from

$159.99

Yoke holder tool, fits most yokes. 1310/1330/1350/1410/7260/7290/MR3/Toyota. No return.

Product Features:

Yoke holder tool
Firmly holds pinion yoke in place allowing for easier pinion preload setting

from

$50.99

Schrader service components are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. All Schrader service components are intended for one-time use only and must be replaced with every tire change. Each service component is tailored to a specific vehicle make, model, and year. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:

DIRECT REPLACEMENT: Service components are designed to replace original manufacturer parts
DURABLE: Service components are constructed of high-quality materials to help ensure reliable performance and long service life
SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
PROPER SERVICE: Service components are intended for one-time use only and must be replaced with every tire change
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$239.99

If you’ve installed tires that are larger or smaller than original equipment tires, or if you have installed a ring and pinion gear set with a different rear gear ratio, the Max Energy Spectrum allows you to re-program for correct speedometer readings, as well as correct part-throttle shifting. The vehicle’s computer calculates your vehicle’s speed based on the diameter of the stock tires. If you’ve installed taller or shorter tires, or changed the rear gear ratio, the vehicle’s computer doesn’t know how fast your vehicle is going. As a result, the automatic transmission may not shift correctly and the speedometer readings will not be accurate (as required by law).

Product Features:

Speedometer correction for multiple tire sizes
Return back to factory settings
Reads/Displays/Clears Diagnostic Trouble Codes (DTC’s)
Internet updateable
Product might not be available in all states due to local laws.

from

$456.99

The BDX hand-held performance tuner gives drivers the edgepower they need, whether tackling tough terrain, pulling a heavy payload, or maximizing fuel economy on the highway. Its sleek design, full-color display, and customizable gauges help track and adjust powertrain performance to deliver more horsepower and torque when it’s needed most. Cloud-based tune delivery over built-in WiFi means that the BDX will always be running the latest tuning – enabling drivers to stay one step ahead of the packÿ.

Product Features:

Monitor and display vehicle data using the on-screen virtual gauges.
Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
Reads and clears DTC (Diagnostic Trouble Codes) with ease
Product might not be available in all states due to local laws.

from

$31.99

The Dayco ela belt installation tool is required when specified on certain ela (stretch to fit) belt applications. Note: some ela belts requires only a simple zip tie to install, please verify the Dayco ela belt installation tool is required for your application. Do not attempt to install by prying the belt on the pulleys.

Product Features:

Ela belt and belt tool sold separately
Can be used on multiple Dayco ela (stretch to fit) belts
Includes reusable mounting bolt
Includes installation instructions

from

$135.99

Product Features:

Precise Gear Alignment – Designed specifically for LS engines to ensure accurate and damage-free camshaft gear installation
Heavy-Duty Construction – Built from durable materials to withstand repeated use in professional or DIY engine builds
Time-Saving Design – Streamlines the installation process, reducing the risk of errors and speeding up assembly
Engine-Specific Fitment – Tailored to match LS camshaft gear profiles for a secure, slip-free installation every time

from

$12.99

This A/C service valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this A/C service valve is designed to match the fit and function of the original valve on specified vehicles
Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$11.49

Spare tire hoist access tube no longer secure: The bracket that retains the hoist tube has probably rusted away. This spare tire hoist support replaces the original part to properly secure the access tube.

Product Features:

Product Features:

Direct replacement – this spare tire hoist retainer matches the fit and function of the original equipment part
Easy to install – no special tools required to install this spare tire hoist support
Durable materials – manufactured from sturdy materials for a reliable service life
Quality fit – this spare tire hoist support has been dimensionally tested to ensure accurate fit and function

from

$0.99

Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.

Product Features:

Manufactured with quality materials to suppress high stress levels
Direct replacement for a proper fit
Corrosion resistant coating for long-lasting durability against harsh roads
Provides smoother braking
This part matches Original Equipment (OE) quality specifications

from

$4.29

Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.

Product Features:

Manufactured with quality materials to suppress high stress levels
Direct replacement for a proper fit
Corrosion resistant coating for long-lasting durability against harsh roads
This part matches Original Equipment (OE) quality specifications

from

$1.49

This brake bleeder screw is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake bleeder screw matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$7.49

This brake bleeder screw is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake bleeder screw matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$0.99

Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.

Product Features:

Manufactured with quality materials to suppress high stress levels
Direct replacement for a proper fit
Corrosion resistant coating for long-lasting durability against harsh roads
Provides smoother braking
This part matches Original Equipment (OE) quality specifications

from

$23.99

Schrader service components are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. All Schrader service components are intended for one-time use only and must be replaced with every tire change. Each service component is tailored to a specific vehicle make, model, and year. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:

DIRECT REPLACEMENT: Service components are designed to replace original manufacturer parts
DURABLE: Service components are constructed of high-quality materials to help ensure reliable performance and long service life
SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
PROPER SERVICE: Service components are intended for one-time use only and must be replaced with every tire change
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$121.99

When replacing the rear main seal cover on specified vehicle applications, this must-have tool ensures the cover is properly aligned on the crankshaft to prevent damage and leaks. Made of steel, it’s finished with zinc plating for durability.

Product Features:

Ideal solution – this must-have rear main seal cover installation tool ensures the cover is properly aligned on the crankshaft
Application specific – engineered for a proper repair on specified applications
Convenient and valuable – helps ensure alignment to prevent damage and leaks
Durable construction – machined from low-carbon steel, zinc-plated and clear-chromate-coated for durability