Cadillac XLR Fuel and Emissions Systems

Essential Cadillac XLR Fuel and Emissions Systems

Dorman – Pigtail -Evap. Canister Vent Valve Solenoid , Red, 2-way with Leads (Part No.645-631)

Pigtail -Evap. Canister Vent Valve Solenoid , Red, 2-way with Leads

from

$37.99
Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:
  • Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
  • Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
  • Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
  • Versatile component – this connector can be used in a variety of repairs and custom installations
See More

Carquest Premium – Vapor Canister (Part No.CPN1145)

Vapor Canister

from

$151.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ACDelco – Fuel Pump Relay (Part No.P2037620205ACD)

Fuel Pump Relay

from

$36.27
Fuel Pump Relay

Carquest – Multi Purpose Relay (Part No.83A1003)

Multi Purpose Relay

from

$20.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.PTA1749)

ABS Wheel Speed Sensor Connector

from

$25.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

ACDelco – GM Original Equipment Fuel Pump Tank Seal (Part No.E3004289618ACD)

GM Original Equipment Fuel Pump Tank Seal

from

$26.36
The ACDelco GM Original Equipment Fuel Pump Tank Seal is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ACDelco – Fuel Tank Pressure Sensor (Part No.16238399)

Fuel Tank Pressure Sensor

from

$69.99
ACDelco GM Original Equipment Fuel Tank Pressure Sensors are GM-recommended replacements for your vehicle’s original components. These sensors help measure pressure changes within your vehicle’s fuel tank. They also help alert your vehicle’s engine management computer if a leak occurs in your vehicle’s fuel system. These original equipment sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Help measure pressure changes within fuel tank
  • Help alert engine management computer if a leak occurs in fuel system
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Bosch – Fuel Injector 62672: New (Part No.62662)

Fuel Injector 62672: New

from

$48.99
Bosch Port Fuel Injectors (PFI) have a robust design and are capable of using Ethanol fuel (E100). All Bosch fuel injectors released to the aftermarket are OE fit, form and function, and are produced to OE specifications. The Bosch fuel injector has a return rate of 1 part per million (PPM), making Bosch the industry benchmark. Bosch is a recognized OE leader in fuel systems technology, with more than 45 years of gasoline fuel injection experience. The fuel injection program provides vast coverage for Domestic, European, And Asian vehicles.

Product Features:
  • Guaranteed OE fit, form and function
  • Manufactured of the highest quality materials
  • Provides precision flow and original spray pattern for optimal performance
  • Product includes top and bottom mounting o-ring
  • Maintains new-car smoothness and drivability
See More

Carquest Premium – Air Suspension Compressor Motor Connector (Part No.PTC1308)

Air Suspension Compressor Motor Connector

from

$49.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

ACDelco – Manifold Absolute Pressure (MAP) Sensor (Part No.213-1631)

Manifold Absolute Pressure (MAP) Sensor

from

$81.99
ACDelco GM Original Equipment Multi-Purpose Pressure Sensors convert mechanical force into an electrical signal, and are GM-recommended replacements for your vehicle’s original components. They monitor the pressure of various system fluids in your vehicle. These original equipment multi-purpose pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Designed to send accurate measurements to the engine control system
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Motorad – Tethered Fuel Cap (Part No.MGC840T)

Tethered Fuel Cap

from

$30.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Come pre-assembled for quick and easy installation.
  • Several fastener options to work with any fuel cap compartment configuration
  • Fits vehicles orginally equipped with tether
  • Reduces air pollution with proper sealing and venting
  • Manufactured from durable, long-life materials
See More

Felpro – EGR/EXHAUST AIR SUPPLY GASKET (Part No.70914)

EGR/EXHAUST AIR SUPPLY GASKET

from

$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

GM Genuine Parts – Fuel Tank Pressure Sensor Cover (Part No.20893611)

Fuel Tank Pressure Sensor Cover

from

$5.79
GM Genuine Parts Fuel Pressure Sensor Covers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ACDelco – Vapor Canister Purge Valve (Part No.214-1473)

Vapor Canister Purge Valve

from

$52.99
ACDelco GM Original Equipment Vapor Canister Purge Valves are GM-recommended replacements for your vehicle’s original components. The purge valve controls the flow of fuel vapor from the vapor canister to the intake manifold. These original equipment vapor canister purge valves have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Controls vapor flow from canister to engine
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Dorman – Fuel Line Retaining Clip (Part No.800-023)

Fuel Line Retaining Clip

from

$6.99
This fuel line clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this fuel line clip matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

GM Genuine Parts – Fuel Pressure Relief Valve Cap (Part No.214-1044)

Fuel Pressure Relief Valve Cap

from

$6.29
GM Genuine Parts Fuel Pressure Relief Valve Caps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Vapor Canister Vent Solenoid (Part No.214-2308)

Vapor Canister Vent Solenoid

from

$34.99
GM Genuine Parts Vapor Canister Vent Solenoids are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These solenoids communicate with the valve to open and close, allowing air to pass in and out of the vapor canister vent. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Controls fresh air flow to the canister
  • Sends fuel vapors to the engine for re-burn
  • Helps control fuel tank pressure
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ACDelco – Ambient Temp Sensor (Part No.P4025360706ACD)

Ambient Temp Sensor

from

$15.94
Ambient Temp Sensor

NTK – Switching Oxygen Sensor: 4 Wire, 32.5" Long, Heated, Direct Fit (Part No.21565)

Switching Oxygen Sensor: 4 Wire, 32.5" Long, Heated, Direct Fit

from

$149.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

DENSO – First Time Fit Oxygen Sensor (Part No.C5010324697ND)

First Time Fit Oxygen Sensor

from

$152.79
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:
  • SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
  • DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
  • ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
  • STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
See More

Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)

Fuel Injector O-Ring Kit

from

$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

GM Genuine Parts – Fuel Tank Sending Unit O-Ring (Part No.G42)

Fuel Tank Sending Unit O-Ring

from

$22.79
GM Genuine Parts Fuel Tank Sending Unit O-Rings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These O-rings help seal out contaminants, and help protect your vehicle’s fuel tank sending unit. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Help seal out contaminants
  • Help protect fuel tank sending unit
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – Universal Fuel Line Retainer – 5/8 In. (Part No.800-041)

Universal Fuel Line Retainer - 5/8 In.

from

$12.29
This fuel line clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this fuel line clip matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

GM Genuine Parts – Fuel Tank Sending Unit Lock Ring (Part No.TR7)

Fuel Tank Sending Unit Lock Ring

from

$19.79
GM Genuine Parts Fuel Tank Lock Rings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Fuel Injector O-Ring Kit with 16 O-Rings (Part No.217-2444)

Fuel Injector O-Ring Kit with 16 O-Rings

from

$37.99
GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps provide a seal to prevent fuel leaks
  • Helps seal combustion chamber from the elements
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Helping You Find the Right Fuel and Emissions Systems for Your Cadillac XLR

You love your XLR. So we’ve made it easier than ever to help you find Cadillac XLR Fuel and Emissions Systems in our online catalog. Our inventory holds 114 aftermarket and OEM Fuel and Emissions Systems for your Cadillac XLR, ranging from $2.29 to $441.99.

We offer parts from 17 brands trusted to make quality Fuel and Emissions Systems for your Cadillac XLR. Before you buy, take some time to read through customer reviews. We currently have 4,776 reviews of Cadillac XLR Fuel and Emissions Systems from previous customers. Some of the top rated parts include Locking Fuel Cap: 10506, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack with 4.4 stars and MAP Sensor with 4.9 stars.

Find your XLR Fuel and Emissions Systems here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Cadillac XLR part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Fuel and Emissions Systems Brands for Your Cadillac XLR

Our inventory holds Fuel and Emissions Systems for your Cadillac XLR from 17 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest Premium, Bosch, and Felpro, all of which can keep that Cadillac happy.
We have ACDelco parts available for your Cadillac XLR in categories like Air Flow Sensors. Some of the top-rated ACDelco parts in these categories are:
Manifold Absolute Pressure (MAP) Sensor
from $89.99
(2)
Manifold Absolute Pressure (MAP) Sensor
Manifold Air Pressure Sensors

Top-Rated Carquest Premium Fuel and Emissions Systems

Leading Carquest Premium Fuel and Emissions Systems

We carry Carquest Premium brand parts for your Cadillac XLR across several catalog categories, including Gas Caps. Some of our most reviewed Carquest Premium parts include:

FAQs for Cadillac XLR Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the Cadillac XLR?

Out of 114 Fuel and Emissions Systems for the Cadillac XLR, the most popular in our inventory are:
Fuel Injector O-Ring Kit
from $7.49
(109)
Fuel Injector O-Ring Kit
Fuel Injector O-Ring Kits

What are the top-rated Cadillac XLR Fuel and Emissions Systems?

Top-rated Fuel and Emissions Systems for your Cadillac XLR based on customer reviews/ratings are:
MAP Sensor
from $67.05
(27)
MAP Sensor
“It was what I need for the engine light to go off.”
Fuel Line Retaining Clip
from $6.99
(22)
Fuel Line Retaining Clip
“Had in stock when needed”