Buick Invicta Brake Parts
Top Buick Invicta Brake Parts Categories
We carry over 17 Brake Parts in inventory for the Buick Invicta. If you’re looking for aftermarket Brake Parts for your Buick Invicta, check out all these categories:
Essential Buick Invicta Brake Parts
Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)
from
$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.
Product Features:
See More
Product Features:
- Each unit is 100% new, providing consistent performance when servicing your brake system
- Easy to transfer for on-the-spot master cylinder bleeding
- Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
- Easy to clean to ensure no cross contamination
- Durability for long lasting performance
Wearever – Remanufactured Brake Master Cylinder (Part No.10-49201)
from
$32.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
Carquest Wearever – Brake Shoes (Part No.S340)
from
$32.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.
Product Features:
See More
Product Features:
- Wearever Brake Shoes come bonded or riveted based on OE design.
- Wearever Brake Shoes are coated to prevent rust.
- Wearever Brake Shoes are 100% New not remanufactured.
- Brand may vary by location
Carquest Wearever – Brake Shoes (Part No.S197)
from
$41.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.
Product Features:
See More
Product Features:
- Wearever Brake Shoes come bonded or riveted based on OE design.
- Wearever Brake Shoes are coated to prevent rust.
- Wearever Brake Shoes are 100% New not remanufactured.
- Brand may vary by location
Carquest Wearever – Brake Hose Assembly (Part No.BHA35009)
from
$27.99
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
Product Features:
See More
Product Features:
- Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured – materials tested to exacting government-regulated safety and durability standards
- Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA53540)
from
$18.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
Carquest Wearever – Brake Hydraulic Hose (Part No.BHA8553)
from
$33.99
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
Product Features:
See More
Product Features:
- Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured – materials tested to exacting government-regulated safety and durability standards
- Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
Carquest Wearever – BRAKE HOSE (Part No.BHA36005)
from
$30.99
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
Product Features:
See More
Product Features:
- Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured – materials tested to exacting government-regulated safety and durability standards
- Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
- Brand may vary by location
Carquest Wearever – WHEEL CYLINDER (Part No.WCA37018)
from
$41.49
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.
Product Features:
See More
Product Features:
- Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
- Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
- Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
- Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
Carquest Wearever – WHEEL CYLINDER (Part No.WCA37017)
from
$41.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.
Product Features:
See More
Product Features:
- Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
- Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
- Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
- Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
Carquest Wearever – Wheel Cylinder (Part No.WCA13388)
from
$16.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.
Product Features:
See More
Product Features:
- Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
- Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
- Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
- Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
Carquest Wearever – Wheel Cylinder (Part No.WCA13387)
from
$16.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.
Product Features:
See More
Product Features:
- Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
- Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
- Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
- Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA14494)
from
$24.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.
Product Features:
See More
Product Features:
- Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
- Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
- Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
- Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
Carquest Wearever – Wheel Cylinder Kit (Part No.WCKA3600)
from
$8.49
The components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – the components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles
- Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Wearever – Drum Brake Wheel Cylinder Repair Kit (Part No.WCKA13620)
from
$6.49
The components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – the components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles
- Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Pik-a-Nut – Spindle Nut Kit, 3/4-20 Contents: Nut, Washer And Cotter Pin (Part No.304993.1)
from
$5.49
This spindle lock nut kit includes a new spindle nut and the necessary hardware designed to match the factory equipment.
Product Features:
See More
Product Features:
- Direct replacement – this spindle lock nut kit includes a nut and related, necessary hardware for servicing specific vehicles
- Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to wear
- Durable construction – kit components are manufactured to precise specifications to ensure proper fit and reliable service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Buick Invicta Brake Parts Categories
Helping You Find the Right Brake Parts for Your Buick Invicta
You love your Invicta. So we’ve made it easier than ever to help you find Buick Invicta Brake Parts in our online catalog. Our inventory holds 17 aftermarket and OEM Brake Parts for your Buick Invicta, ranging from $5.49 to $41.99.
We offer parts from 4 brands trusted to make quality Brake Parts for your Buick Invicta. Before you buy, take some time to read through customer reviews. We currently have 280 reviews of Buick Invicta Brake Parts from previous customers. Some of the top rated parts include Brake Shoes with 1.0 stars and Brake Shoes with 1.0 stars.
Find your Invicta Brake Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Buick Invicta part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Brake Parts Brands for Your Buick Invicta
Our inventory holds Brake Parts for your Buick Invicta from 4 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest, Cardone, and Dorman, all of which can keep that Buick happy.
We have Dorman – Pik-a-Nut parts available for your Buick Invicta in categories like Brake Kits. Some of the top-rated Dorman – Pik-a-Nut parts in these categories are:
Top-Rated Carquest Wearever Brake Parts
Leading Carquest Wearever Brake Parts
We carry Carquest Wearever brand parts for your Buick Invicta across several catalog categories, including Wheel Cylinders. Some of our most reviewed Carquest Wearever parts include:
FAQs for Buick Invicta Brake Parts
What are the most purchased Brake Parts for the Buick Invicta?
Out of 17 Brake Parts for the Buick Invicta, the most popular in our inventory are:
What are the top-rated Buick Invicta Brake Parts?
Top-rated Brake Parts for your Buick Invicta based on customer reviews/ratings are:
from
$41.99
(2)
Brake Shoes
“pulled my shoes off of rear (1955 Buick) spent too much time trying to install these new ones….they are too deep, at quick glance, they match – but ”
from
$32.99
(1)
Brake Shoes
“I could not believe it when I saw that the brake linings on these shoes are glued to the backing plates, not riveted. I immediately returned them to m”
