1964 Chevrolet Chevelle Performance Exhaust Products
More 1964 Chevrolet Chevelle Performance Exhaust Products
Find your specific 1964 Chevrolet Chevelle original or aftermarket Performance Exhaust Products below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1964 Chevrolet Chevelle Performance Exhaust Products
Flowmaster Inc. – Prebent Tailpipes – 3.00 in. Rear Exit – Pair (Part No.15819)
from
$247.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More
Mr. Gasket – Exhaust Gaskets – Standard Duty – Small Block Chevy Square Port, 1.45"w x 1.48"h – Reusable (Part No.150C)
from
$30.99
Exhaust Gaskets – Standard Duty – Small Block Chevy Square Port, 1.45"w x 1.48"h – Reusable
Flowtech – Real-Seal; Header Gasket (Part No.99153FLT)
from
$77.99Product Features:
- Water/Weather Resistant
- Re-Useable
- Will Not Burn Or Blow Out
- Suitable For Port-Matching
- Made In USA
Mr. Gasket – Exhaust Manifold Gasket -Performance (Part No.5906)
from
$40.99
Exhaust Manifold Gasket -Performance
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)
from
$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Copper Seal; Exhaust Gasket Set (Part No.7158)
from
$57.99
Copperseal exhaust gaskets are unique gaskets made from .043 inch solid copper. They feature an embossed O-ring design for a leak proof seal. They won’t shrink, deteriorate or blowout. Header bolts stay tight. Ideal for motor homes and towing.
Product Features:
See More
Product Features:
- Will Not Shrink/Deteriorate
- Creates A Tight Leak Proof Seal
- Helps Lower Under hood Temps
- Seals Irregular Surfaces
- Seals Slightly Damaged Surface
- Ideal For Tow Vehicles
- Ideal For Motor Homes
Mr. Gasket – Side Mount Alternator Bracket (Part No.9852)
from
$22.99
Side mount header bracket. Made from heavy gauge chrome plated steel, these brackets are used to mount the alternator on small block Chevy applications.
Product Features:
See More
Product Features:
- Heavy gauge
- Chrome plated steel
Mr. Gasket – Alternator Bracket (Part No.4954)
from
$16.99
Dress up your engine. These brackets are made from heavy gauge steel, polished to a high luster, then chrome plated for lasting beauty, similar in design to OEM units, these brackets can be adapted to other engines.
Product Features:
See More
Product Features:
- Heavy gauge steel
- Polished to high luster
- Chrome plated for lasting beauty
Spectre – Alternator Bracket (Part No.4719)
from
$30.99
This Spectre Alternator Bracket is an upper mount designed to fit 1969 and later Chevrolet Big Block engines with a long water pump. Featuring a triple chrome-plated finish and high quality steel construction, this part is an OEM replacement that mounts on the passenger’s side.
Product Features:
See More
Product Features:
- Fits Big Block Chevy engines with a long water pump from 1969 and later
- Manufactured from high quality steel
- Upper bracket for passenger side mounting
- Features a triple chrome-plated finish
- Stock replacement part
Flowmaster Inc. – Header-back System – 3.00 in. Dual Rear Exit – Pipes Only No Mufflers (Part No.1040)
from
$412.99
Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More
MagnaFlow – Street Series Crossmember-Back Performance Exhaust System (Part No.15897)
from
$1083.99
The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 15897 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear Behind Rear Tires exit that you can enhance with tips of your choosing, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15897 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.
Product Features:
See More
Product Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
MagnaFlow – Street Series Crossmember-Back Performance Exhaust System (Part No.15893)
from
$1142.99
The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 15893 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Multiple Exit Options exit with 2.75in. Polished Weld-On Single Wall Turndown Cut Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15893 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.
Product Features:
See More
Product Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
MagnaFlow – Street Series Crossmember-Back Performance Exhaust System (Part No.15894)
from
$1000.00
The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 15894 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Multiple Exit Options exit with 2.75in. Polished Weld-On Single Wall Turndown Cut Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15894 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.
Product Features:
See More
Product Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.42441)
from
$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 50 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Moderate Sound (Part No.842553)
from
$174.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Hooker Headers – Competition Header (Part No.2451-3HKR)
from
$727.99
Competition Header
Hooker Headers – Competition Header (Part No.2451-1HKR)
from
$619.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Hooker Headers – Super Comp. Header (Part No.2250HKR)
from
$791.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Hooker Headers – Super Comp. Header (Part No.2250-1HKR)
from
$1132.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Hooker Headers – Super Comp. Header (Part No.2116-1HKR)
from
$1086.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Dynomax – Header (Part No.85001)
from
$132.99
Manufactured and marketed by Tenneco Inc. (NYSE: TEN), DynoMax® Performance Exhaust is a leading brand of dyno-proven exhaust products for muscle cars, pass cars, diesel and gas trucks, Jeeps and sport utility vehicles. DynoMax® products – engineered for “Pure Unadulterated Power” – include complete cat-back and axle-back performance exhaust systems; performance mufflers and the industry exclusive VT valve technology muffler; and a large assortment of accessories and related exhaust products. Each DynoMax® product has the benefits of worldwide global engineering resources. The DynoMax® brand is backed by an aggressive marketing program, including a national events program; easy-to-use website and digital and printed catalog; in-depth technical and installation information and tech line; and advertising program.Product Features:
See More
- Dynomax® Performance Exhaust, a leading performance exhaust brand built on over 20 years of market leadership. Each and every Dynomax® product is backed by engineers who know what you want and expect out of a performance exhaust product.
- Hardware and accessories provide OE-style features and design for greater durability for longer service life
- Hardware and accessories provide OE-style fit and finish for easy use and installation
- Hardware and accessories are manufactured to work seamlessly with all Dynomax® performance parts, making installation quick and easy
- Hardware and accessories are manufactured from premium steel to provide greater durability
Flowtech – Standard Header (Part No.11100FLT)
from
$227.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Hooker Headers – Super Comp. Header (Part No.2124HKR)
from
$551.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Hooker Headers – Competition Header (Part No.2451-2HKR)
from
$861.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Flowtech – Ceramic Header (Part No.31130FLT)
from
$492.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Ceramic Headers
- Rust And Corrosion Resistance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Flowtech – Standard Header (Part No.11108FLT)
from
$223.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Flowtech – Standard Header (Part No.11130FLT)
from
$258.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Flowtech – Ceramic Header (Part No.31100FLT)
from
$474.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Ceramic Headers
- Rust And Corrosion Resistance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Popular 1964 Chevrolet Chevelle Performance Exhaust Products Categories
1964 Chevrolet Chevelle Performance Exhaust Products
Maybe you’re in the middle of a full rebuild of that 1964 Chevrolet Chevelle. Maybe you just need a couple of Performance Exhaust Products. Either way, Advance Auto Parts has 27 different Performance Exhaust Products in our inventory ranging from $19.99 to $1,142.99. That means you can find the exact parts or products you need to keep that 1964 Chevrolet Chevelle running smoothly.
Performance Exhaust Products are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 1964 Chevrolet Chevelle. Mr. Gasket, Flowtech, and FEL-PRO Performance are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Exhaust Products for your 1964 Chevrolet Chevelle, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 167 reviews in this category, some of the top rated parts include Header with 4.0 stars and 50 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Moderate Sound with 3.3 stars.
So if you’re in the market for aftermarket Performance Exhaust Products to keep your 1964 Chevrolet Chevelle rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Exhaust Products Brands To Make Your 1964 Chevrolet Chevelle Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1964 Chevrolet Chevelle demands trusted brand parts and products to keep it running. Many trusted brands of Performance Exhaust Products make up Advance Auto Parts’ inventory, and all are ready to help make your Chevelle the best it can be. Be sure to browse some of our top Performance Exhaust Products brands and parts.
Popular FEL-PRO Performance Performance Exhaust Products
We carry FEL-PRO Performance parts in our stock across Performance Exhaust Manifold Gaskets categories, plus more. For a 1964 Chevrolet Chevelle, our most popular FEL-PRO Performance Performance Exhaust Products include:
Top 1964 Chevrolet Chevelle Performance Exhaust Products from Mr. Gasket
Mr. Gasket products are another trusted brand when it comes to Performance Exhaust Products for your 1964 Chevrolet Chevelle. Popular Mr. Gasket parts include:
FAQs for 1964 Chevrolet Chevelle Performance Exhaust Products
What are the most purchased Performance Exhaust Products for the 1964 Chevrolet Chevelle?
Out of 27 Performance Exhaust Products for the 1964 Chevrolet Chevelle, the most popular in our inventory are:
What are the top-rated 1964 Chevrolet Chevelle Performance Exhaust Products?
Top-rated Performance Exhaust Products for your 1964 Chevrolet Chevelle based on customer reviews/ratings are:
from
$174.99
(3)
50 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Moderate Sound
“20% off from Advance plus 10% off through Discover for top-of-the-line parts – what’s not to love?”
from
$619.99
(1)
Competition Header
“I loved the materials used and and the product. Advanced AP has gone way beyond everyone else for their customer service. Now for the issues with the ”
