BMW X6 Drivetrains

Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON, GM DEXRON-II and DEXRON-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III, Toyota/Lexus Type T, T-III and T-IV, Honda/Acura ATF-Z1 (except in CVTs), Mercedes Benz NAG1, Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:

• Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool
• Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.

Product Features:

• Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
• Comes with the OE grease
• Boot manufactured with highest quality materials to prevent cracking, wear and leaking
• Matches original equipment design specifications

Rein Aluminum Magnetic Differential Oil Drain Plugs are upgraded drain plugs to the OE design that include a captive magnet. To protect your investment, Rein Magnetic Differential Oil Drain Plugs act as a quick additional point of inspection for internal wear during an oil change. The captive magnet is made of rare earth metals and is used to attract metal wear particles that may be floating in the differential. By holding onto these metal particles, it gives an insight into the health of your differential while preventing the particles from being recirculated and causing more damage.

Product Features:

• Designed and constructed to strict engineering quality standards to ensure proper sealing.
• Plug with a flush-style magnet designed as an upgrade to the OE.

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

• PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
• SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
• OE-STYLE DESIGN – Engineered to meet OE specifications
• COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Rein Automotive OE quality transfer case actuators are made to factory specifications ensuring proper fit, form and function. The transfer case actuator is a small motor attached to the case that proportions engine power to the front and rear differentials. High quality electronics and nylon gears are used to ensure a long service life. Our quality transfer case actuators aim to provide the professional repair technician and vehicle owner the peace of mind and trust that is expected from an OE quality component.

Product Features:

• Rein OE Quality Transfer Case Actuators are the perfect replacement to meet the high demands placed on 4WD/AWD systems.
• Direct OE replacement including mounting hardware.
• Designed to engage or disengage the four wheel drive system as selected by the ECU of the vehicle.
• Made using high quality materials.
• Restores functionality of 4WD/AWD system.

Product Features:

• Brand may vary by location

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

• Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
• 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
• Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
• Serviceable construction – non-staked universal joints are designed for future serviceability

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

• Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
• 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
• Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
• Serviceable construction – non-staked universal joints are designed for future serviceability

The Febi Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium aftermarket replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
• Excellent high temperature capabilities
• Compatible with wide range of fluids
• Delivers quality and reliable performance for every type of repair

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• BUILT TO LAST — Advanced heat treatment process for strength
• PREMIUM MATERIALS — Precision manufactured using premium-grade steel for lasting performance and extended bearing life
• RELIABLE PERFORMANCE — Element size and quantity are engineered to meet or exceed the load rating of OE bearings
• COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Drive Shaft Support Bearing

Product Features:

• Carquest CV Axle’s are made from the finest materials using premium steel, boot, and grease. Carquest CV Axles are designed to exceed the original equipment specifications for a trouble free ride.
• High moly CV joint grease with stainless-steel boot bands

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• 100% new axle and components
• New axle nut or attaching hardware included when applicable
• Bearings, races and housings are heat-treated for longer life
• Precision-engineered seal mating surfaces for leak-free performance
• High moly CV joint grease with stainless-steel boot bands

This drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles
• Restores functionality – reliable replacement for an original coupler that has failed due to wear or damaged due to collision
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles
• Restores functionality – reliable replacement for an original coupler that has failed due to wear or damaged due to collision
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Product Features:

• Brand may vary by location

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool

This transfer case motor gear is designed to match the fit and function of the original gear on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this transfer case motor gear is designed to match the fit and function of the original gear on specified vehicles
• Restores functionality – reliable replacement for an original part that has failed due to gear stripping
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience