Chevrolet C4500 Kodiak Drivetrains
Top Chevrolet C4500 Kodiak Drivetrains Categories
We carry over 141 Drivetrains in inventory for the Chevrolet C4500 Kodiak. If you’re looking for aftermarket Drivetrains for your Chevrolet C4500 Kodiak, check out all these categories:
Essential Chevrolet C4500 Kodiak Drivetrains
Driveworks – Tapered Roller Bearing (Part No.S-LM-48510)
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.330)
from
$28.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Cross forging shape and flash provide easier installation and high strength
Yukon Gear – Repleacement Ring Gear Bolt For Dana 80 (Part No.33039)
from
$7.99
Repleacement ring gear bolt for Dana 80. 9/16″ x 18.
Product Features:
See More
Product Features:
- Ring gear bolt for Dana Spicer 80
- 9/16″ x 18 thread
Yukon Gear – Set Up Bearing (Part No.56045)
from
$153.99
M802048 set-up bearing (one bearing). No return.
Product Features:
See More
Product Features:
- Set up bearing
- Fits M802048 pinion bearing
- Easily slips on and off pinion journal to allow for easier pinion depth adjustment
Yukon Gear – Differential Pinion (Part No.55076)
from
$16.99
Differential Pinion
Yukon Gear – Replacement Standard Open Carrier Case For Dana 80, 3.73 & Down (Part No.20049)
from
$529.99
Yukon replacement standard open carrier case for Dana 80, 3.73 & down, (incl ABS) 35 & 37 spline.
Product Features:
See More
Product Features:
- Standard open carrier case
- Fits Dana Spicer 80
- 3.73 and down ratio only
- Does not include spider gears
Yukon Gear – Replacement Yoke For Dana 80 With A 1410 U/Joint Size (Part No.41034)
from
$334.99
Yukon replacement yoke for Dana 80 with a 1410 U/joint size. 4.188″ snap ring span, 1.188″ cap diameter. Outside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 80
- 37 spline
- 1410 u-joint size
- 4.188″ snap ring span
- 1.188″ cap diameter
- Outside snap ring design
- Strap style
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)
from
$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil
Yukon Gear – Replacement Standard Open Spider Gear Kit For Dana S135 With 36 Spline Axles (Part No.16136)
from
$872.99
Yukon replacement standard open spider gear kit for Dana S135 with 36 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Dana Spicer S135 open differential
- Includes two side gears, two four gears, cross pin shaft and spider gear thrust washers.
Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)
from
$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 60, 70 and 80
- 3/8″
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Yukon Gear – Replacement Pinion Nut For Dana 80 (Part No.33145)
from
$26.99
Replacement pinion nut for Dana 80, 1 7/8″ socket.
Product Features:
See More
Product Features:
- Pinion nut for Dana Spicer 80
- 1 7/8″ socket
Yukon Gear – Steel Cover For Dana 80 (Part No.32323)
National – Bearings (Part No.A-5)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Motive Gear – Differential Gear Install Kit (Part No.D80IK)
USA Standard Gear – TCaseShiftForkInsert (Part No.70666)
from
$11.99
TCaseShiftForkInsert
Yukon Gear – Dana 80 Tracloc Clutch Set Round Design (Part No.16157)
from
$502.99
Dana 80 TracLoc clutch set round design (remove 4 plates 4 V-Type).
Product Features:
See More
Product Features:
- Clutch kit
- Fit Dana Spicer 80 Trac Loc positraction
USA Standard Gear – Master Overhaul Kit for the Dana 80 Differential (4.125" OD only). (Part No.37025)
from
$446.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits Dana Spicer 80 with 4.125″ O.D. pinion bearing
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, oil baffles and slingers, thread locker, marking compound with brush and silicone.
Dorman – Vacuum Actuator, Front Axle and Auxiliary Heater (Part No.600-104)
from
$48.99
This 4WD actuator valve directly replaces the original equipment valve on certain vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this 4WD actuator valve matches the fit and function of the stock valve on specific vehicle applications
- Effective fix – addresses four-wheel drive failures caused by failed original valve
- Smart solution – delivers reliable fit and function for competitive price
- Trustworthy quality – backed by team of designers and engineers in the United States
MOOG Driveline Products – Double Cardan CV H Yoke (Part No.650)
from
$61.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Machined bodies to meet the tight tolerances
- Forged and cast material to meet the performance requirement
- Minimize the flash lines for less interference
- Cleaning process induces compressive strength for increased performance
- Machined and threaded holes for mounting ease
- Rust preventative added for longer shelf life
Spicer – Differential Carrier Gear Kit (Part No.707063X)
from
$315.99
Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non genuine parts simply cannot deliver.
See More
Yukon Gear – Steel Spool For Dana 80 With 37 Spline Axles, 4.10 & Up (Part No.32173)
from
$1060.00
Yukon Performance steel spool for 8Dana 80 with 37 spline axles, 4.10 & up. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Chrysler Dana Spicer 80 with 37 spline axles
- 4.10 and up ratio only
- Provides 100% traction to both wheels at all times
- Not recommended for street driven vehicles
Yukon Gear – Replacement Outer Oil Baffle For Dana 80 (Part No.33004)
Chevrolet C4500 Kodiak Drivetrains Categories
Helping You Find the Right Drivetrains for Your Chevrolet C4500 Kodiak
You love your C4500 Kodiak. So we’ve made it easier than ever to help you find Chevrolet C4500 Kodiak Drivetrains in our online catalog. Our inventory holds 141 aftermarket and OEM Drivetrains for your Chevrolet C4500 Kodiak, ranging from $3.49 to $1,145.00.
We offer parts from 13 brands trusted to make quality Drivetrains for your Chevrolet C4500 Kodiak. Before you buy, take some time to read through customer reviews. We currently have 21,634 reviews of Chevrolet C4500 Kodiak Drivetrains from previous customers. Some of the top rated parts include Greaseable Premium Universal Joint with 4.0 stars and Greaseable Premium Universal Joint with 4.7 stars.
Find your C4500 Kodiak Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Chevrolet C4500 Kodiak part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Drivetrains Brands for Your Chevrolet C4500 Kodiak
Our inventory holds Drivetrains for your Chevrolet C4500 Kodiak from 13 trusted brands. You’ll find OEM and aftermarket parts from brands like Valvoline, Moog, and Spicer, all of which can keep that Chevrolet happy.
We have Dorman – Help parts available for your Chevrolet C4500 Kodiak in categories like Transfer Cases. Some of the top-rated Dorman – Help parts in these categories are:
Top-Rated Valvoline Drivetrains
Leading Valvoline Drivetrains
We carry Valvoline brand parts for your Chevrolet C4500 Kodiak across several catalog categories, including Differentials. Some of our most reviewed Valvoline parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for Chevrolet C4500 Kodiak Drivetrains
What are the most purchased Drivetrains for the Chevrolet C4500 Kodiak?
Out of 141 Drivetrains for the Chevrolet C4500 Kodiak, the most popular in our inventory are:
What are the top-rated Chevrolet C4500 Kodiak Drivetrains?
Top-rated Drivetrains for your Chevrolet C4500 Kodiak based on customer reviews/ratings are:
from
$41.99
(12)
Non-Greaseable Super Strength Universal Joint
“Fits and works like it’s supposed to.”
