2008 Cadillac Escalade Steering and Chassis Parts
More 2008 Cadillac Escalade Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 2008 Cadillac Escalade, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 2008 Cadillac Escalade Steering and Chassis Parts
MOOG – Ball Joint (Part No.K500245)
from
$96.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Dorman – Lower Steering Shaft (Part No.425-130)
from
$378.99
This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.
Product Features:
See More
Product Features:
- Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
- Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
- Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
- Corrosion resistant – salt spray testing and premium coating help ensure future longevity
MOOG – Camber/Caster Adjusting Plate (Part No.K80277)
from
$7.79
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Problem Solver Quick Cam replaces the nonadjustable outboard OEM cam
- Quick Cam camber adjustment range from negative 2.2 to positive 2.5 Degrees
- Easy access Allen wrench slot enables fast and easy caster/camber adjustment
- Quick Cam works with the OEM bolt, significantly reducing installation time
Imperial – Power Steering Oil Cooler Medium Duty (Part No.241010)
from
$36.49
3/4″ x 2-1/2″ x 12″ power steering oil cooler medium duty. Imperial power steering coolers provide additional protection to help prolong the life of the system’s pump, hoses and seals.
Product Features:
See More
Product Features:
- Medium-duty power steering oil cooler
- Size: 3/4″ x 2-1/2″ x 12″
- For vehicle with 3/8″ ID power steering return hose
- Removes destructive heat and helps prolong power steering system life
Dorman – Rack and Pinion Bushing (Part No.523-267)
from
$70.99
When the original rack and pinion mount bushings fail on certain GM vehicles, you traditionally have to replace the entire steering rack. This Dorman OE FIX solution provides two bushings and a bracket for replacing only the worn bushings.
Product Features:
See More
Product Features:
- Rack And Pinion Bushing
- Rack and Pinion Bushing
- When the original rack and pinion mount bushings fail on certain GM vehicles, you traditionally have to replace the entire steering rack. This Dorman OE FIX solution provides two bushings and a bracket for replacing only the worn bushings.
- Cost-effective repair – this set of rack and pinion mount bushings allows direct replacement of failed bushings
- Application specific – made to directly replace suspension steering rack bushings on certain Cadillac, Chevy and GMC vehicles
ACDelco – Steering Rack Seal K (Part No.M1022947778ACD)
from
$25.09
Steering Rack Seal K
Carquest Premium – Back Up Light Connector (Part No.PTA1061)
from
$27.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Dorman – Suspension Stabilizer Bar (Part No.927-101)
from
$199.99
This suspension stabilizer bar, also called a sway bar, matches the fit and function of the original sway bar on specified vehicles to restore reliable vehicle handling. With a corrosion-resistant finish, it includes installation hardware.
Product Features:
See More
Product Features:
- Ideal replacement – this sway bar matches the fit and function of the original part on specified vehicle years, makes and models
- Durable construction – this sway bar is made of quality materials with a corrosion-resistant finish
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone testing to ensure a quality fit and long service life
Dorman – Suspension Control Arm (Part No.524-621)
from
$84.99
This suspension track bar is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment track bar on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Tie Rod End (Part No.EV801527)
from
$52.99
Tie Rod End
Powercraft – Rack Pinion Seal Kit (Part No.9045)
from
$119.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
MOOG – Caster/Camber Adjusting Kit (Part No.K6302HD)
from
$47.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Track Bar Bushing (Part No.K201774)
from
$11.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Returns like-new steering
- Long-lasting performance
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
MOOG – Alignment Guide Pin, sold by each (Part No.K6716)
from
$2.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Replaces broken OEM pins
- Box of 12
Powercraft – Pump Complete Rebuild Kit (Part No.7910)
from
$62.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Carquest Premium – Chassis Wiring Harness Connector (Part No.PTA2913)
from
$90.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Powercraft – Pump Seal Kit (Part No.7918)
from
$36.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Carquest Premium – Return Hose Assembly (Part No.40031)
from
$53.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Cardone – Rack and Pinion Assembly (Part No.22-1145)
from
$435.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
MOOG – Stabilizer Bar Bushing Kit (Part No.K6453)
from
$27.49
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS┐–┐Made from high-quality thermoplastic material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
MOOG – Stabilizer Bar Bushing Kit (Part No.K6439)
from
$27.49
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Made from high-quality thermoplastic material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
MOOG – Rack & Pinion Bellows Kit (Part No.K150419)
from
$27.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
- STRONG AND DURABLE — Engineered to match or exceed OE requirements
- RESTORES RIDE — Provides revamped steering and handling feel
- QUIET DRIVE — Replacement can reduce front end noise
MOOG – Ball Joint (Part No.K6541)
from
$92.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Cardone – Power Steering Filter (Part No.20-0038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Driveworks – Taper Bearing Cone (Part No.S-M-88048)
from
$11.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Driveworks – Steering Tie Rod End (Part No.DW-ES2838RL)
from
$33.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
- A slotted nut and cotter pin for a more secure installation
MOOG – Caster/Camber Adjusting Kit (Part No.K6302)
from
$50.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Caster/Camber Adjusting Kit (Part No.K100159)
from
$72.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Popular 2008 Cadillac Escalade Steering and Chassis Parts Categories
2008 Cadillac Escalade Steering and Chassis Parts
You count on your 2008 Cadillac Escalade to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 123 Steering and Chassis Parts ranging in price from $2.99 to $1,065.99, you’re sure to find everything you need for your 2008 Cadillac Escalade.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 15 different brands like Moog, Driveworks, and Carquest Premium. 2008 Cadillac Escalade Steering and Chassis Parts start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,628 extensive product reviews on 2008 Cadillac Escalade Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Power Steering Filter with 3.8 stars and Power Steering Pump with 3.3 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2008 Cadillac Escalade below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 2008 Cadillac Escalade
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2008 Cadillac Escalade running right for years to come. In our inventory you’ll find brands like Moog, Driveworks, Carquest Premium, and even more.
Popular MOOG Steering and Chassis Parts
You’ll find popular MOOG brand products across Camber Kits and Sway Bars. All are waiting to get your 2008 Cadillac Escalade back on the road. Some of the top-rated MOOG products in these categories are:
Top-Rated MOOG Steering and Chassis Parts
If MOOG are what you’re looking for, our inventory holds plenty. We stock MOOG brand Steering and Chassis Parts for your 2008 Cadillac Escalade, and some of our most reviewed MOOG parts include:
FAQs for 2008 Cadillac Escalade Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 2008 Cadillac Escalade?
Out of 123 Steering and Chassis Parts for the 2008 Cadillac Escalade, the most popular in our inventory are:
What are the top-rated 2008 Cadillac Escalade Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 2008 Cadillac Escalade based on customer reviews/ratings are:
