from

$90.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$23.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Complete with clamps
Used to set Toe in or out
replaces rusted or corroded sleeves
Used to connect inner and outer tie rod ends

from

$85.99

This suspension track bar is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment track bar on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$16.49

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$18.99

Driveworks Brand tie rod adjusting sleeves are high-quality, cost-effective parts. Replace tie rod adjusting sleeve to help eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts promote improved steering response.

Product Features:

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability

from

$66.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

from

$35.99

When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$99.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$90.99

Skyjacker(R) steering stabilizer, A steering stabilizer is a dampening shock for your steering system. It dampens out the harshness of the highway, the ‘shimmy’ from running the additional weight of larger tires and wheels and places control back into the driver hands. Stabilizers also reduce the fatigue of the driver on a personal level by reducing the amount of physical strength it takes to guide those larger tires on and off the road. Changing the weak stock unit for a better performing replacement or adding dual steering stabilizers is an inexpensive but worthy investment

Product Features:

Skyjacker(R) Steering Stabilizer Is A Dampening Shock For Your Steering System
Stabilizer Dampens Out The Harshness Of The Highway, The ‘Shimmy’ From Running The Additional Weight Of Larger Tires And Wheels And Places Control Back Into The Driver Hands
Stabilizers Also Reduce The Fatigue Of The Driver On A Personal Level By Reducing The Amount Of Physical Strength It Takes To Guide Those Larger Tires On And Off The Road
Changing The Weak Stock Unit For A Better Performing Replacement Or Adding Dual Steering Stabilizers Is An Inexpensive But Worthy Investment
Reduce Physical Strength Handling Larger Tires

from

$334.99

This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.

Product Features:

Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
Corrosion resistant – salt spray testing and premium coating help ensure future longevity

from

$74.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Returns like-new steering
Long-lasting performance
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$49.99

Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Hex formed studs and/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$321.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Allows adjustment range from 1/2 to 1 1/2
Restores ride height to be within OE specifications for vehicles with a fatigued torsion bar

from

$17.99

OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.

from

$324.99

This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:

Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
Reliable fit – precision-engineered to match the dimensions of original components
Trustworthy construction – manufactured to strict standards using durable materials
Rigorously tested – thorough quality control measures ensure longevity

from

$121.99

This torsion bar mount is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$29.99

This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$22.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$28.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Thermoplastic material
No Squeak
Complete with bolt ,washers, and nut
Improves body roll

from

$236.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Loose or worn chassis parts can lead to premature tire wear
Engineered steel composition results in a stronger component
Engineered to meet or exceed OE standards
Loose or worn chassis parts can lead to premature tire wear
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$395.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$70.99

When the original rack and pinion mount bushings fail on certain GM vehicles, you traditionally have to replace the entire steering rack. This Dorman OE FIX solution provides two bushings and a bracket for replacing only the worn bushings.

Product Features:

Cost-effective repair – this set of rack and pinion mount bushings allows direct replacement of failed bushings
Application specific – made to directly replace suspension steering rack bushings on certain Cadillac, Chevy and GMC vehicles
Hardware included – comes with bracket for complete installation
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$69.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$25.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$6.49

This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:

Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
Durable construction – made of quality materials for leak-free performance and a long service life
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance