork Master is B&M’s lowest cost pe
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
B & M – Torque Converter, Holeshot 3000 (Part No.70421)
from
$921.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Dynomax – Exhaust Intermediate Pipe (Part No.53751)
from
$153.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from stainless steel for durability and long life
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-1017)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N’s Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- Limited Warranty
Product Features:
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-7003)
from
$13.99
K&N Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available. K&N cartridge oil filters trap harmful contaminants while the filter’s construction allows for high oil flow rates. All K&N oil filters are manufactured to meet stringent engineering standards. They are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturer’s recommended service intervals.
Product Features:
See More
Product Features:
- High performance design for outstanding filtration
- High-efficiency media with uniform pleats
- Allows for high oil flow rates
- Ideal for high-end synthetic motor oil
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Competition Cams – XFI RPM HI-LIFT 212/218 Hydraulic Roller Cam (Part No.54-424-11)
from
$541.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.
Product Features:
See More
Product Features:
- Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
- Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
- Provides outstanding low RPM torque with increased stability.
Competition Cams – XFI RPM 212/218 Hydraulic Roller Cam (Part No.54-412-11)
from
$541.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.
Product Features:
See More
Product Features:
- Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
- Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
- Provides outstanding low RPM torque with increased stability.
Competition Cams – XFI XE-R 224/230 Hydraulic Roller Cam (Part No.54-444-11)
from
$541.99
HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.
Product Features:
See More
Product Features:
- HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.
- 273/279 Advertised Duration, 224/230 Duration @ .050″, .581″/.588″ Lift, 114 Lobe Separation
- Use Beehive Valve Spring part No. 26918-16 with this camshaft
Competition Cams – XFI XE-R 238/240 Hydraulic Roller Cam (Part No.54-448-11)
from
$541.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.
Product Features:
See More
Product Features:
- Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
- Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
- Provides outstanding low RPM torque with increased stability.
Competition Cams – XFI XE-R 232/234 Hydraulic Roller Cam (Part No.54-446-11)
from
$541.99
HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.
Product Features:
See More
Product Features:
- HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.
- 281/283 Advertised Duration, 232/234 Duration @ .050″, .595″/.598″ Lift, 112 Lobe Separation
- Use Dual Valve Spring part No. 26925-16 with this camshaft
Competition Cams – XFI RPM 216/220 Hydraulic Roller Cam (Part No.54-414-11)
from
$541.99
HYDRAULIC ROLLER – XFI RPM: Great mid-range with superior top end power. Requires tuning.
Product Features:
See More
Product Features:
- HYDRAULIC ROLLER – XFI RPM: Great mid-range with superior top end power. Requires tuning.
- 269/273 Advertised Duration, 216/220 Duration @ .050″, .525″/.532″ Lift, 114 Lobe Separation
- Use Beehive Valve Spring part No. 26915-16 with this camshaft
Chevrolet Colorado Performance and Racing Products Categories
Helping You Find the Right Performance and Racing Products for Your Chevrolet Colorado
You love your Colorado. So we’ve made it easier than ever to help you find Chevrolet Colorado Performance and Racing Products in our online catalog. Our inventory holds 90 aftermarket and OEM Performance and Racing Products for your Chevrolet Colorado, ranging from $8.99 to $1,870.00.
We offer parts from 12 brands trusted to make quality Performance and Racing Products for your Chevrolet Colorado. Before you buy, take some time to read through customer reviews. We currently have 3,054 reviews of Chevrolet Colorado Performance and Racing Products from previous customers. Some of the top rated parts include Differential Ring And Pinion with 4.2 stars and Cold Air Intake: Adds Up To 11 Horsepower, With Washable Air Filter with 5.0 stars.
Find your Colorado Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Chevrolet Colorado part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Performance and Racing Products Brands for Your Chevrolet Colorado
Our inventory holds Performance and Racing Products for your Chevrolet Colorado from 12 trusted brands. You’ll find OEM and aftermarket parts from brands like K&N, Hypertech, and B & M, all of which can keep that Chevrolet happy.
We have K&N parts available for your Chevrolet Colorado in categories like Performance Air Filters. Some of the top-rated K&N parts in these categories are:
from
$68.99
(10)
Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance
Performance Air Filters
from
$83.99
(10)
Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance
Performance Air Filters
from
$367.99
(1)
Cold Air Intake: Adds Up To 10 Horsepower, With Washable Air Filter
Engine Cold Air Intakes
Top-Rated K&N Performance and Racing Products
Leading K&N Performance and Racing Products
We carry K&N brand parts for your Chevrolet Colorado across several catalog categories, including Performance Oil Filters and Performance Air Intake Kits. Some of our most reviewed K&N parts include:
from
$17.99
(133)
Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine
Performance Oil Filters
from
$367.99
(6)
Cold Air Intake: Adds Up To 19 Horsepower, With Washable Air Filter
Engine Cold Air Intakes
from
$367.99
(5)
Cold Air Intake: Adds Up To 19 Horsepower, With Washable Air Filter
Engine Cold Air Intakes
FAQs for Chevrolet Colorado Performance and Racing Products
What are the most purchased Performance and Racing Products for the Chevrolet Colorado?
Out of 90 Performance and Racing Products for the Chevrolet Colorado, the most popular in our inventory are:
from
$239.99
This product is not rated
Speedometer Calibrator Color: Recalibrate your speedometer to account for changes to tire size
Computer Chip Programmers
from
$13.99
This product is not rated
Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine
Performance Oil Filters
What are the top-rated Chevrolet Colorado Performance and Racing Products?
Top-rated Performance and Racing Products for your Chevrolet Colorado based on customer reviews/ratings are:
from
$367.99
(5)
Cold Air Intake: Adds Up To 11 Horsepower, With Washable Air Filter
“Great addition to my chevy Colorado 2012!”
from
$367.99
(3)
Cold Air Intake: Adds Up To 9 Horsepower, With Washable Air Filter
“I just put your 63 Series Aircharger Performance Intake Kit inside my 2008 Canyon 2.9 litre standard transmission. Install is super easy. The Power i”
