BMW X3 Drivetrains

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to BMW 04-10;. Please verify your application.

Product Features:

• MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
• HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
• READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
• For Years: 2004-2010
• Weight approx: 1 Lbs
• BEARING ID / BORE: 1.1811 INCH / 30 MM
• CENTERLINE: 2.00 INCH / 51 MM
• MOUNT WIDTH: 6.30 INCH / 160 MM

Driveshaft Flex Join

Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:

• Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
• Formulated to help prevent gear wear and protect against rust and corrosion
• Formulated to deliver enhanced protection against deposits
• Helps provide better protection during extreme operating conditions

Transfer Case Motor

Pinion Seal

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool
• Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

Differential Side Cover Seal, 90 x 44 x 10

Application-Specific Engineering Design to ensure the correct fit, function and high performance of the wheel bearing. BCA supplies premium replacement bearings that meet or exceed the OE specifications. Premium Quality Materials are used for forged steel rings, seals, precision cages, rolling elements and premium grease, to ensure that our customers receive a robust, durable product. Seals are customized for each BCA hub based on application-specific materials & design requirements to minimize the chance of contamination and maximize bearing life. Precision Cage on BCA bearings are designed to keep the rolling elements of the bearing spaced correctly. The cages undergo design verification and production validation testing to ensure high quality. Pre-Lubrication of all BCA wheel bearings with premium grease for your convenience. This is a major advantage so you do not have to worry about grease or seal application.

Product Features:

• For wheel bearings, BCA utilizes Forged Steel in the inner and outer rings that meets our stringent steel quality specifications to optimize bearing life.
• For taper bearings, BCA utilizes Case Carburized Steel for heavy duty shock loads & longer life.

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Controlled heat treating process for lasting performance and extended bearing life
• Industry leading coverage
• Professional technicians know they can depend on National

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool
• Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Controlled heat treating process for lasting performance and extended bearing life
• Industry leading coverage
• Professional technicians know they can depend on National

GKN Drivetech (Lobro) manufactures a replacement Axle Assembly that is optimized for weight, noise, vibration, harshness (NVH), steering and suspension performance.

Product Features:

• OEM Quality and a Direct fit Replacement
• Provides exceptional reliability.
• Improved space utilization through power unit and gearbox repackaging potential.
• Lighter weight provides improved fuel efficiency.
• Better driving characteristics and comfort
• Optimum power delivery for peak vehicles

With Clamps and Grease The Febi CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium aftermarket replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle.
• Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue.
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot.

Product Features:

• For every specific application a boot kit to the OES standard
• Reliable protection against damp and dirt
• Optimum sealing and abrasion resistance
• Manufactured according to DIN EN ISO 9001:2000

Product Features:

• Brand may vary by location

You can expect original quality and a first-to-market range from Freudenberg, the inventor and the world’s leading Original Equipment manufacturer of radial shaft seals. As the aftermarket distribution arm of Freudenberg Group – the designer and OEM manufacturer of the Simmerrings – Corteco draws on the material and manufacturing expertise of its parent company and is able to deliver products with outstanding OE quality, distinguished by the high durability of their sealing properties. A new generation of innovative seals that help to reduce friction and fuel consumption is also available.

Product Features:

• Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
• The flanged design allows for easier and proper installation and helps avoid cocking.
• The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
• Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.

Restore a smooth ride and easy acceleration with Dorman’s Driveshaft Coupler. Engineered from high-quality rubber for long-lasting service, it effectively absorbs and reduces vibration between the driveshaft and transmission or transfer case. Plus, depending on the application, all installation hardware is included for a complete repair.

Product Features:

• Direct replacement and direct fit Drive Shaft Couplers available (where applicable) for ease of replacement
• Comes with bolts and washers (where applicable)
• Easy to install
• Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards

This transfer case motor gear is designed to match the fit and function of the original gear on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this transfer case motor gear is designed to match the fit and function of the original gear on specified vehicles.
• Restores functionality – reliable replacement for an original part that has failed due to gear stripping.
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

DIFFERENTIAL DRAIN P

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints..

Product Features:

• Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
• 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
• Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
• Serviceable construction – non-staked universal joints are designed for future serviceability

The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:

• Rear Driveshaft Assembly.
• Rear Drive Shaft: OE Fix.
• Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
• Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance

Input Shaft Seal

Input Shaft Seal