Cadillac Commercial Chassis Performance and Racing Products
Top Cadillac Commercial Chassis Performance and Racing Products Categories
We carry over 50 Performance and Racing Products in inventory for the Cadillac Commercial Chassis. If you’re looking for aftermarket Performance and Racing Products for your Cadillac Commercial Chassis, check out all these categories:
Essential Cadillac Commercial Chassis Performance and Racing Products
B & M – Tork Master 3000 (Part No.20402)
from
$499.99
Torque Converter – Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New allow steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
- Washer Between Turbine and Cover
Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)
from
$40.99
Brake Bleeder Screws
B & M – Automatic Shifter, Hammer Shifter, Universal (Part No.80885)
from
$339.99
The Hammer shifter may just be the most comfortable and versatile shifter available. The unique design of the shift handle easily fits all sizes of hands providing the appropriate wrist angle and feel when shifting. The multi-position lockout trigger is s
Product Features:
See More
Product Features:
- Ratchet Action Shifter
- Cable Operated
- Quick Installation
- Accurate Shifting
- Reverse Lockout Feature
MSD Ignition – Rotor; GM HEI (Part No.8410)
from
$13.29
Replacement rotor for Chevrolet HEI style distributors.
Product Features:
See More
Product Features:
- For HEI distributors
- Resist carbon tracking
- Low resistance brass
- Max voltage transfer
- Molded from insulated material
MSD Ignition – Mod HEI Dust Cover, V8 & Odd Fire V6 (Part No.8401)
from
$72.99
Stock style replacement modified HEI coil dust cover. Used on 8 cylinder vehicles only.
Product Features:
See More
Product Features:
- Externally mounted coil
- Increases reliability
- Increase performance
- High quality plastic
- Resist spark loss
- Use brass conductors
- Low resistance connections
- No modifications
PerTronix – D9001 Flame-Thrower HEI Distributor Advance Curve Kit (Part No.D9001)
from
$26.99
Mechanical Advance Curve Ki tPrecision machined chromoly weights and center plate eliminate erratic timing. Three sets of springs, guide bushings and complete installation instructions make recurving your distributor easy.
Product Features:
See More
Product Features:
- PerTronix D9001 Flame-Thrower HEI Distributor Advance Curve Kit
- Precision machined chromoly weights and center plate.
Edelbrock – Performer RPM Carb/Plate Nitrous Systems Square-Bore Carbs (100-250 Hp) (Part No.70090)
from
$875.99Product Features:
- Designed For Carbureted V8s
- Power Increases From 100-250 HP
- Precision EDM Machined Spray Bars
- Simple To Install
B & M – Transpak For 65-87 TH400 Transmission (Part No.20228)
from
$141.99
The B&M Transpak has all the features in the Shift Improver Kit, plus it provides additional driver manual control. Retain full automatic features and standard shift points with selector in Drive.
Product Features:
See More
Product Features:
- Recalibrate Auto. Transmission
- Optimum Performance
- Select Your App. Mode
- Improves Transmission Life
- Trans. Removal Not Required
- Downshift At Any Speed
- Great For Trailer Towing
- For Heavy Loads Driving Downhill
Energy Suspension – Ball Joint Dust Boot Set (Part No.9.13128R)
from
$10.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Lasts Longer
- Looks Great
Edelbrock – CARBURETOR (Part No.14054)
from
$488.99
Product Features:
See More
- EnduraShine Finish
- GM/AMC-Style Throttle Linkage
- Can Add Electric Choke PN[1478]
- Easy Tuning with 2-Piece Design
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Mr. Gasket – Alternator Bracket (Part No.9850)
from
$25.99
Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- F-Style
- Heavy Gauge Steel Construction
- Fits Small Block Chevy 265-400 CID
- Must Be Used With Part 9852
Competition Cams – Set of 16 Single Springs w/ 1.254" O.D., 1.254" I.D., 1.700" Installed Height (Part No.981-16)
from
$126.99
Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.
Product Features:
See More
Product Features:
- Seat pressure: 105 lbs. @ 1.700″, Open Pressure: 273 lbs. @ 1.250″
- O.D.: 1.254″, I.D.: .880″
- Single valve springs with damper
- Approximately .490″ max lift at recommended installed height
Powertrax – Lock Right Locker (Part No.1910-LR)
from
$376.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
MSD Ignition – Distributor Cap and Rotor; GM HEI Distributor; Red (Part No.8416)
from
$46.49
The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.
Product Features:
See More
Product Features:
- Designed w/Performance In Mind
- High Quality Material
- Stainless Terminals
- Performance replacement part
B & M – Transmission Kit, Master Overhaul Kit For TH400 (Part No.21041)
from
$409.99
These kits include all of the necessary components to rebuild your automatic transmission. OEM style gaskets included. Kits do not include overhaul instructions – please refer to factory shop manual for proper assembly procedures.
Product Features:
See More
Product Features:
- Complete High Perf. Or Racing Trans. Overhaul
- Includes Only OEM Valvebody Gaskets
- Instructions Not Included
Edelbrock – Performer RPM 2 Carb/Plate Nitrous Systems Square-Bore Carbs (200-400+ Hp) (Part No.70080)
from
$801.99Product Features:
- Designed For Carbureted V8 Engines
- Enhanced Flow Capacity
- Softens The Hit Of The Nitrous System
- Simple To Install
Edelbrock – Performer RPM Carb/Plate Nitrous Systems 4500 Series Carbs (100-150-250 Hp) (Part No.70053)
Edelbrock – Performer RPM Carb/Plate Nitrous Systems Square-Bore Carbs (100-250 Hp) (Part No.70050)
FAG US – CUP (Part No.LM48510)
from
$7.69
CUP
MSD Ignition – Distributor Cap; GM HEI; Red (Part No.8411)
from
$49.49
The cap of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap. To make things easy, we now offer these caps as replacement kits.
Product Features:
See More
Product Features:
- Stock GM HEI replacement distributor cap
- Red
Cadillac Commercial Chassis Performance and Racing Products Categories
Helping You Find the Right Performance and Racing Products for Your Cadillac Commercial Chassis
You love your Commercial Chassis. So we’ve made it easier than ever to help you find Cadillac Commercial Chassis Performance and Racing Products in our online catalog. Our inventory holds 50 aftermarket and OEM Performance and Racing Products for your Cadillac Commercial Chassis, ranging from $7.69 to $1,138.99.
We offer parts from 12 brands trusted to make quality Performance and Racing Products for your Cadillac Commercial Chassis. Before you buy, take some time to read through customer reviews. We currently have 2,293 reviews of Cadillac Commercial Chassis Performance and Racing Products from previous customers. Some of the top rated parts include CARBURETOR with 5.0 stars and Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet with 5.0 stars.
Find your Commercial Chassis Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Cadillac Commercial Chassis part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Performance and Racing Products Brands for Your Cadillac Commercial Chassis
Our inventory holds Performance and Racing Products for your Cadillac Commercial Chassis from 12 trusted brands. You’ll find OEM and aftermarket parts from brands like MSD Ignition, Edelbrock, and Accel, all of which can keep that Cadillac happy.
We have Accel parts available for your Cadillac Commercial Chassis in categories like Performance Ignition Products. Some of the top-rated Accel parts in these categories are:
Top-Rated Edelbrock Performance and Racing Products
Leading Edelbrock Performance and Racing Products
We carry Edelbrock brand parts for your Cadillac Commercial Chassis across several catalog categories, including Performance Fuel Systems. Some of our most reviewed Edelbrock parts include:
from
$428.99
(55)
Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet
Performance Carburetors
from
$394.99
(10)
Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
Performance Carburetors
from
$451.99
(7)
Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
Performance Carburetors
FAQs for Cadillac Commercial Chassis Performance and Racing Products
What are the most purchased Performance and Racing Products for the Cadillac Commercial Chassis?
Out of 50 Performance and Racing Products for the Cadillac Commercial Chassis, the most popular in our inventory are:
from
$46.49
(49)
Distributor Cap and Rotor; GM HEI Distributor; Red
Performance Distributor Cap and Rotor Kits
What are the top-rated Cadillac Commercial Chassis Performance and Racing Products?
Top-rated Performance and Racing Products for your Cadillac Commercial Chassis based on customer reviews/ratings are:
from
$488.99
(3)
CARBURETOR
“Shines like a new penny…. icing on the cake …. it just tops off the motor… what else can you say.”
from
$494.99
(3)
Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet
“i put this carb on my dump truck and i couldn’t be more pleased. my truck runs great and has better mpg and increased power”
