Chevrolet C10 Ignition Coils and Boots

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Designed to meet or exceed OE specifications in form, fit and function
• Attaching hardware provided (where applicable)

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

• Custom Fit For Make And Model Listed
• Wires Are Pre-Cut To Exact Specifications
• Bolt-on Performance

The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:

• 500 Ohms/ft Of Resistance
• 550 F Rated Silicone Jacket
• Stainless Steel Plug Terminals
• High RFI Suppression For Street And Strip Use
• High-strength Fiberglass Braid Construction
• 8mm High Gloss Silicone Jacket
• 500 Ohms Resistance

The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:

• 500 Ohms/ft Of Resistance
• 550 F Rated Silicone Jacket
• Stainless Steel Plug Terminals
• High RFI Suppression For Street And Strip Use
• Universal And Import Coverage
• High-strength Fiberglass Braid Construction
• Pre And Post HEI Vehicles
• 8mm High Gloss Silicone Jacket

These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.

Product Features:

• 7mm And 8mm High Gloss Silicone Jacket
• 450° F Rated Silicone Jacket
• Stainless Steel Plug Terminals
• RFI Suppression For Street Driven Applications
• Custom-fit Universal And Import Coverage
• High-strength Fiberglass Braid Construction

ACCEL now offers the cure for burnt spark plug boots with Extreme 9000 ceramic wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerance, an engine bay with little room, or an RV with boots that melt because of heat. Ultra high temperature double silicone construction wire rated at 600 degrees Fahrenheit peak. 500 ohms/ft Ferro-Spiral core developed for performance use. Excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. Stainless steel spark plug terminals for maximum spark energy to the plugs. Pre-made to factory lengths for a perfect fit.

Product Features:

• Ceramic boots withstand up to 2,000░ Fahrenheit
• Ceramic boots withstand up to 2,000° Fahrenheit
• 8mm double silicone construction black wire rated at 600░ F rated
• 8mm double silicone construction black wire rated at 600° F rated
• 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
• Universal and custom fit applications
• Universal And Custom Fit Applications

ACCEL now offers the cure for burnt spark plug boots with Extreme 9000 ceramic wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerance, an engine bay with little room, or an RV with boots that melt because of heat. Ultra high temperature double silicone construction wire rated at 600 degrees Fahrenheit peak. 500 ohms/ft Ferro-Spiral core developed for performance use. Excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. Stainless steel spark plug terminals for maximum spark energy to the plugs. Pre-made to factory lengths for a perfect fit.

Product Features:

• Ceramic boots withstand up to 2,000░ Fahrenheit
• Ceramic boots withstand up to 2,000° Fahrenheit
• 8mm double silicone construction black wire rated at 600░ F rated
• 8mm double silicone construction black wire rated at 600° F rated
• 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
• Universal and custom fit applications
• Universal And Custom Fit Applications

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

• Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
• Identical OE end caps are designed to “click” into place for easy installation and a secure fit
• Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

• Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
• Identical OE end caps are designed to “click” into place for easy installation and a secure fit
• Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

• Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
• Identical OE end caps are designed to “click” into place for easy installation and a secure fit
• Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

Product Features:

• Replacement Coil For GM Dual Connector Coil
• Improved Turns Ratio
• Lower Primary Resistance
• Bolt-In replacement coil
• Produce More Output Voltage
• Smooth Idle

Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

• Direct-fit OE replacement ensures ease of installation
• Designed to meet OE performance
• As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
• As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

BWD SELECT® replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:

• Manufactured using high-quality materials to provide superior durability and long service life
• Designed and engineered to ensure precise performance
• The BWD SELECT® HEI/DIS ignition coils have solid brass high voltage terminals. The benefit is better connections and greater corrosion resistance.
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Built by IATF 16949 certified manufacturers for consistent durability
• Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
• Segmented secondary bobbins to distribute high voltage and prevent shorting
• Extensive design validation testing to ensure long-lasting reliability
• 100% end-of-line tested to ensure proper performance
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

HEI owners now have a choice to replace their stock coil with the MSD high energy unitized coil for GM HEI distributors. This coil is a direct replacement of the stock coil and offers increased spark energy when used with the MSD HEI module, PN 83645. The coil features special low induc?tance, high temperature windings which charge faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.

Product Features:

• Direct performance replacement for GM HEI coil-in-cap dist.
• 70:1 Turns Ratio
• Lower Primary Resistance Produces High Voltage Output
• Full Power Sparks To 9000 Rpm w/PN[83647] MSD HEI Module

Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:

• Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
• Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
• Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
• We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
• Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure confidence and product reliability, every time.

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function