Chevrolet Colorado Automotive Accessories

The Rightline Gear Truck Tent lets you experience camping in a dry truck bed, up off the ground, without the complication of tarps, stakes, and guy lines. It features a floorless design that allows you to set up or take down the tent without removing your gear from the bed. The tent is outfitted with (2) gear pockets, a lantern hanging hook, glow-in-the-dark zipper pulls, and a sky view vent. Measure the inside of your truck bed with the tailgate up and check the Truck Tent Sizing Guide. Turn any spot into a comfortable campsite!

Product Features:

• Floorless design allows for set up without removing gear from the bed
• Protective heavy duty straps and nylon buckles, won’t damage truck’s finish
• Color coded poles and pole pockets for quick and easy set up
• Water resistant fabric with tape sealed seams (PU 2000mm)
• Sky view vent for more light, ventilation, and sleeping under the stars
• All truck tents sleep (2) adults
• Includes: tent, rainfly, and stuff sack with sewn-in set up guide

Beat the elements and add some attitude to your Truck, Van or SUV. Sidewind Deflectors allow you to keep your windows partially open, to provide ventilation to the interior. Today’s modern aerodynamic body styles with form fitting doors and windows no longer feature “rain gutters” to channel away water. The result is usually water dripping into the interior. Sidewinds act like a “drip-edge” for your vehicle, this allows you to keep your window partially open for ventilation, without the rain getting in. As air flows around the outside edge of the sidewind it creates a small low pressure area underneath it (much like an airplane wing) which creates suction to keep out the wind and draw out the stale air from inside your vehicle.

Product Features:

• Securely mounts above the window on the door
• Precision engineered for a perfect fit to your vehicle
• Available in impact-resistant acrylic with a smoke finish
• Made in USA
• Car-wash safe

The Ultra truck cover offers protection against dust, debris, tree sap and other environmental pollutants. This lightweight vehicle cover is comprised of 3 layers of polypropylene. Our Ultra truck covers are fully breathable, with ultra-sonically welded seams for added durability. This cover is perfect for garage or carport stored vehicles, and can also be used for short-term outdoor storage. This soft, nonabrasive material will not harm the surface of your truck or pickup truck. The Ultra cover features a full elastic hem and built-in grommets. This auto cover is gray in color and includes a storage bag and antenna patch. Our covers are available in a variety of sizes that will popular truck makes and models.

Product Features:

• This truck cover fits trucks 210″ L x 60″ W x 56″ H
• This truck cover is made from a 3 layer, UV resistant material that will protected your vehicle’s paint from fading
• This truck cover is water resistant and features ultrasonically welded seams for extra durability
• Cover is suitable for short term outdoor protection and long-term indoor protection
• Full elastic hem to keep the cover securely on the vehicle

New Standard Replacement Front License Plate Bracket, Except Colorado With Xtreme Package

Product Features:

• Excludes Colorado With Xtreme Package, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

You can never have enough rugged storage. Whether you are storing tools, hauling game day gear, or coming up with literally hundreds of other uses- Dee Zee universal poly plastic chest is like the Swiss Army Knife of utility chests. Constructed of strong yet lightweight plastic with a double wall lid, our universal utility chest can handle all the abuse you can throw at it. We have designed our utility chest to add quick, convenient storage for all sorts of applications. Available in two sizes to suit your needs. We even provided molded drink holders in case you decide to use it on the go and get a little thirsty. Do not worry if the weather does not cooperate, a foam gasket around the lid helps defend your items against the elements.

Product Features:

• Classic Raised Brite Tread Pattern
• Rigid Frame Resists Warping
• Molded Locking Tabs
• Poly Plastic Storage Chest Rigid Plastic Frame Resists Warping
• Made In USA

KEYLESS ENTRY REMOTE

Need a new keyless remote This fob is designed to look and function exactly like your original, and you don’t need to pay for expensive programming at the car dealership. This Dorman OE FIX replacement includes a patented, DIY-friendly programming tool for simple replacement. Just plug it into the OBD II port in your dashboard, follow the included instructions, and you’re good to go. Setup takes minutes, and you can rely on your new remote for years.

Product Features:

• Vehicle-specific replacement or spare – this keyless entry transmitter looks and functions like the original fob on certain vehicle years, makes, models and configurations
• Do-it-yourself solution – includes a patented programmer that plugs into your OBD II port to setup your new fob in minutes, without expensive dealership programming
• Matches features – this 3-button remote control features lock, unlock and panic functions
• Important notes – you must have at least one of your original keys or fobs for programming process; only for use on vehicles that came originally equipped with keyless entry

Extremely powerful AM-80SX horn. Is an excellent replacement for stock AM-80SX or HK-9 disc style horns. Each horn is tested to assure maximum performance.

Product Features:

• FIAMM AM80SX LOW note two terminal Freeway Blaster features aluminum coil motor, corrosion resistant steel housing and an ABS plastic projector.
• Universal Fit
• FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
• Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications
• FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle. Proven to offer outstanding resistance to wear and tear
• 133dB @ 4″, 12V

AVS Original Ventvisor is an external mount side window deflector with an unique design that allows fresh air to circulate through open windows while keeping the weather out reducing interior heat and window fogging. Original Ventvisors come with a .

Product Features:

• Precision Engineered For A Custom Fit On Your Vehicle With Modern, Curved Design
• Easy Installation With No-Drilling Or Special Hardware Required
• Attaches Easily With 3M(TM) Automotive-Grade Adhesive Above The Window
• Made From Durable, Impact-Resistant Acrylic
• Available In Dark Smoke And Chrome Finishes

AVS Original Ventvisor is an external mount side window deflector with an unique design that allows fresh air to circulate through open windows while keeping the weather out reducing interior heat and window fogging. Original Ventvisors come with a Limited Lifetime Warranty.

Product Features:

• Precision Engineered For A Custom Fit On Your Vehicle With Modern; Curved Design
• Easy Installation With No-Drilling Or Special Hardware Required
• Attaches Easily With 3M(TM) Automotive-Grade Adhesive Above The Window
• Made From Durable; Impact-Resistant Acrylic
• Available In Dark Smoke And Chrome Finishes

All Terrain Floor Liner; Front Pair; Black; 15-17 Colorado/Canyon

Pants Saver Custom Fit 4pc Car floor Mat Set for Chevrolet COLORADO 2005 ,Gray : Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout of your Chevrolet COLORADO 2005 floor so they install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C ). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:

• Custom fit Mats for Your Vehicle No cutting required; Water Proof: Yes ; Wear Resistance: Yes.
• Unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. Pants Saver custom fit mats helps you to protect your car.
• Odorless and suitable for All Weather. Proudly Made In North America
• Superior All weather performance, Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver exact fit floor mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C )
• Box Contains 4Pcs x Car Mats. Please feel free to email us if you have any questions. We will provide the best service for you!
• Custom Fit Car Mats
• Anti Skid
• Raised Borders
• All Weather Protection
• Odorless

Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install.

Product Features:

• Saves wear and tear on your engine
• Simple installation directly into engine block

Kats Heater believes that quality is a basic requirement in the design, manufacture, and delivery of our products and services. Our quality policy is Total Customer Satisfaction in the delivery of products and services to consistently meet evolving customer expectations. We shall continuously pursue quality improvement programs that enable each employee to do his or her job right the first time and each time.

Product Features:

• Engine heater replacement cord

Dee Zee Transfer Tanks A safe and convenient means for transporting non flammable liquids. Constructed of heavy Gauge aluminum. Radius curve design eliminates key weld pressure points. Tanks feature 3 stability baffles, lockable cap, 3/8 Inch drainage plug and venting coupler. Tanks are intended for private use (non commercial).

Product Features:

• Made From Non-Rusting Brite-Tread Aluminum
• Perfect For Transporting Liquids
• Radius Curve Design Eliminates Key Welded Pressure Points
• Many Handy Styles To Fit Most Needs

The TrailFX (R) Steel liquid transfer tank is designed to be used with full size trucks. This sturdy one piece design allows you to get the greatest storage capacity. Lockable vent caps help to eliminate tampering, and heavy duty lifting loops make installation easy.

Product Features:

• Designed To Carry Diesel Non Potable Water, Or Other Non Flammable Liquids Safely
• Constructed From Heavy Duty Diamond Plate Aluminum
• Includes Lockable Cap (Must Purchase Pad Lock Separately) To Secure Transported Liquids
• Mounting Tabs Included When Necessary For Permanent Mounting (Hardware Not Included)
• Drain Plug Included To Assist With Dispersement Of Liquids
• Limited Lifetime Warranty

Cracked or wore out your key fob case- Want to add a custom look- Just replace the case with this convenient, affordable keyless entry transmitter cover, restoring or enhancing the look.

Product Features:

• Replacement or upgrade – this keyless remote case allows you to simply replace a broken case or upgrade your current look
• Seamless fit – matches dimensions of original transmitter cover for specific vehicle applications for a tight seal
• Reliable construction – keeps moisture and debris out of internal electronics for long service life
• Trustworthy quality – backed by team of product experts and engineers in the United States, and more than a century of experience

Cracked or wore out your key fob case? Want to add a custom look or differentiate between multiple keys? Simply install these silicone protective remote covers over your hard plastic OE remote case in seconds without any tools. Convenient and affordable, these keyless entry transmitter covers can be used to restore or enhance the look of your existing keyless remote, and the precision fit helps to keep moisture and debris out while protecting the fob from casual drops, scratches, and damage. Two silicone covers (one black, and one blue) are included in each package.

Product Features:

• Replacement or upgrade – this keyless remote cover allows you to simply cover a damaged plastic remote case, protect a new replacement case, or upgrade your current look
• Precision fit – matches dimensions of original keyless remote for specific vehicle applications for a clean look
• Reliable construction – keeps moisture and debris out of internal electronics to help extend service life, and protects the fob from casual drops, scratches, and damage
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyone’s needs. Step bars to grille guards, tool boxes to bed protection, whatever your need, we have you covered. TrailFX sources high quality products for trucks, SUVs, and cars at a price you can afford. Whether you need a nerf step for your SUV, a tool box for your truck, or a bug shield for your car, we want to make sure that you are supplied the quality, style, and durability you expect from a product.

Product Features:

• Designed To Be Installed On All Truck Beds
• Quickly Removed For A Clean Look When Not In Use
• Adjustable Width And Height For Customized Installation
• High Quality And Durable Powder Coated Finish
• 250 Pounds Capacity
• Easy Install And Can Be Mounted On Driver Or Passenger Side
• Drilling Is Required

TrailFX(R) Contractor Racks are designed and manufactured with both functionality and durability as a top priority. These racks are fully adjustable and will fit full-size pickup trucks with either short or long beds.

Product Features:

• Adds Convenience For Hauling Cumbersome Equipment Or Materials
• Durable Steel Cleats Are Welded To Each Upright
• Rear Cross Member Can Be Easily Removed To Accommodate Taller Items
• Black Powder Coated Finish
• No Drilling Required When Installed With Supplied J-Hooks
• Adjustable To Fit Both Long And Shortbed Models

Each Vigilante Hood Protector is precision engineered to fit your vehicle and installs easily using 3M automotive-grade adhesive. No special hardware or drilling is required! Car-wash safe, and UV and scratch-resistant, Stampede Automotive Accessories Hood Protectors are proudly made in the USA of impact-resistant acrylic in a range of finishes including smoke, chrome, American flag and genuine licensed Mossy Oak and Realtree camouflage patterns.

Product Features:

• Maximum protection to your hood to complement the look of your vehicle
• Precision engineered for a perfect fit to your vehicle
• Easy installation: no special hardware or drilling required – attaches with 3M automotive-grade adhesive
• Available in smoke, chrome, American flag and camo finishes
• UV and scratch-resistant while being car-wash safe

AVS Bugflector II is the highest-profile design providing maximum hood, fender, and windshield protection. The off-the-hood design allows for easy cleaning and waxing. Bugflector II are custom-molded, rugged, car wash safe and easy to install with no-drilling required. Comes with a Limited Lifetime Warranty.

Product Features:

• Provides Deflection To Protect Hood; Fenders; And Windshield
• High Profile; Full-Wrap Design For Trucks; SUVs; And Vans
• Off-The-Hood Design Allows For Easy Cleaning And Waxing
• Durable; Impact-Resistant Acrylic Construction
• Available In Dark Smoke Or Chrome
• Easy; No-Drill Installation

The UVS100 Sunscreen is an affordable way to protect the interior of your vehicle from damaging UV rays as well as adding a level of comfort and protection by reducing the interior temperature of the vehicle on hot days. The sunscreen is custom-fitted so that there is maximum coverage of the windshield area and ease of installation. Sometimes called heat shields, sun shields or UV shields, sunscreens are useful at the beach, work, airport or anywhere you park. This premium quality, custom patterned folding sunscreen also features a soft felt lining on the inside to help protect your interior.

Product Features:

• Custom fit to the windshield for complete coverage
• Protect the dash and other interior components from damage by the sun
• Reduce the interior temperature of the vehicle on hot days
• The foam core center of the shield acts as an insulator
• Easy to use and store away when not in use

The UVS100 Sunscreen is an affordable way to protect the interior of your vehicle from damaging UV rays as well as adding a level of comfort and protection by reducing the interior temperature of the vehicle on hot days. The sunscreen is custom-fitted so that there is maximum coverage of the windshield area and ease of installation. Sometimes called heat shields, sun shields or UV shields, sunscreens are useful at the beach, work, airport or anywhere you park. This premium quality, custom patterned folding sunscreen also features a soft felt lining on the inside to help protect your interior.

Product Features:

• Custom fit to the windshield for complete coverage
• Protect the dash and other interior components from damage by the sun
• Reduce the interior temperature of the vehicle on hot days
• The foam core center of the shield acts as an insulator
• Easy to use and store away when not in use

The UVS100 Sunscreen is an affordable way to protect the interior of your vehicle from damaging UV rays as well as adding a level of comfort and protection by reducing the interior temperature of the vehicle on hot days. The sunscreen is custom-fitted so that there is maximum coverage of the windshield area and ease of installation. Sometimes called heat shields, sun shields or UV shields, sunscreens are useful at the beach, work, airport or anywhere you park. This premium quality, custom patterned folding sunscreen also features a soft felt lining on the inside to help protect your interior.

Product Features:

• Custom fit to the windshield for complete coverage
• Protect the dash and other interior components from damage by the sun
• Reduce the interior temperature of the vehicle on hot days
• The foam core center of the shield acts as an insulator
• Easy to use and store away when not in use