Cadillac Escalade EXT TPMS Sensors

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• CarQuest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

Schrader is the leading global manufacturer of tire pressure monitoring systems (TPMS), and its direct OE TPMS technology can be found in over 50% of vehicles globally. Matching OE quality and performance standards, Schrader sensors undergo extensive OE quality testing, including high speed and extreme temperature tests. Schrader’s global presence as the leading OE supplier means that OE quality and performance come standard with Schrader’s genuine OE replacement sensors. TPMS sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability.

Product Features:

• DIRECT REPLACEMENT: 1 for 1 replacement sensor
• QUICK AND EASY: TPMS sensors are ready out of the box
• VEHICLE FITMENT: Preprogrammed to the specific make, model, and year of a vehicle
• SCHRADER QUALITY: TPMS sensors are produced in Schraders secure and highly automated OE manufacturing facilities
• RELEARN PROCEDURE: A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Maximum Signal Strength, Battery Reliability.
• 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
• Combined Frequency – 315MHz and 433MHz
• Programmable with Autel TPMS Service Tools
• Program to Replace 99 Percent of OE Sensors
• Meets SAE Standards J1205 and J1206
• Maximum Signal Strength, Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

The 300050 is a convenient bulk box of 240 individually bagged Autel MX-Sensor 1-Sensors. The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Bulk Box of (240) Individually Bagged 1-Sensors with Rubber Press-in Valve
• Bulk Box of 240 Individually Bagged 1-Sensors with Rubber Press-in Valve
• Combined Frequency 315MHz and 433MHz
• Programmable with Autel TPMS Service Tools
• Program to Replace 99% of OE Sensors
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Maximum Signal Strength / Battery Reliability
• Maximum Signal Strength, Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Combined Frequency: 315MHz and 433MHz
• Programmable with Autel TPMS Service Tools
• Exclusive Press Release Button to Easily Replace Valve Stems
• Program to Replace 99% of OE Sensors
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Meets SAE Standards J1205 & J1206
• Maximum Signal Strength / Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Product Features:

• Bulk Box of (20) Individually Bagged 1-Sensors with Metal Press-in Valve
• Combined Frequency: 315MHz & 433MHz
• Programmable with Autel TPMS Service Tools
• Exclusive Press Release Button to Easily Replace Valve Stems
• Program to Replace 99% of OE Sensors
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Meets SAE Standards J1205 & J1206
• Maximum Signal Strength / Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now, and into the future we will be there for you, our customer.

Product Features:

• Installs right out of the box
• No sensor programing required
• Works with all major TPMS scan tools
• No training required – designed to follow existing OE vehicle relearn procedures
• Faster TPMS scan tool hunt mode
• Reduces SKUs
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

• TPMS Aluminum clamp-in valve stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
• 0.453″ rim hole compatiblity
• 200 PSI maximum cold inflation pressure

Product Features:

• Self tapping screws
• 11.5 in/lbs screw torque
• 80 psi maximum cold inflation pressure

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

• Black anodized clamp-in stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
• 0.453″ rim hole compatibility
• 200 PSI maximum cold inflation pressure

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, & tools.

Product Features:

• Chrome clamp-in stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
• 0.453 in. rim hole compatibility
• 200 PSI maximum cold inflation pressure

TPMS Rubber Snap-in Valve for GM with Chromed Sleeve

Tpms Snap-In Valve

Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:

• MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
• COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
• DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
• COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now, and into the future we will be there for you, our customer.

Product Features:

• Installs right out of the box
• No sensor programing required
• Works with all major TPMS scan tools
• No training required – designed to follow existing OE vehicle relearn procedures
• Faster TPMS scan tool hunt mode
• Reduces SKUs
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now and into the future we will be there for you, our customer.

Product Features:

• Metal clamp-in stem.
• Works with most major TPMS Scan tools
• Reduces SKUs
• OE Designed and Validated
• Advance anodization of valve stems and hex nuts
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

ACDelco GM Original Equipment Tire Pressure Monitoring Sensors (TPMS) are battery powered sensors located in the tire that monitor the vehicle’s tire pressure and warn the driver when pressure falls more than 25% below the manufacturer’s recommendations (normally through a slow pressure loss), and are GM-recommended replacements for your vehicle’s original components. The sensor is connected with the valve stem and, by way of Radio Frequency (RF) technology, sends pressure updates to the vehicle’s on-board computer. Tire pressure is displayed on the vehicle’s Driver Information Center (DIC) or, when low, a warning light may be illuminated to warn the driver. U.S. Federal Regulations require that new cars and light trucks be equipped with TPMS starting in 2008. These original equipment tire pressure monitoring sensors have bn manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Battery is made to last up to 10 years of normal use
• Designed to communicate perfectly with your GM vehicle’s TPMS Module
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

ACDelco GM Original Equipment Tire Pressure Monitoring Sensors (TPMS) are battery powered sensors located in the tire that monitor the vehicle’s tire pressure and warn the driver when pressure falls more than 25% below the manufacturer’s recommendations (normally through a slow pressure loss), and are GM-recommended replacements for your vehicle’s original components. The sensor is connected with the valve stem and, by way of Radio Frequency (RF) technology, sends pressure updates to the vehicle’s on-board computer. Tire pressure is displayed on the vehicle’s Driver Information Center (DIC) or, when low, a warning light may be illuminated to warn the driver. U.S. Federal Regulations require that new cars and light trucks be equipped with TPMS starting in 2008. These original equipment tire pressure monitoring sensors have bn manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Battery is made to last up to 10 years of normal use
• Designed to communicate perfectly with your GM vehicle’s TPMS Module
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.

Product Features:

• Includes 4 Rubber Press-in Valve Stems
• Compatible with Autel 1-Sensors
• Compatible with Autel 315MHz & 433MHz MX-Sensors
• Warranty on Material and Workmanship
• High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

Schrader service components are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. All Schrader service components are intended for one-time use only and must be replaced with every tire change. Each service component is tailored to a specific vehicle make, model, and year. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:

• DIRECT REPLACEMENT: Service components are designed to replace original manufacturer parts
• DURABLE: Service components are constructed of high-quality materials to help ensure reliable performance and long service life
• SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
• VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
• PROPER SERVICE: Service components are intended for one-time use only and must be replaced with every tire change
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors