Name: Tire Pressure Monitoring System (TPMS) Sensor
Brand: ACDelco
SKU: 15136883
Price: 90.99 USD

from

$90.99

ACDelco GM Original Equipment Tire Pressure Monitoring Sensors (TPMS) are battery powered sensors located in the tire that monitor the vehicle’s tire pressure and warn the driver when pressure falls more than 25% below the manufacturer’s recommendations (normally through a slow pressure loss), and are GM-recommended replacements for your vehicle’s original components. The sensor is connected with the valve stem and, by way of Radio Frequency (RF) technology, sends pressure updates to the vehicle’s on-board computer. Tire pressure is displayed on the vehicle’s Driver Information Center (DIC) or, when low, a warning light may be illuminated to warn the driver. U.S. Federal Regulations require that new cars and light trucks be equipped with TPMS starting in 2008. These original equipment tire pressure monitoring sensors have bn manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Battery is made to last up to 10 years of normal use
Designed to communicate perfectly with your GM vehicle’s TPMS Module
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$16.79

Product Features:

Brand may vary by location

from

$231.99

Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
CORROSION PROTECTION — Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
DAMAGE RESISTANCE — Abrasion-resistant ABS cord resists damage, contamination and vibration that may lead to premature wear

from

$2.49

This wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance. Made of quality materials for durability, this cover has been dimensionally validated for specific applications.

Product Features:

Correct fit – this wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance
Quality materials – manufactured for durability and a quality finish
Simple installation – no special tools required
Quality tested – this part has undergone dimensional testing to ensure a quality fit

from

$1.99

Parts Kit For Gm

from

$9.49

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$40.49

Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:

Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$8.79

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Available in both caged design and full complement
Industry leading coverage
Professional technicians know they can depend on National

from

$44.99

Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. SplineDrive lug nuts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. SplineDrive lug nuts take safety, dependability and style to the next level.

Product Features:

Guaranteed for life not to rust, chip, or peel.
Every McGard SplineDrive lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
For aluminum wheels only.
Requires 65301 or 65302 Installation Tool sold separately.

from

$3.49

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:

Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$27.49

Protect the braking system from debris and corrosive weather conditions with this rust-resistant replacement brake dust shield. Dimensional verification and salt spray testing ensures proper fit and extended service life.

Product Features:

Effective replacement – designed to match the fit and function of the stock brake dust shield on specific vehicle applications
Longer service life – corrosion-resistant steel construction protects brakes from elements and debris
Ideal fix – directly replaces highly deterioration-prone original part
Precision-engineered – has undergone dimensional verification and salt spray testing to ensure quality

from

$3.49

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:

Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$47.99

BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.

Product Features:

315 MHz TPMS Universal with metal valve
Programmable – Only take 3 seconds to configure to specific application
Always up-to-date with the new programming function via the TPMS diagnostic tool
Covers multiple applications with one OE equivalent sensor
Reprogrammable and Copy Clone Capable
Have WAL technology for locating tire positon
Supported by Bartec, ATEQ, Snap On, NAPA, Matco and Corghi TPMS Diagnostic tools
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$494.99

The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.

Product Features:

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
For aluminum wheels only.
Set of 28 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key, & Key Storage Pouch

from

$45.99

This wheel cap is designed to match the fit, appearance and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this wheel cap is designed to match the fit, appearance and function of the original cap on specified vehicles
Restores functionality – reliable replacement for an original cap that is missing or damaged due to collision
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$68.99

Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.

Product Features:

MX-Sensor Components
4 Metal Valves
4 Rubber Valves
Rubber Gasket (2×10 pcs)
Screw Nut (2×10 pcs)
Washer (2×10 pcs)
Metal Valve Cap (2X10 pcs)
Rubber Valve Cap (2X10 pcs)
Valve Core (2X10 pcs)

from

$49.99

Outer wheel bearing retaining snap ring for GM 14T.

Product Features:

Outer wheel bearing retaining snap ring
Fits GM 10.5″ 14 bolt truck

from

$4.29

This wheel bearing dust cap is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this wheel bearing dust cap is designed to match the fit and function of the original part on specified vehicles
Ideal solution – this dust cap is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$12.99

This wheel bearing dust cap is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this wheel bearing dust cap is designed to match the fit and function of the original part on specified vehicles
Ideal solution – this dust cap is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$7.79

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$16.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$402.12

An ACDelco GM Original Equipment Wheel Hub provides the attaching point for the brake rotor and road wheel. The wheel hub is supported and allowed to rotate by the wheel bearing. This original equipment wheel hub is engineered to fit your specific GM vehicle and will provide the same performance, durability, and service life you expect from General Motors Get the GM quality you know and trust with ACDelco GM Original Equipment Bearings and Oil Seals. Stay with the brand of parts your vehicle came with and get peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. ACDelco GM Original Equipment Bearings and Oil Seals are engineered for virtually every make and model of GM car, light duty truck, and sport utility vehicle. ACDelco offers a variety of bearings and seals for your GM vehicle, such as wheel hub bearings, generator/alternator bearings, front and rear wheel seals, rear axle seals, etc. When smooth, efficient performance is critical, choose ACDelco.

Product Features:

High quality materials ensure long service life
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function