Buick Regal Valve Cover and Cylinder Heads

This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Product Features:

• DESIGNED FOR THE TOUGHEST CONDITIONS – Engineered for hardworking vehicles that operate in severe conditions
• STRONG AND DURABLE – Severe duty steel core gaskets designed slightly thicker to accommodate for machined surfaces
• PREMIUM MATERIALS – High-grade stainless armor enhances strength and corrosion resistance while proprietary coatings enhance sealing and anti-stick properties
• SUPERIOR SEAL – Precise embossed Printo seal sealing beads at all vital areas to eliminate leak paths
• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.

Product Features:

• Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
• Nominally Rated At 200,000 Psi Tensile Strength
• These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
• Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Validated for fit, form and function
• Unsurpassed quality you can trust

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• 1.66 in.
• Ductile Iron Material
• Exhaust
• Sold Individually
• Made In The USA

This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.

Product Features:

• Direct replacement – this valve cover matches the original equipment part for fit and function
• Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
• Cost-effective solution – offers original equipment performance at competitive price
• Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

Product Features:

• Not For Center Bolt Covers
• Steel Material
• For Small-Block Chevy
• Chrome Finish
• Set of 4

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
• SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
• NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
• STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

Designed to keep the rocker arms positively locked for precise and critical valve train adjustments. Manufactured from quality grade steel, then heat-treated for extra strength and plated with a durable finish. Kits include 16 rocker arm nuts with socket head set screws and one hex key wrench.

Product Features:

• (16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
• Shank O.D. .540″
• Includes Locks and Hex Wrench
• High-Quality Grade Steel
• Heat-Treated For Ex Strength
• Plated With Durable Gold Tone Finish

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Unsurpassed quality that you can trust
• Uses leading edge materials
• State-of-the-art manufacturing
• Exacting tolerances
• Meets or exceeds OEM specifications

Product Features:

• Use W/ Valve Springs Part #5797, 5845, 5712
• Use W/ Locks Part #9611
• 1.50 in. Outside Diameter
• Steel Material
• Black Oxide Finish

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma Loc(TM) adjusters.

Product Features:

• Made Of 8740 Chrome Moly Forgings
• Heat Treated To 180,000 PSI
• Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
• Lengths Are Exact Designed To Provide Positive Seating Every Time
• Set of 16
• .800″ Adjuster Thread Length
• 3/8-24 Shank Diameter and Thread
• 3/8″ Typical Small Block Application

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Replacement Lifters For Performer Cam
• 50 State Legal

Sealed Power Vintage parts provide coverage for applications over 35 years old, restoring classics with like-new performance. Leading-edge materials and ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.

Product Features:

• State-of-the-art manufacturing
• Exceptional material quality
• Exacting tolerances
• Heat treated tips
• Stock or mild modified replacement
• Made in USA

Spectre’s Engine Dress-Up Kit was designed for the ’58-’86 Chevrolet small block 265-400. This kit includes: stock height baffled covers, chrome T-bar hold downs, chrome PCV breather, chrome breather, chrome oil filler cap, grommets, and a stainless steel braided PCV hose with red/blue Magna-Clamps. Designed for use with OE specifications for fit and function, Spectre products are engineered to perform as good as they look.

Product Features:

• For Chevrolet small block 265 and 400
• Kit includes: stock height baffled covers, chrome T-bar hold downs, chrome PCV breather, chrome breather, chrome oil filler cap, grommets, and a stain
• Designed for use with OE specifications for fit and function
• Made from high quality material

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Validated for fit, form and function
• Unsurpassed quality you can trust

ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best. 

Product Features:

• 1/2″ 12-Point, 3/16″ Allen Socket Size(s)
• 8740 Chromoly
• Black Oxide
• Small Block Chevy
• Sold As A Kit

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

• All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
• All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
• All threads and machined surfaces are and repaired with technology that exceeds the original metal
• Non-sealing iron surfaces painted to prevent oxidization

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Head installation set
• Meets or exceeds all original equipment specifications
• Engineered and manufactured specifically for the aftermarket repair environment
• Premium quality parts
• Unsurpassed quality you can trust
• Unsurpassed quality you can trust

Sealed Power« Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.

Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights

Product Features:

• For simplicity, any Super Lock fits any COMP Cams 10° retainer – just choose the correct lock for you valve size and application
• Super Locks are recommended in all race applications

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Unsurpassed quality that you can trust
• Uses leading edge materials
• State-of-the-art manufacturing
• Exacting tolerances
• Meets or exceeds OEM specifications