BMW 850CSi Cooling and Climate Controls

Choosing from the comprehensive VIEROL product range means opting for outstanding quality. This is confirmed by the Q+ quality seal for parts in OEM quality MADE IN GERMANY. VIEROL AG is a leading automotive parts distributor located in Oldenburg, Germany. With the trademarks VAICO and VEMO are the service market leaders in more than 125 countries worldwide. As an internationally present automotive supplier, VIEROL AG specializes in electronic and electrical components for German and European vehicles. VIEROL AG quality brands VEMO and VAICO combine innovation and experience, technical expertise and practiced corporate values, commitment to precision and a passion for technology: the invisible, but unquestionable, optimal prerequisites for guaranteed product quality and globally recognized service. Choosing from the comprehensive VIEROL product range means opting for outstanding quality.

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

• 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
• Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
• Brass sensor housing precision machined to meet or exceed OE thermal conductivity
• OE precision matched thermistor position for correct output parameters
• Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

This premium water pump uses new high-quality components and is designed to meet or exceed OE specifications. This pump is 100% tested to ensure quality. Bearings, gaskets, seals, impeller, hub and housing are all designed for long-lasting service life. All necessary gaskets and seals are included.

Product Features:

• This pump is used on accessory belt driven applications
• Used mostly on models equipped with a fan clutch
• It is highly recommended that the fan clutch be replaced with the water pump
• All gaskets or seals necessary for installation are supplied with pump
• Durable housing features precisely machined mounting surfaces for proper sealing

The VDO brand product category offers OE quality blower motors, engine cooling fan motors and complete cooling fan assemblies. Professional technicians and DIYers alike want the highest quality products for ease of installation, fit, form, and performance. Thats exactly what they get with all of the VDO HVAC blower motors, engine cooling fan motors, and cooling fan assemblies. And, with VDO, every part number is application-specific to provide OE fit and performance. VDO electric motors are built in ISO/TS certified facilities and manufactured to the same quality standards as motors VDO supply to global OE automakers worldwide. They offer quiet operation, dependable performance, and competitive pricing. VDO exclusive Dual Bearing design technology provides quieter, efficient motor operation. Utilizing two ball bearings, bearing retainers, and riveted magnets. VDO motors set the standard for motor design and technology. VDO products are designed for specific vehicle fit, form, and function providing quiet dependable operation and longer service life. Precision assembled and balanced with all new components for vibration free operation. OE design and technology insures ease of installation right out of the box. Manufactured in ISO and TS certified facilities and tested to OEM specifications.

Product Features:

• OE quality
• Quiet operation and dependable performance
• Dual Bearing design technology
• Vibration free operation
• Precision assembled and balanced with all new components
• Tested to OEM specifications

Coolant Bleed Screw

High quality OE replacement part with all components needed to complete the job

Product Features:

• All the seals needed to complete the job
• Compatible with both R12 and R134a refrigerants
• Application specific
• SUV and rear air applications

CARQUEST New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. CARQUEST New Compressors are designed to pump the air conditioning refrigerant through the air conditioning system to provide exceptional climate control for the passenger compartment.

Product Features:

• New, with Clutch, with 10PA17C Compressor
• Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
• New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
• The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
• All new compressors must pass a helium leak test and pump up function test prior to packaging.
• O-Rings and gaskets necessary for installation are included.

Radiator Mount

Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

Product Features:

• Maintains proper cooling system pressure
• Easy installation and removal
• 100% tested to ensure proper pressure and longevity
• Meets all OEM specifications

ACM Viscous Fan Drives offer the latest in engineering innovations, including fully modulating, cost-effective fan drives that control fan speed in direct proportion to engine cooling needs. ACM Viscous Fan Drives are the economical choice for efficiency, performance and quiet operation.

Product Features:

• Fan operates only when required and at appropriate speed – Allowing for improved efficiency and possible fuel and horsepower savings of up to 6-10% over fixed fans.
• Self-contained unit – No maintenance needed, nothing to service of maintain.
• Improved temperature control and smooth, soft fan engagement – Allowing for extended engine, belt and accessory component life.
• Bimetallic sensor – Senses heat exchanger air temperature for accurate fan engagement
• No external controls required – Simplicity of design for improved reliability

High quality OE replacement part with all components needed to complete the job

Product Features:

• All the seals needed to complete the job
• Compatible with both R12 and R134a refrigerants
• SUV and rear air applications
• Application specific

Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans

Product Features:

• Economy adjustable thermostatic fan control
• Economy Model; 32-248°F
• For use with Imperial electric fans
• Probe installs into radiator fins

High quality OE replacement part with all components needed to complete the job

Product Features:

• All mounting hardware included
• Every coil tested for proper ohms
• Vehicle specific applications
• Coated to prevent corrosion

Radiator Mount

A/C Expansion Valve

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

• High grade stainless steel and copper construction
• Meets or exceeds OEM standards
• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated

Coolant Level Sensor

The APA/URO Fan Shroud is manufactured to OE specifications. The durable plastic construction prevents resists expansion and cracking.

Product Features:

• OE Quality
• Direct replacement for a proper fit every time
• Quality tested to ensure trouble-free installation and performance

The Vemo Engine Cooling Thermo-Fan Switch is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Corrosion resistant housings
• Nickel-plated or brass terminals for superior conductivity
• High-temp composite O.E.M.-type connectors designed to mate with vehicle wiring harness without modification
• Thermal switches matched to OEM temperatures to assure consistent performance

OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:

• Designed specially for high-torque and high vibration applications
• Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
• OEM specified
• Low-odor, non-corrosive formula
• Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

• Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
• Sensor-safe, non-corrosive, RTV silicone
• Protects against leaks caused by vibration and thermal expansion
• Meets performance specs of OE silicone gaskets
• Quickly returns vehicle to service in just 1 minute

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

• Thermal tested under real-life temperature simulations
• High tensile strength aluminum for maximum crimp strength
• Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
• Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
• Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
• OEM grade, premium fittings for transmission or engine oil coolers (where applicable)

Aluminum Core Radiator The Behr replacement radiator guarantees the same quality fit and performance as the OE radiator it replaces. The Behr radiator core is manufactured using high quality anti corrosive aluminum and fiber glass-reinforced polyamide coolant tanks that are highly resistant to cracking and deformation.

Product Features:

• OE-Equivalent
• Direct fit for easy installation.
• High quality corrosion resistant materials.
• OE Style mounting brackets and hose connections.
• Mechanically bonded aluminum core.
• Integrated transmission oil cooler when applicable.

This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:

• Direct replacement – this engine coolant reservoir matches the fit and function of the original part
• Ideal solution – engineered for a seamless installation
• Durable construction – manufactured from quality materials to withstand underhood heat and vibration
• Trustworthy design – backed by 100 years of automotive aftermarket experience

The Behr expansion tank is made of the highest quality materials and is engineered to meet or exceed the OEM specifications for performance, fit and durability.

Product Features:

• OE-Equivalent and Direct Fit for easy Installation.
• OE style connections and fittings.
• Made of highly durable materials.
• Resistant to thermal wear and cracking.