Cadillac Escalade EXT Air Intakes

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• NTK’s Throttle Position Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper feedback to the ECU to control engine performance.
• The Throttle Position Sensor (TPS) reports the angle of the throttle plate to the PCM for optimal engine operation under all engine load conditions.

Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:

• Delphi sensors are built to meet or exceed OE requirements and testing
• Not impacted by temperature changes and provide robust, long-lasting sensor protection
• Designed digital output for maximum signal to noise ratio

GM Genuine Parts Fuel Injection Throttle Body Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide an air- and liquid-tight connection between throttle body components, and are GM-recommended replacements for your vehicle’s original components. Replace this seal whenever you service the throttle body. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Helps prevent excess air form entering the intake
• Helps seal the intake and throttle from the elements
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

GM Genuine Parts Fuel Injection Throttle Body Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide an air- and liquid-tight connection between throttle body components, and are GM-recommended replacements for your vehicle’s original components. Replace this seal whenever you service the throttle body. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Helps prevent excess air form entering the intake
• Helps seal the intake and throttle from the elements
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

Hitachi’s Electronic Throttle Bodies (ETBs) are designed to provide extraordinary accuracy with quick response times. High quality materials ensure that even under the most extreme conditions, Hitachi’s ETBs will not deform or malfunction. Precision Throttle Position Sensor (TPS) Circuitry maintains accurate engine mapping resulting in optimal fuel economy and performance with the lowest possible emissions. Details such as internal gear sizes, tooth count, materials, and protected circuitry provide a durable and reliable product. Designed to meet the exact needs of each specific vehicle, Hitachi’s electronic throttle bodies are the premium choice.

Product Features:

• Advanced throttle position sensor technology ensures smooth idle conditions and precise air flow metering
• Hitachi is a Tier 1 OE supplier for Throttle bodies
• 100% NEW, never remanufactured
• Precision TPS Circuitry maintains accurate engine mapping; Pemium componentry allows for extended durability; Tailored for each vehicle to reduce install times.
• These quality Electronic Throttle Bodies feature precise throttle opening, improved fuel economy and reduced emissions.
• Powerful electric motor provides quick and accurate response for optimal engine efficiency
• Electronics are sealed to prevent contamination that may result in inaccurate readings
• Detailed manufacturing tracking system using QR codes

This electronic throttle body module is a reliable direct replacement for the original equipment module on specific vehicles. It is thoroughly tested to restore proper performance.

Product Features:

• Direct replacement – this throttle actuator control module directly replaces the original module on certain vehicle applications
• Effective fix – this module restores proper throttle body operation to ensure maximum efficiency
• Durable materials – high-grade electronic components withstand extreme temperature fluctuations to prevent future failures
• Trustworthy quality – backed by team of engineers in the United States

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

• All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
• MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
• Intake manifold gasket set contains manifold gasket(s) needed to replace an intake manifold.
• The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
• SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
• EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
• PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
• EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
• EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.

Product Features:

• Precision Machined From T-6061 Billet Aluminum
• Special Helix Design
• Produces Increased HP/Torque/Throttle Response
• Fits w/aFe Intakes

Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.

Product Features:

• Precision Machined From T-6061 Billet Aluminum
• Special Helix Design
• Produces Increased HP/Torque/Throttle Response
• Fits w/aFe Intakes

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

The Hitachi Electronic Throttle Body is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• OE Manufactured assemblies include Throttle Position sensors
• Controls the volume of air flowing into the engine
• Improves engine power, fuel economy and emissions performance

The Hitachi Electronic Throttle Body is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• OE Manufactured assemblies include Throttle Position sensors
• Controls the volume of air flowing into the engine
• Improves engine power, fuel economy and emissions performance

The ACDelco GM Original Equipment Fuel Injection Throttle Body Gasket is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:

• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• Utilizing high grade materials to ensure peak conductivity and perfect connections
• Decades of industry leading research and development focused on meeting the technician’s needs
• With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

These nuts are manufactured using durable materials and corrosion tested to ensure required strength and longevity.

Product Features:

• Durable materials – manufactured to specific thread tolerance standards
• Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
• Multipurpose usefulness – can be used in a variety of applications, from auto to home
• Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

This engine intake manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It is thoroughly tested to ensure top-quality OEM construction and superior reliability.

Product Features:

• Ideal replacement – this intake manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
• Reliable construction – tested to ensure top-quality OEM performance and durability
• Perfect fit – designed to match all specifications of the original part for convenient, trouble-free installation
• Trustworthy design – built by the industry leader in aftermarket manifolds

The ACDelco GM Original Equipment Engine Intake Manifold is a GM-recommended replacement for your vehicle’s original component. The intake manifold evenly distributes the incoming engine air to each of the cylinders, ensuring the proper amount of air mixes with the proper amount of fuel. This original equipment engine intake manifold has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Thermoplastic, aluminum, and cast iron intake manifolds available for a wide range of applications
• Designs are enhanced and amended to incorporate updates, upgrades, and Technical Service Bulletins
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function