Chevrolet Chevelle Performance Exhaust Products
Your One-Stop Shop For Trusted Chevrolet Chevelle Performance Exhaust Products
If you’re in search of Chevrolet Chevelle Performance Exhaust Products aftermarket or OEM parts, consider your search over! Advance Auto Parts carries 48 Performance Exhaust Products from top brands with prices ranging from $20.49 to $1,550.99.
Beyond great prices, we stock trusted brands manufacturing all types of Performance Exhaust Products for your Chevrolet Chevelle.
And don’t forget to read customer reviews across all Performance Exhaust Products categories in our catalog. Buy with confidence by leveraging past customer experiences of our aftermarket and OEM parts.
At Advance Auto Parts, we don’t think top quality Performance Exhaust Products have to cost top dollar, and we prove it. Browse our top Chevrolet Chevelle Performance Exhaust Products below, order online to ship to your home, or head into your nearest Advance Auto Parts location to get started.
Essential Chevrolet Chevelle Performance Exhaust Products
Flowmaster Inc. – 50 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Moderate Sound (Part No.842553)
from
$188.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Super 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.952548)
from
$152.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842548)
from
$139.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.8042543)
from
$135.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Pipe Kit (Part No.81068)
from
$231.99
Pipe Kit
Flowmaster Inc. – Prebent Tailpipes – 3.00 in. Rear Exit – Pair (Part No.15818)
from
$277.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More
Flowmaster Inc. – Prebent Tailpipes 409S – 2.50 in. Rear Exit – Pair (Part No.815802)
from
$322.99
Flowmaster’s pre-bent tailpipes are made with 16 gauge 409S stainless steel mandrel-bent tubing and are designed to fit your vehicle perfectly with all the quality and performance that you would expect from a Flowmaster product.
See More
Mr. Gasket – Header Bolt Set (Part No.2211G)
from
$51.99
Made of high quality stainless steel. These bolts will brighten up your hot rod, or improve the looks of your race car.
Product Features:
See More
Product Features:
- Bright Ball Burnish Finish
- Made From 304 Stainless
- Compact Hex Head Is Ideal Where Space Is Limited
- 16 per Package
- Resist corrosion and provides a clean professional appearance
Mr. Gasket – Header Bolt Set (Part No.2210G)
from
$43.49
Made of high quality stainless steel. These bolts will brighten up your hot rod, or improve the looks of your race car.
Product Features:
See More
Product Features:
- Bright Ball Burnish Finish
- Made From 304 Stainless
- Compact Hex Head Is Ideal Where Space Is Limited
- 12 Per Set
- Resist corrosion and provides a clean professional appearance
Mr. Gasket – Alternator Bracket (Part No.9850)
from
$26.99
Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- F-Style
- Heavy Gauge Steel Construction
- Fits Small Block Chevy 265-400 CID
- Must Be Used With Part 9852
Spectre – Alternator Bracket Kit 69-86 Chevy (Part No.47293)
from
$42.99
This Spectre Alternator Bracket Kit was designed for 1969-1986 Chevrolet Small Block engines with a long water pump. This triple chrome-plated kit includes two brackets and the hardware needed to mount your alternator in a clean and professional way.
Product Features:
See More
Product Features:
- Designed for ’69-’86 Chevrolet Small Block engines with long water pump
- Kit includes two brackets and mounting hardware
- Triple chrome plated
- Manufactured with high quality materials
Hooker Headers – LS1 Swap Headers for 66-72 Chevelle, El Camino, Monte Carlo & Sprint (Part No.2455-1HKR)
from
$614.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Hooker Headers – Super Comp. Header (Part No.2213-1HKR)
from
$1550.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Flowtech – High-Performance Headers with Fuel Economy and Leakproof Design (Part No.11100FLT)
from
$245.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Hooker Headers – Competition Header (Part No.2451-3HKR)
from
$819.99
Competition Header
Hooker Headers – Super Comp. Header (Part No.2116-1HKR)
from
$1230.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Flowtech – Ceramic Header (Part No.31100FLT)
from
$511.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Ceramic Headers
- Rust And Corrosion Resistance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Hooker Headers – Competition Header (Part No.2466HKR)
from
$306.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5908)
from
$54.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material.
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Anti-Stick Properties
- Easy Removal For Disassembly
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5911)
from
$44.49
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Has A Steel Core With Graphite Facing
- Graphite Facing Has Excellent Thermo-conductivity
- Can Be Trimmed If Necessary For Modified Port App
Flowtech – Real-Seal; Header Gasket (Part No.99150AFLT)
from
$95.99Product Features:
- Water/Weather Resistant
- Re-Useable
- Will Not Burn Or Blow Out
- Suitable For Port-Matching
- Made In USA
Mr. Gasket – Exhaust Gasket Set (Part No.152A)
from
$35.99
Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.
Product Features:
See More
Product Features:
- Manufactured from high-temperature acrylic blend exhaust material
- Provides excellent sealing and durability
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
Mr. Gasket – Exhaust Gasket Set (Part No.152)
from
$42.99
Mr. Gasket’s Performance Header Gaskets are manufactured from a heavy duty high-temperature material, .062 inch? thick, consisting of an acrylic binder system to resist high temperature. Provides excellent sealing and durability with maximum torque retention to eliminate gasket failure. While precision die-cut for an excellent fit, it can be trimmed if necessary for modified port applications. For OE replacement, higher performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Provides excellent sealing and durability.
- Precision die-cut for an excellent fit
- Manufactured from high-temperature acrylic blend exhaust material
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
Mr. Gasket – Copper Seal; Exhaust Gasket Set (Part No.7158)
from
$71.99
Copperseal exhaust gaskets are unique gaskets made from .043 inch solid copper. They feature an embossed O-ring design for a leak proof seal. They won’t shrink, deteriorate or blowout. Header bolts stay tight. Ideal for motor homes and towing.
Product Features:
See More
Product Features:
- Will Not Shrink/Deteriorate
- Creates A Tight Leak Proof Seal
- Helps Lower Under hood Temps
- Seals Irregular Surfaces
- Seals Slightly Damaged Surface
- Ideal For Tow Vehicles
- Ideal For Motor Homes
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5902)
from
$37.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head.
Product Features:
See More
Product Features:
- Withstands Intense Exhaust Heat
- Graphite-Impregnated Facing
- Steel Expanded Metal Core
- Superior Tensile Strength
- Resists Deteriorating
- Anti-stick Properties
- Easy Removal For Disassembly
Chevrolet Chevelle Performance Exhaust Products List
Performance Exhaust Products Brands You Can Trust For Your Chevrolet Chevelle
6 trusted brands of Performance Exhaust Products line our shelves, ready to help keep your Chevrolet Chevelle running smooth. Below are some of the most popular brands and their top Performance Exhaust Products offerings:
Popular Hooker Headers Performance Exhaust Products
Hooker Headers products for the Chevrolet Chevelle span several categories. Some of the highest-rated Hooker Headers Performance Exhaust Products that will fit your Chevrolet Chevelle are:
Top Chevrolet Chevelle Performance Exhaust Products from Flowtech
Your Chevrolet Chevelle will be purring again thanks to Flowtech brand Performance Exhaust Products available for online order or in-store pick up. Popular Flowtech parts include:
from
$245.99
(9)
High-Performance Headers with Fuel Economy and Leakproof Design
Performance Exhaust Headers
Most Purchased Chevrolet Chevelle Performance Exhaust Products from Flowtech
When you buy the most frequently purchased Flowtech brand Performance Exhaust Products, you can be confident it will be the right part for your Chevrolet Chevelle. Here are the Flowtech Performance Exhaust Products Advanced Auto customers buy the most:
from
$245.99
(9)
High-Performance Headers with Fuel Economy and Leakproof Design
Performance Exhaust Headers
from
$614.99
This product is not rated
LS1 Swap Headers for 66-72 Chevelle, El Camino, Monte Carlo & Sprint
Performance Exhaust Headers
FAQs for Chevrolet Chevelle Performance Exhaust Products
What are the most purchased Performance Exhaust Products for the Chevrolet Chevelle?
Out of 48 Performance Exhaust Products for the Chevrolet Chevelle, the most popular in our inventory are:
from
$32.49
(4)
Exhaust Gasket: High-Temperature Protection, Durability, and Reliable Sealing
Performance Exhaust Manifold Gaskets
What are the top-rated Chevrolet Chevelle Performance Exhaust Products?
Top-rated Performance Exhaust Products for your Chevrolet Chevelle based on customer reviews/ratings are:
from
$188.99
(3)
50 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Moderate Sound
“20% off from Advance plus 10% off through Discover for top-of-the-line parts – what’s not to love?”
from
$26.99
(2)
Alternator Bracket
“F bracket broke after less than 1000 miles. It snapped off one of the mouting tabs. Now I get to bust and scrape knuckles again to get it out and fin”
from
$139.99
(1)
Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound
“awesome sound!”
