Chevrolet Brookwood Parts

Chevrolet Brookwood Body Parts

from

$10.99

Replacement Glass for 71-76 Centurion; 73-79 Century71-90 LeSabre; 73-87 Regal; 70-85 Skylark; 77 Special; 60-82; 71-76 Brookwood Wagon; 70-81 Camaro; 71-90 Caprice; 71-90 Caprice; 71-79 Concourse; 73-87 El Camino; 71-76 Impala; 73-77; 73-88 Monte Carlo;

Product Features:

The glass measures 3 1/2″ inches tall by 5″ inches wide and 5 3/16″ inches diagonally.
Glass fits mirrors with power functions only.
Step-by-step instructions for easy installation
Mounting tape included for low-hassle stick-on installation
Most economical way to replace cracked mirror glass versus the entire mirror housing
Flat

from

$8.49

This door hinge pin & bushing kit is designed to match the original parts required to restore door alignment and function on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles
Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$16.99

This Ameriseal 72″ Flexible Flocked Lining All-Rubber Window Glass Run Channel 72″ Length For Application- 1965-1975 GM Mid size car is the ideal solution for all your car leakage problems. This window glass run channel is perfectly compatible with the 1979-1993 Ford Mustang Coupe model. It features a strong adhesive to keep your car completely protected from dust and water. It is an ideal solution for your old or worn-out counterpart.

Product Features:

Flexible model
Easy installation allows for user-friendly operability
Durably designed for longevity
Allows you to keep dust and water away from your car
Highly dense rubber body built

from

$9.79

Worn or broken window crank handle leading to difficult window operation? Made of durable material for reliable performance, this window crank handle replaces the original equipment handle.

Product Features:

Ideal replacement – this window crank handle matches the fit and function of the original equipment component
Durable construction – this window crank handle is made of durable material to withstand extended use
Easy to install – this window crank requires no special tools to install
Versatile design – this window crank handle is suitable for use in various locations in the vehicle

from

$4.49

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Bumper. Made with twin retainers. 1-1/8 In. high X 9/16 In. wide X 1 In. long. Each.

Product Features:

Jet black to match the color of the original part
Dense rubber to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$8.79

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Fuel Door Bumper. 7/8 In. high, 5/16 In. O.D. Each.

Product Features:

Jet black to match the color of the original part
Dense rubber to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$110.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Molded Door Seals. For 4-door wagon only, with RWD. Each. is 127-1/2 In. long. Pair. R&L.

Product Features:

Jet black to match the color of the original part
There’s no need to slam when you use Metro SUPERsoft weatherstripping products
Exact fit
High quality original equipment replacement part
Made in the USA

from

$21.99

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$24.99

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles.
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$13.99

This door lock striker is designed to match the fit and function of the original striker on specified vehicles, and is engineered for durability & reliable performance.

Product Features:

Direct replacement – this door lock striker is designed to match the fit and function of the original striker on specified vehicles.
Restores functionality – reliable replacement for an original part that has failed due to collision damage or fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$11.99

This door lock striker is designed to match the fit and function of the original striker on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this door lock striker is designed to match the fit and function of the original striker on specified vehicles.
Restores functionality – reliable replacement for an original part that has failed due to collision damage or fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.49

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Rear Windshield Reveal Molding Clip. Made of steel. 15/16 In. X 3/4 In. Each.

Product Features:

Jet black to match the color of the original part
Dense material to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$102.99

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:

Assures Longer Lasting Cab to Bed Alignment
Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$96.99

Assures Longer Lasting Cab to Bed Alignment
Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$7.99

This door hinge bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$1.79

This door hinge bushing is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$16.29

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Seat Bumper. Made with steel core like original. 1-1/2 In. long, 7/16 In. thick. Two used per car. Each.

Product Features:

Jet black to match the color of the original part
Dense material to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$7.99

This door lock rod clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this door lock rod clip matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Chevrolet Brookwood Transmission Parts

from

$6.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$7.99

AT SEL SHAFT SEAL

from

$6.29

AT SEAL

from

$84.99

These universal fit adjustable cables will work in 95 percent of all listed transmission applications, yet are less expensive than OE models. Use as straight replacement cable or ease the installation of transmission swaps.

Product Features:

Universal Fit Adjustable
Less Expensive Than OE Models
Ease Trans. Swap Installation

from

$2.49

Product Features:

Brand may vary by location

from

$16.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$108.99

What better way to check you oil level by using one of B&M’s transmission fluid dipsticks? The cap screws into the tube and is O-ring sealed, while the base of the tube has a sealing grommet where it goes into the transmission.

Product Features:

Automatic Transmission Dip Stick

from

$11.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Available in both caged design and full complement
Industry leading coverage
Professional technicians know they can depend on National

from

$460.99

Converter: Th350 24-2800 Stall

from

$7.99

AT EXT HOUSING SEAL

from

$14.99

AT OIL PUMP SEAL

from

$62.99

The B&M Shift Improver Kit the easiest way to get the performance you’ve always wanted out of your automatic transmission, two modes to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit.

Product Features:

Provides Crisp Shifts
On Any Stock Automatic Transmission
Eliminates Soft/Sluggish Shift
Eliminates Shift Overlap
Eliminate Clutch and Band Wear
Improves Transmission Life
Transmission Removal Not Required

from

$27.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$16.49

TAPERED ROLLER BEARI

from

$5.99

AT SPEED PINION SEAL

from

$7.99

This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$10.99

AT FRT PUMP BUSHING

from

$8.99

AT CLUTCH PLATE

from

$6.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$8.29

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$3.49

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$3.29

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

Chevrolet Brookwood Clutch Systems

from

$20.99

This clutch pivot ball is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this clutch pivot ball is designed to match the fit and function of the original part on specified vehicles.
Ideal solution – this pivot ball is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$689.99

Trans Adapter-Chevrolet

from

$10.49

This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$11.29

Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$5.99

Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$8.29

Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$23.99

CLUTCH FORK

from

$66.99

Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:

For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.

from

$25.99

For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.

from

$6.99

AT CLUTCH PLATE

from

$13.99

AT CLUTCH PLATE

from

$20.99

The importance of pressure plate bolts in a racing or Hi-Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.

Product Features:

High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 PSI
Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
Large Diameter, Low Profile Design
Complete With Washers
Sold As A Kit
180,000 PSI

from

$443.99

Hays450 Cltch 70-84 GM V8:10.5In:26Spl

from

$195.99

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$154.99

As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1955-85 GM small block (internally balanced) V8 engines along with 4.3L V6 engines. Also fits 1990 and earlier GM big block (internally balanced) V8 engines with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.

Product Features:

NHRA/IHRA Legal For All Classes
Includes SFI Certification Sticker
Ideal For Street Applications
To Extreme Duty Racing
To High RPM Use

from

$60.99

AT HD FLEX PLATE

from

$44.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Design improvements include extended life and quiet operation
Industry leading coverage
Professional technicians know they can depend on National

from

$90.99

Power Train

from

$58.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Design improvements include extended life and quiet operation
Industry leading coverage
Professional technicians know they can depend on National

from

$29.99

The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

Manufactured to meet or exceed original equipment specs
Eliminates grinding from damaged teeth
Increases starter drive life

from

$26.99

FLYWHEEL SHIM

from

$27.99

ATP Flywheel Shim

from

$26.99

FLYWHEEL SHIM

Chevrolet Brookwood Automotive Accessories

from

$322.99

Covercraft’s custom fit Polycotton Car Cover provides good basic indoor protection for your vehicle. A good choice for a budget conscience shopper looking for basic coverage and protection. Constructed from drill weave Polycotton blend materials. Fabric is soft and durable to protect your paint finish. Polyester material is sun and water resistant. Comes in gray.

Product Features:

Good basic indoor protection
Drill weave Polycotton blend
Resists tears and punctures
Treated to resist rot and mildew

from

$832.99

Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab.

Product Features:

Best for intense sun locations
Durable long-lasting fabric
Solution dyed woven acrylic fabric
Provides almost complete UV blockage

from

$832.99

Best for intense sun locations
Durable long-lasting fabric
Solution dyed woven acrylic fabric
Provides almost complete UV blockage

from

$832.99

Best for intense sun locations
Durable long-lasting fabric
Solution dyed woven acrylic fabric
Provides almost complete UV blockage

from

$851.99

As the most heavy duty car covers on the market, the WeatherShield HD car cover is built to handle the most intense weather and climates. Toughest of the tough, the WeatherShield HD car covers are constructed from 40% heavier fabric and stronger thread providing double the tear strength, double the tensile strength. Proprietary processes place a specially formulated finish inside the fabric, bonding each individual thread so there is virtually no space between them for water or dirt or pollutants to enter. The WeatherShield HD may not be as silky-smooth as other car covers, but it will out perform them in harsh climates! Designed as a long-term storage solution.

Product Features:

The most heavy-duty car cover on the market
Specially treated to resist fading and color transfer
Sheds water and blocks out dust
Outsmart the outdoors!

from

$832.99

Best for intense sun locations
Durable long-lasting fabric
Solution dyed woven acrylic fabric
Provides almost complete UV blockage

from

$744.99

Best for intense sun locations
Durable long-lasting fabric
Solution dyed woven acrylic fabric
Provides almost complete UV blockage

from

$832.99

Best for intense sun locations
Durable long-lasting fabric
Solution dyed woven acrylic fabric
Provides almost complete UV blockage

from

$13.29

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Sun Visor Rod Rubber Grommet. 3/4 In. long. Gray. Each.

Product Features:

Jet black to match the color of the original part
Dense rubber to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$81.99

Circulation Tank Heater is Available in 850W, 1000W, 1500W, and 2000W, 120V and 240V. This heater is thermostatically controlled 135 degrees-175 degrees. Moderate mechanical ability is required for installation. Uses versatile strap type mounting.

Product Features:

Available for all size engines
Equipped with check valve
Fits most liquid cooled engines
Installations easier and simpler
New lower radiator hose connectors

from

$38.99

Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install.

Product Features:

Saves wear and tear on your engine
Simple installation directly into engine block

from

$36.99

Saves wear and tear on your engine
Simple installation directly into engine block

from

$75.99

KATS was created and developed as a truly effective product for cold weather and hard starting problems. Owners and operators of diesel and gas operated equipment have long known that delayed starts and slow starts mean big money losses in labor, maintenance and operating revenue. KATS Circulation Tank Heaters are designed to do one thing – Start engines FAST! KATS Circulation Tank Heaters are truly superior heavy duty patented products. This heater is thermostatically controlled 135-175 degrees. Our components are 100% made in the USA. Customers will find KATS Circulation Tank Heaters are unbeatable in pricing, quality and performance anywhere. KAT’S manufacturing quality control procedures assure you the very best anytime you install and operate a KAT’s system.

Product Features:

Available for all size engines
Equipped with check valve
Fits most liquid cooled engines
Installations easier and simpler
New lower radiator hose connectors

from

$30.99

Block heaters help to increase oil viscosity in cold weather in 2 to 5 hours. They also improve lubrication of engine parts and protect the engine from cold weather starts. The heaters decrease the amount of hydrocarbons put into the atmosphere when a vehicle is started in cold weather.

from

$35.99

Saves wear and tear on your engine
Simple installation directly into engine block

from

$40.99

from

$56.99

Product Features:

All lower radiator hose heaters are thermostatically controlled and include 2 hose clamps for easy installation
600 watt lower radiator hose heater for a 1-3’4″ lower hose

from

$56.99

Lower Radiator Hose Heater

Chevrolet Brookwood Interior Products

from

$13.49

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$16.05

Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$11.99

ATP Speedometer Cable Core Kit provides a lower cost alternative to cable repair when the cable core has broken or kinked. Each kit includes 0.130″ diameter S.A.E./O.E.M. standard multi-coiled wire cable with squared end, universal metal tip and spacer washer. Cut cable end to desired length and attach tip using staking tool (included). The overall length of the cable core is 83″.

Product Features:

Easy to install
Will fit many custom applications
Low cost alternative

from

$12.99

Easy to install
Will fit many custom applications
Low cost alternative

from

$34.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Brake Pedal Pad. For power brakes or automatic transmissions. 4-3/4 In. wide X 2-3/4 Ft. long. Each.

Product Features:

Jet black to match the color of the original part
Dense rubber to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$31.49

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

CarQuest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$10.79

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Dash and Firewall Grommet. Two hole type. Each.

Product Features:

Jet black to match the color of the original part
Dense rubber to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$11.79

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Dash and Firewall Grommet. Single-hole type is for one wire. Each.

Product Features:

Jet black to match the color of the original part
Dense rubber to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$11.99

Speedometer cables connect the speedometer to the transmission. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Speedometer cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

Includes Cable Lube
Plastic sheath protects cable from debris and water
Comes ready to install

from

$17.99

Includes Cable Lube
Plastic sheath protects cable from debris and water
Comes ready to install

from

$30.99

SPEEDO GEAR

from

$8.99

Pedal cover worn out or missing? This brake pedal pad is a direct replacement for a cracked, worn or missing pad, restoring a safe gripping surface to the brake pedal for safety and comfort.

Product Features:

Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
Durable materials – this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver’s shoe
Easy installation – this pad slides onto the brake pedal and requires no special tools or hardware
Quality tested – this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle’s application

from

$9.29

This turn signal cam is designed to match the fit and function of the original cam on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this turn signal cam is designed to match the fit and function of the original cam on specified vehicles.
Restores functionality – reliable replacement for an original part that has failed due to wear or collision damage
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$13.49

This turn signal cam is designed to match the fit and function of the original cam on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this turn signal cam is designed to match the fit and function of the original cam on specified vehicles.
Restores functionality – reliable replacement for an original part that has failed due to wear or collision damage
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$65.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Accelerator Pedal Pad with flange, made of rubber with steel core. Also features nylon rub plate on back side. Double hole, snap-on type. 3 In. X 11 In. Each.

Product Features:

Jet black to match the color of the original part
Dense material to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$54.99

Standard Installation Kit. This is the standard Grant Steering Wheel Installation Kit. These kits may be used to install all Classic Series, Challenger Series or Signature Series Steering Wheels. Each kit contains complete step-by-step instructions, a die cast hub, grade 5 hardware and matte black trim pieces.

Product Features:

Use To Install All Classic, Challenger Or Signature Series Wheels
Each Kit Contains Complete Step-By-Step Instructions, A Die Cast Hub, Grade 5 Hardware And Matte Black Trim Pieces
ISO/ TS Certified
Designed To Mount Our Wheel To Your Rig
Use with all Grant Classic/Challenger/Signature Steering Wheels

from

$54.99

Use To Install All Classic, Challenger Or Signature Series Wheels
Each Kit Contains Complete Step-By-Step Instructions, A Die Cast Hub, Grade 5 Hardware And Matte Black Trim Pieces
ISO/ TS Certified
Designed To Mount Our Wheel To Your Rig
Use with all Grant Classic/Challenger/Signature Steering Wheels

from

$129.99

Optional Billet Style Installation Kits. Grant Billet Style Installation Kits are an optional styling upgrade. The Billet Style Kits have Grant five-hole mounting pattern and can only be used to install Grant Signature Series Steering Wheels.

Product Features:

Highly Polished With A Black Luster Finish
Use To Install Grant Signature Series 5 Bolt Steering Wheels
ISO/ TS Certified
Designed To Mount Our Wheel To Your Rig

from

$129.99

Highly Polished
Use To Install Grant Signature Series 5 Bolt Steering Wheels
ISO/ TS Certified
Designed To Mount Our Wheel To Your Rig

Looking for the best Chevrolet Brookwood aftermarket replacement parts? Replacing worn and broken parts on your Chevrolet Brookwood? Check out our online catalog to find the best selection of aftermarket Chevrolet Brookwood parts as well as real user reviews on Chevrolet Brookwood replacement parts. Make an informed decision about every component you add to your Brookwood.

At Advance Auto, we’ve got you covered when it comes to getting your Chevrolet Brookwood in tip top condition. We’ve got over 3,022 Chevrolet Brookwood parts to choose from in popular categories like Body Parts, Transmission Parts and Clutch Systems. If you’re looking for the best prices, try searching our Chevrolet Brookwood parts catalog to compare OEM and aftermarket parts for your Chevrolet Brookwood.

Whether you need Chevrolet Brookwood body parts, interior components, or custom Chevrolet Brookwood parts you can find them online at Advance Auto. Want to order your Automotive Accessories online? Or maybe you need your Chevrolet Interior Products same day? No problem, you can pick up Brookwood parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Chevrolet Brookwood parts has never been easier.

Advance Auto customers frequently search for the following types of Chevrolet Brookwood auto parts. Check out customer reviews and ratings, and compare prices on the following Chevrolet Brookwood parts:

People also search Advance Auto for these popular years of the Chevrolet Brookwood:

Chevrolet Brookwood Parts

K-Source – Replacement Glass (Part No.99143)

Dorman – Help – Door Hinge Pin And Bushing Kit – 1 Pins And 4 Bushings (Part No.38400)

AmeriSeal – Flexible Flocked Lining All-Rubber Window Glass Run Channel 72" Length (Part No.10868)

AutoCraft – Window Handle (Part No.76910)

Metro Mould – Door Stop (Part No.SB 35)

Metro Mould – Fuel Door Rubber Stop (Part No.SB 81)

Metro Mould – Door Seal (Part No.LM 16-G/W)

AutoCraft – Exterior Door Handle (Part No.77019)

Dorman – Help – Exterior Door Handle Front left (Part No.88350)

Needa Parts – Door Striker Bolt, 1/2-13 In. (Part No.38420)

Dorman – Help – Door Striker Bolt Kit – 7/16 In.-14 (Part No.38428)

Metro Mould – Moulding Clip (Part No.WF 211)

Energy Suspension – Body Cab Mount Set (Part No.3.4108G)

Energy Suspension – Body Cab Mount Set (Part No.3.4108R)

Dorman – Help – Door Hinge Bushing Assortment – 4 Sizes (Part No.38374)

Needa Parts – Door Hinge Bushings, .345 In. Id X .420 In. Od X .305 In. Height (Part No.38375)

Metro Mould – Seat Frame Retainer (Part No.SB 62-A)

Dorman – Help – Door Lock Rod Clips (Part No.75455)

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

ATP – AT SEL SHAFT SEAL (Part No.SO-19)

ATP – AT SEAL (Part No.SO-39)

B & M – Kickdown Cable For TH-350 Transmission (Part No.30287)

Driveworks – Auto Transmission Shift Shaft Seal (Part No.S-8792S)

National – Multi Purpose Seal (Part No.5208)

B & M – Aluminum Braided Dip Stick, Fits TH-400 Transmission (Part No.22166)

National – Bearings (Part No.FA-35688)

Hays – Converter: Th350 24-2800 Stall (Part No.97-1B24Q)

ATP – AT EXT HOUSING SEAL (Part No.SO-22)

ATP – AT OIL PUMP SEAL (Part No.CO-4)

B & M – Shift Improver Kit For 65-87 TH400 Transmission (Part No.20260)

Felpro – Manual Transmission Gasket Set (Part No.TS 5135)

FAG US – TAPERED ROLLER BEARI (Part No.KT3)

ATP – AT SPEED PINION SEAL (Part No.SO-34)

Dorman – Clutch Pilot Bushing (Part No.690-014.1)

ATP – AT FRT PUMP BUSHING (Part No.CB-4)

ATP – AT CLUTCH PLATE (Part No.JC-50)

National – Multi Purpose Seal (Part No.8792S)

Driveworks – Oil Seal (Part No.S-8611N)

Motive Gear – Differential Pinion Seal (Part No.2043)

National – Multi Purpose Seal (Part No.240698)

Dorman – Help – Ball Stud Thread Size 13/16-16, Length 1.50 In. (Part No.14556)

Lakewood – Trans Adapter-Chevrolet (Part No.77-150)

Dorman – Help – Flywheel Bolts (Part No.14557)

Dorman – Help – Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In (Part No.74070)

Dorman – Clutch Pilot Bushing .593 In. x 1.09 In. Type A, Length .750 In. (Sold by each) (Part No.690-014)

Dorman – Help – Clutch Pilot Bushing (Part No.14650)

ATP – CLUTCH FORK (Part No.ZA-100)

Richmond Gear – Differential Cross Shaft (Part No.80-0272-1)

Richmond Gear – Differential Cross Shaft (Part No.CSPGM82)

ATP – AT CLUTCH PLATE (Part No.SC-30)

ATP – AT CLUTCH PLATE (Part No.SC-29)

ARP Auto Racing – 3/8" – 16 Thread Size, 180000 Psi Tensile Strength, Hex Style Head Type (Part No.130-2201)

Hays – Hays450 Cltch 70-84 GM V8:10.5In:26Spl (Part No.91-1003)

LuK – Clutch Kit: 10" Disc Diameter, 1 1/8" Input Shaft Diameter, 10 Tooth Spline (Part No.04-003)

B & M – Flexplate, SFI 29.1 Approved, Fits 168-Tooth, 2-Piece Rear Main Seal, Chevy V8 (Part No.20230)

ATP – AT HD FLEX PLATE (Part No.Z-460)

National – Multi Purpose Bearing (Part No.614018)

Hays – Power Train (Part No.70-101)

National – Multi Purpose Bearing (Part No.614037)

ATP – Flywheel Ring Gear (Part No.ZA-500)

ATP – FLYWHEEL SHIM (Part No.GS-4)

ATP – ATP Flywheel Shim (Part No.GS-8)

ATP – FLYWHEEL SHIM (Part No.GS-10)

Covercraft – Custom Fit Car Covers Polycotton Gray (Part No.C112PD)

Covercraft – Custom Fit Car Covers Sunbrella Gray (Part No.C783D4)

Covercraft – Custom Fit Car Covers Sunbrella Toast (Part No.C112D6)

Covercraft – Custom Fit Car Covers Sunbrella Toast (Part No.C783D6)

Covercraft – Custom Fit Car Covers WeatherShield HD Gray (Part No.C783HG)

Covercraft – Custom Fit Car Covers Sunbrella Pacific Blue (Part No.C783D1)

Covercraft – Custom Fit Car Covers Sunbrella Pacific Blue (Part No.C2033D1)

Covercraft – Custom Fit Car Covers Sunbrella Toast (Part No.C10487D6)

Metro Mould – Sun Visor (Part No.RP 303-C)

Kat’s – Circulation Tank Heater; Thermostatically Controlled (Part No.13100)

Kat’s – Freeze Plug Heater (Part No.11612)

Kat’s – Freeze Plug Heater (Part No.11610)

Kat’s – Circulation Tank Heater; Thermostatically Controlled (Part No.13150)

Zerostart – Engine Heater, 600W 120V, 1 5/8 Inch Plug (Part No.3100054)

Kat’s – Freeze Plug Heater (Part No.11607)

Zerostart – Engine Heater, 600W 120V, 1 5/8 Inch Plug, GM , Ford, Jeep, Continental (Part No.3100057)