Cadillac STS TPMS Sensors

GM Genuine Parts Tire Pressure Monitoring Sensors (TPMS) are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are battery powered sensors located in the tire that monitor the vehicle’s tire pressure and warn the driver when pressure falls more than 25% below the manufacturer’s recommendations (normally through a slow pressure loss). The sensor is connected with the valve stem and, by way of Radio Frequency (RF) technology, sends pressure updates to the vehicle’s on-board computer. Tire pressure is displayed on the vehicle’s Driver Information Center (DIC) or, when low, a warning light may be illuminated to warn the driver. U.S. Federal Regulations require that new cars and light trucks be equipped with TPMS starting in 2008. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Battery is made to last up to 10 years of normal use
• Designed to communicate perfectly with your GM vehicle’s TPMS Module
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:

• MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
• COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
• DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
• COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Combined Frequency: 315MHz and 433MHz
• Programmable with Autel TPMS Service Tools
• Exclusive Press Release Button to Easily Replace Valve Stems
• Program to Replace 99% of OE Sensors
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Meets SAE Standards J1205 & J1206
• Maximum Signal Strength / Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:

• MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
• COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
• DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
• COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:

• MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
• COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
• DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
• COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
• ADJUSTABLE: 0-40 degree adjustable stem fits into more aftermarket rim sets
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.

Product Features:

• Includes 4 Rubber Press-in Valve Stems
• Compatible with Autel 1-Sensors
• Compatible with Autel 315MHz & 433MHz MX-Sensors
• Warranty on Material and Workmanship
• High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

Schrader EZ-sensor Programmable TPMS sensor headlines the TPMS product offerings from Schrader TPMS Solutions. Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com – For more information about Schrader and its products visit: www.SchraderTPMS.com

Product Features:

• EZ-sensor must be programmed to specific M/M/Y vehicle
• EZ-sensor Programmable TPMS sensor fits 99% of vehicles on the road
• EZ-sensor can be programmed by most all TPMS programming tools on the Market
• Supports 314.9, 315 and 433 MHz sensor applications
• Always keep your TPMS scan and programming tool up to date with the latest software
• Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
• Aluminum valve can be replaced by Schrader service kit 20049
• Nut Torque = 71 in-lbs
• Valve Core Torque = 3.5 in-lbs

BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.

Product Features:

• 315 MHz TPMS Universal with rubber valve
• Programmable – Only take 3 seconds to configure to specific application
• Always up-to-date with the new programming function via the TPMS diagnostic tool
• Covers multiple applications with one OE equivalent sensor
• Reprogrammable and Copy Clone Capable
• Have WAL technology for locating tire positon
• Supported by Bartec, ATEQ, Snap On, NAPA, Matco and Corghi TPMS Diagnostic tools
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.

Product Features:

• 433 MHz TPMS Universal with metal valve
• Programmable – Only take 3 seconds to configure to specific application
• Always up-to-date with the new programming function via the TPMS diagnostic tool
• Covers multiple applications with one OE equivalent sensor
• Reprogrammable and Copy Clone Capable
• Have WAL technology for locating tire positon
• Supported by Bartec, ATEQ, Snap On, NAPA, Matco and Corghi TPMS Diagnostic tools
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Schrader is the leading global manufacturer of tire pressure monitoring systems (TPMS), and its direct OE TPMS technology can be found in over 50% of vehicles globally. Matching OE quality and performance standards, Schrader sensors undergo extensive OE quality testing, including high speed and extreme temperature tests. Schrader’s global presence as the leading OE supplier means that OE quality and performance come standard with Schrader’s genuine OE replacement sensors. TPMS sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability.

Product Features:

• DIRECT REPLACEMENT: 1 for 1 replacement sensor
• QUICK AND EASY: TPMS sensors are ready out of the box
• VEHICLE FITMENT: Preprogrammed to the specific make, model, and year of a vehicle
• SCHRADER QUALITY: TPMS sensors are produced in Schraders secure and highly automated OE manufacturing facilities
• RELEARN PROCEDURE: A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability

Kit includes four interchangeable metal valve stems. The patented press release valve design allows interchangeable rubber and metal valves to be easily replaced in the same sensor head by hand, with no valve fitting tool required. Simply click in and press out. Installing TPMS sensors has never been so easy.

Product Features:

• Four Metal Valve Stems
• Press-in interchangeable metal valve stem
• Designed with industry leading corrosion protection technology, Autel metal valves are built to match or exceed OE tire valves.
• Press release valve design allows easy installation without a tool for sensor head fitting
• High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

• Rubber TPMS stem for 7002A, 7003, 7004 REDI-Sensor
• 0.453″ rim hole compatibility
• 80 PSI maximum cold inflation pressure

TPMS Rubber Snap-in Valve for GM with Chromed Sleeve

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

• TPMS Aluminum clamp-in valve stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
• 0.453″ rim hole compatiblity
• 200 PSI maximum cold inflation pressure

Tpms Snap-In Valve

Schrader service components are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. All Schrader service components are intended for one-time use only and must be replaced with every tire change. Each service component is tailored to a specific vehicle make, model, and year. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:

• DIRECT REPLACEMENT: Service components are designed to replace original manufacturer parts
• DURABLE: Service components are constructed of high-quality materials to help ensure reliable performance and long service life
• SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
• VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
• PROPER SERVICE: Service components are intended for one-time use only and must be replaced with every tire change
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Schrader service caps are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. All Schrader service components are intended for one-time use only and must be replaced with every tire change. Each service component is tailored to a specific vehicle make, model, and year. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:

• DIRECT REPLACEMENT: Service components are designed to replace original manufacturer parts
• DURABLE: Caps are constructed of high-quality materials to help ensure reliable performance and long service life
• SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
• VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
• PROPER SERVICE: Caps are intended for one-time use only and must be replaced with every tire change
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors