from

$295.99

Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
Designed to meet or exceed all OEM specifications in fit, form & function
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$13.99

Product Features:

The Edelbrock Accelerator Pump Diaphragm 30cc Gasoline #12400 for 4150 Carburetors Proper installation is the responsibility of the installer.
Improper installation will void your warranty and may result in poor performance and engine or vehicle damage

from

$43.99

The Edelbrock #12403 Accelerator Pump Cam Kit Assortment Package of 8. These accelerator pump cams will have different shapes and profiles, allowing you to fine tune the accelerator pump’s performance to the engine’s requirements. Cam “lift” will directly

Product Features:

Multi-Color
Plastic Material
Fits Holley® 2300, 4150, And 4160 Carburetors
Set of 8
Made In The USA

from

$36.99

The carburetor is a device used to mix air and vaporized fuel for combustion in old school engine applications. The last year for carburetors in motor vehicles used on the road in the U.S. is listed as 1994. The carburetor was typically a down draft style device where oxygen was drawn from the top of the carburetor pulled in by the engine vacuum through a venturi style opening, just above the venturi were jets, or metered openings where fuel was pulled from a bowl of fuel within the carburetor.

Product Features:

Application matched components ensure carburetor can be returned to like new condition.

from

$14.29

Our Intake Manifold Bolt are suitable for a range of applications. Maximum gasket performance is achieved when using new manifold hardware.

Product Features:

Direct replacement – this engine intake manifold bolt matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$122.99

GM Genuine Parts Fuel Injection Throttle Body Repair Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$44.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$14.99

The Edelbrock 94 #12459 Carburetor Jets .059″Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.

Product Features:

59 Maximum Jet Size
0.058 in. Orifice Diameter
1/14-32 in. Thread Size
Standard Main Jet Type
Set of 2

from

$46.99

Stamped from 18 gauge steel. Triple-chrome plated. High quality finish. Great looks. Works with all 5.152 inch carburetors. Base knock-outs for use with crankcase ventilation.

Product Features:

Stamped From 18-Gauge Steel
Triple-Chrome Plated
High-Quality Finish
Great Looks
Works With All 5.125 in. Carbs
Base Knock-Outs For Use w/Crankcase Ventilation

from

$6.79

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$17.99

These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

Product Features:

Grade 5 socket head bolts are zinc plated for protection and appearance
Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
Washers Included

from

$4.29

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$195.99

REPLACEMENT MAIN BODY KIT FOR 0-80457S

from

$14.99

The Edelbrock #12605 Hardware Kit will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 45

Product Features:

Fits Holley® Carburetors With Center Hung Fuel Bowl
Includes Adjusting Nut
Includes Locking Screw
Includes O-Ring
Includes Washers

from

$66.99

Product Features:

Customize Carburetor Calibration and Performance
Owners Manual has Assembly Help
Includes Metering Rod Retaining Spring
Includes Metering Rods
Includes Metering Jets
Includes Step-Up Springs

from

$595.99

Edelbrock part #21011 Performer intake manifold is designed for street 1955-86 small-block Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle respons

from

$30.99

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$22.99

Edelbrock part #12415 Fuel Bowl Inverted Flare Fitting is a 3/8″ inverted flare fuel inlet fitting. The fitting is designed for use with Holley 2300, 4150, 4150HP and 4160 (center hung floats only), 4500, 4500HP and Rochester Quadrajet applications up to

Product Features:

Brass Material
3/8 in. Single Barb
7/8-20 in. Male End
5/8-18 in. Female Flare
With 3/8 in. Tube

from

$480.99

The Street HP uses the best features from Holley’s race Bred 4150 HP carbs, but tamed for street and light competition use. The contoured main body from the 4150 HP has a tumble polished shiny finish. The metering system includes a timed spark port for a

Product Features:

Vibratory Polished Alum Good Looks/Weight Savings/Lasting Shine
Performance Upgrade For Stock To Mildly Modified Vehicles
Universal Calibration For Easy Bolt-On Performance
Man. Choke Cable Hand Controlled For Cold Start Control
Vacuum Secondaries For Use On Wide Variety Of Vehicles
Single Feed Fuel Inlet For Easy Installation

from

$20.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$20.99

The Edelbrock #12370 comes with fuel bowl and metering block gaskets. The Edelbrock #12370 is designed to be used with Holley 2300, 4150, 4160, 4165, and some 4500 carburetors.

Product Features:

Nitrile Rubber Material
Metering Block, Fuel Bowl Type
Set of 4
Fits Holley® 2300, 4150, 4160, 4165, And Some 4500 Carburetors
Made In The USA

from

$22.99

The Edelbrock #12605 Non-Adjustable Inlet Needle and Seat assembly will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 23

Product Features:

Center Hung Floats
0.11 in. Needle Diameter
Viton® Needle Material
Sold Individually
Non-Adjustable Type

from

$196.99

The Edelbrock part #1033 Progressive Linkage Kit is designed to smooth throttle response, eliminate flat spots and improve fuel economy. It achieves this by only opening the center carburetor at less than 50% (or 33%) pedal travel thus sharpening the vent

Product Features:

Steel Material
Zinc Plated
Adjustable
3-Barrel Configuration
Made In The USA

from

$27.99

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$38.99

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.