Chevrolet C50 Drivetrains
Top Chevrolet C50 Drivetrains Categories
We carry over 34 Drivetrains in inventory for the Chevrolet C50. If you’re looking for aftermarket Drivetrains for your Chevrolet C50, check out all these categories:
Essential Chevrolet C50 Drivetrains
FAG US – SHAFT SEAL (Part No.SS2993)
from
$23.99
SHAFT SEAL
Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)
from
$14.49
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)
from
$35.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
FAG US – AXLE BEARING (Part No.FC67147)
from
$36.49
AXLE BEARING
Driveworks – Drive Shaft Center Support (Part No.S-HB-88508-A)
from
$29.49
Drive Shaft Center Support
National – Multi Purpose Bearing (Part No.HB-88510)
from
$116.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Drive Shaft Center Support (Part No.S-HB-88107-E)
Driveworks – Ball Bearing (Part No.S-HB-88107-A)
Driveworks – Drive Shaft Center Support (Part No.S-HB-88512-A)
Driveworks – Drive Shaft Center Support (Part No.S-HB-88508)
from
$23.49
Drive Shaft Center Support
Driveworks – Drive Shaft Center Support (Part No.S-HB-88509)
from
$31.49
Drive Shaft Center Support
FAG US – CUP (Part No.LM104911)
from
$13.29
CUP
FAG US – CONE (Part No.KLM102949)
from
$21.99
CONE
National – Bearings (Part No.88508)
from
$45.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
FAG US – HANGER BEARING (Part No.CH0158)
from
$44.49
HANGER BEARING
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)
from
$34.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 4 Lbs
- BEARING ID / BORE: 1.5750 INCH / 40 MM
- CENTERLINE: 2.48 INCH / 63 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- NOT PICTURED: TWO DUST SHIELDS
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6049)
from
$37.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 81-88; CCC 87-13; CHEV 60-90; DODGE 78-81; FORD 75-98; GMC 79-90; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1957-2018
- Weight approx: 8 Lbs
- BEARING ID / BORE: 2.3622 INCH / 60 MM
- CENTERLINE: 3.37 INCH / 86 MM
- MOUNT WIDTH: 8.62 INCH / 219 MM
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6040)
from
$17.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 81-88; CCC 87-13; CHEV 60-97; DODGE 78-81; FORD 75-98; GMC 79-97; INTL 57-02; KW 81-18; MACK 80-93; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1957-2018
- Weight approx: 4 Lbs
- BEARING ID / BORE: 1.7680 INCH / 45 MM
- CENTERLINE: 2.75 INCH / 70 MM
- MOUNT WIDTH: 7.62 INCH / 194 MM
Driveworks – Ball Bearing (Part No.S-105-CC)
National – Bearings (Part No.88107-BVV)
from
$32.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)
from
$22.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.3780 INCH / 35 MM
- CENTERLINE: 2.28 INCH / 58 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- COMPLETE MOUNT
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6027)
from
$5.29
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 87-97; GMC 67-05; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2012
- Weight approx: 1 Lbs
- CUSHION INSERT ONLY
- FOR COMPLETE MOUNT SEE PART 6056
Driveworks – Ball Bearing (Part No.S-205-FF)
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6048)
from
$46.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 81-88; CCC 87-13; CHEV 60-96; DODGE 71-81; FORD 75-98; GMC 79-96; INTL 57-02; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1957-2013
- Weight approx: 6 Lbs
- BEARING ID / BORE: 1.9685 INCH / 50 MM
- CENTERLINE: 2.80 INCH / 71 MM
- MOUNT WIDTH: 7.62 INCH / 194 MM
Spicer – Drive Shaft Center Support Bearing (Part No.210433-1X)
from
$88.99
The part you need. The name you trust. Spicer driveline components deliver top performance and value. These center bearing kits are manufactured to the same genuine standards you’ve come to expect from the most reliable name in driveshaft parts.
See More
Chevrolet C50 Drivetrains Categories
Helping You Find the Right Drivetrains for Your Chevrolet C50
You love your C50. So we’ve made it easier than ever to help you find Chevrolet C50 Drivetrains in our online catalog. Our inventory holds 34 aftermarket and OEM Drivetrains for your Chevrolet C50, ranging from $4.49 to $116.99.
We offer parts from 6 brands trusted to make quality Drivetrains for your Chevrolet C50. Before you buy, take some time to read through customer reviews. We currently have 3,268 reviews of Chevrolet C50 Drivetrains from previous customers. Some of the top rated parts include Drive Shaft Center Support with 2.5 stars.
Find your C50 Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Chevrolet C50 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Drivetrains Brands for Your Chevrolet C50
Our inventory holds Drivetrains for your Chevrolet C50 from 6 trusted brands. You’ll find OEM and aftermarket parts from brands like Valvoline, Anchor, and National, all of which can keep that Chevrolet happy.
We have Valvoline parts available for your Chevrolet C50 in categories like Differentials. Some of the top-rated Valvoline parts in these categories are:
from
$14.49
(2)
DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
Top-Rated National Drivetrains
Leading National Drivetrains
We carry National brand parts for your Chevrolet C50 across several catalog categories, including Drive Shafts and Axles. Some of our most reviewed National parts include:
FAQs for Chevrolet C50 Drivetrains
What are the most purchased Drivetrains for the Chevrolet C50?
Out of 34 Drivetrains for the Chevrolet C50, the most popular in our inventory are:
What are the top-rated Chevrolet C50 Drivetrains?
Top-rated Drivetrains for your Chevrolet C50 based on customer reviews/ratings are:
