Cadillac ATS Ignition and Tune-Up Products

Designed to be an ideal replacement for your vehicle’s worn equipment, ACDelco Professional, premium aftermarket Auto Wire and Auto Cable products are built to meet nearly every application and budget. ACDelco meet or exceed most original manufacturers’ specifications. Built to exacting specifications, and extensively tested, ACDelco Auto Wires and Auto Cables includes our Original Equipment line for GM vehicles and a select offering of premium aftermarket Professional products for GM and non-GM vehicles. ACDelco Professional, premium aftermarket Direct Ignition Coil-on-Plug Boots seal snugly against the spark plug’s insulator, keeping moisture and contaminates out and promoting longer spark plug life. They are thoroughly engineered to meet or exceed your expectations for fit, form, and function. ACDelco Professional Direct Ignition Coil-on-Plug Boots provide the performance and dependability you expect from ACDelco.

Product Features:

• Weather tight boot seal for protection against moisture intrusion
• High temperature resistant silicone for protection against thermal overload
• Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the spark plug
• Premium, high-quality aftermarket spark plug boot Signs that you might need to replace your direct ignition coil-on-plug boot are:
• Engine will not start or run
• Reduced Power
• Excessive tailpipe emissions
• Check Engine Light is on
• Engine misfire
• Reduced fuel economy

ACDelco GM Original Equipment Ignition Knock (Detonation) Sensors monitor the engine for pinging or spark knock, and are GM-recommended replacements for your vehicle’s original components. These sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion; the engine control module uses these signals to adjust the ignition timing and air/fuel mixture. These original equipment ignition knock sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Sends signals to the engine control module (ECM) to adjust timing
• Helps prevent damage to the engine caused by pre-ignition
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• Reinforced and extra-strength components are used to reduce chance of part failure and prevent corrosion and moisture penetration. Mounting threads match OE for easy, worry free installation.
• NTK’s Ignition Knock Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper ignition timing. This advanced technology is used for durability, drivability and fuel economy.
• The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock, or detonation, to alter the ignition timing and prevent detonation.

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:

• OE design ensures a tight boot seal that protects against moisture intrusion
• High temperature resistant material provides greater protection against thermal overload
• Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
• Engineered to the specifications used by the original vehicle manufacturer for an exact fit

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

An ACDelco GM Original Equipment Ignition Coil is a GM-recommended replacement for your vehicle’s original component, and undergoes more stringent testing than aftermarket products. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco GM OE Ignition Coil uses pure copper windings to improve durability and provide higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This original equipment ignition coil has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
• Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
• Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Carquest Premium ignition coil sets meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coil sets are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coil sets with an industry-leading warranty. Carquest Premium ignition coil sets are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Built by IATF 16949 certified manufacturers for consistent durability
• Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
• Segmented secondary bobbins to distribute high voltage and prevent shorting
• Extensive design validation testing to ensure long-lasting reliability
• 100% end-of-line tested to ensure proper performance
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
• Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure confidence and product reliability, every time.

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Carquest Premium spark plug boots are engineered to restore ignition boot reliability and performance. They are designed to meet or exceed original equipment (O.E.) specifications for fit, form and function. Our spark plug boots offer excellent heat resistance as well as maximum protection against spark loss. Carquest Premium spark plug boots are built with a durable silicone compound for resistance to high heat and abrasion, resulting in a longer-lasting ignition repair.

Product Features:

• OE design provides an exact fit for your application
• Provides excellent heat resistance as well as maximum protection against spark loss
• Durable silicone compound for resistance to high heat or abrasion
• Spring included with the spark plug boot
• Design for direct compatibility

Coil On Plug Insulator Boot: Spring included, Designed for direct fit

NGK Laser Platinum spark plugs provide high ignitability and longer service life. Dual platinum surfaces ensure slow wear rate providing stable idle, superior anti fouling, improved fuel efficiency and lower emissions. The platinum disc welded to backside of ground electrode provides long life, faster starts and quicker acceleration. Laser Platinum spark plugs provide high ignitability and longer service life.

Product Features:

• Laser welded Platinum center electrode tip
• Platinum disc welded to backside of ground electrode provides long life
• Trivalent Metal Plating provides superior anti-corrosion and anti-seizing properties
• Faster starts and quicker acceleration
• Better fuel economy and lower emissions
• Best Platinum spark plug available
• Original Equipment Manufacturer approved design

Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles engineered to meet strict Ford engineering standards to provide original equipment performance and reliability. Delivering performance, reliability and confidence, Motorcraft spark plugs are available for a broad range of applications, including domestic and import cars and trucks of all makes and sizes.

Product Features:

• Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
• Backed by Motorcraft’s Service Parts Warranty
• Exact fit for Ford, Lincoln and Mercury vehicles
• Resistant to oxidation and arc erosion.
• Multi-rib insulator protects against misfire.
• Service intervals of up to 100,000 miles.
• Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
• Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
• Motorcraft ignition components help prevent false check engine lights.

NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode’s durability is six times harder than platinum. Iridium alloy’s extremely high melting point is perfect for today’s engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.

Product Features:

• SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
• IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
• TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
• RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs

Our best spark plug! Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.

Product Features:

• 0.6 mm finewire design improves ignitability
• Patented V-trimmed platinum sidewire technology resists wear
• OE equivalent design is engineered for every engine
• Designed for better overall durability with virtually no gap erosion

NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode’s durability is six times harder than platinum. Iridium alloy’s extremely high melting point is perfect for today’s engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.

Product Features:

• SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
• IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
• TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
• RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs

NGK Ruthenium HX High Ignitability spark plugs are the best in class plug for todays modern vehicles. Patented Ruthenium technology offers the most advance tip technology and delivers the highest performance and life expectancy. Created from advanced OE t

Product Features:

• HIGH IGNITABILITY PROJECTED SQUARE PLATINUM ELECTRODE DESIGN: Combines 0.6 millimeter ruthenium center with a unique cut-back PSPE ground electrode
• RUTHENIUM ALLOY CENTER ELECTRODE: NGK’s patented ruthenium technology produces maximum performance, ignitability & durability at high temperatures
• PSPE DESIGN: Projected square platinum electrode shape of the ground electrode provides the best ignitability and service life for high heat engines
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
• RECOMMENDED USAGE: Modern vehicles using OE PSPE type spark plugs or for those seeking an aftermarket plug with the latest OE technology

SPARK PLUG

Durability of an OE style plug combined with Power & Torque of high performance.

Product Features:

• 0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
• 0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
• DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
• DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
• Durability of an OE style plug combined with Power & Torque of high performance.
• Withstands temperatures greater than 4000° Fahrenheit
• Iridium TT

Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles engineered to meet strict Ford engineering standards to provide original equipment performance and reliability. Delivering performance, reliability and confidence, Motorcraft spark plugs are available for a broad range of applications, including domestic and import cars and trucks of all makes and sizes.

Product Features:

• Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
• Backed by Motorcraft’s Service Parts Warranty
• Exact fit for Ford, Lincoln and Mercury vehicles
• Resistant to oxidation and arc erosion.
• Multi-rib insulator protects against misfire.
• Service intervals of up to 100,000 miles.
• Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
• Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
• Motorcraft ignition components help prevent false check engine lights.

Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles engineered to meet strict Ford engineering standards to provide original equipment performance and reliability. Delivering performance, reliability and confidence, Motorcraft spark plugs are available for a broad range of applications, including domestic and import cars and trucks of all makes and sizes.

Product Features:

• Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
• Backed by Motorcraft’s Service Parts Warranty
• Exact fit for Ford, Lincoln and Mercury vehicles
• Resistant to oxidation and arc erosion.
• Multi-rib insulator protects against misfire.
• Service intervals of up to 100,000 miles.
• Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
• Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
• Motorcraft ignition components help prevent false check engine lights.

Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:

• Works to optimize engine performance for a longer life and improved fuel economy
• OE design
• Full-platinum tips; platinum on both the center and side electrodes to promote reduced gap wear
• Platinum ball welding process provides a consistent point of contact for enhanced adhesion

Autolite Iridium Ultra Laser Finewire Spark Plugs are one of our brand’s most technologically advanced products. These spark plugs provide superior durability, more focused ignition with better overall ignitability for optimum performance. Autolite Spark Plugs are the best alternative to OE spark plugs, offering OE fit form and function supporting all foreign and domestic makes and models at a value price. Autolite provides the automotive aftermarket and original equipment manufacturers with the highest quality ignition products and is the leading supplier of spark plugs in the world.

Product Features:

• Autolite Iridium Ultra is an engineered OE replacement iridium spark plug.
• A laser-welded 0.5mm pure iridium finewire center electrode provides optimal fuel efficiency, acceleration and focused ignitability.
• Nickel-plated shell to resist corrosion.
• High-alumina ceramic insulator for increased strength.
• Laser welded 0.5mm Iridium finewire center electrode.
• Proprietary platinum sidewire technology.

Pulstar Spark Plugs use innovative plasma-assisted combustion technology to increase horsepower and torque. Plasma-assisted combustion is already used to improve engine performance in race cars, but requires complex control systems and costs nearly $2,000 per cylinder. Pulstar Spark Plugs, manufactured by Enerpulse Technologies, brings plasma-assisted combustion to consumers with a simple spark plug upgrade. Pulstar uses a patented internal capacitor, developed with the help of a US DoE laboratory, to create a high-intensity electrical pulse that ionizes the air-fuel mixture and saturates it with combustion-enhancing plasma. With its plasma-assisted combustion, Pulstar ignites fuel instantly and burns it rapidly; gaining up to 7 horsepower, 9 ft.-lbs. of torque … and, delivering wicked throttle response.