BMW 750i Belts and Hoses

The high quality VAICO Coolant Hoses protect the components in the water cooling circuit from corrosion. Thanks to the high-quality materials in accordance with OE, VAICO guarantees the best quality with an assortment of more than 1,000 Coolant Hoses. The Vaico line of cooling system hoses are designed to meet OE standards and are subjected to rigorous quality and performance tests.

Product Features:

• Quick, easy mounting: quick connector from German production
• All cooling-water hose inner linings are resistant to electrochemical cracking
• Material: according to OEM. (CR, AEM, HAT-ACM, FKM / VMO), fabric reinforcement Kevlar
• high strength and resistance to oil, mud, salt, road debris, and ozone
• Quality Assurance: Perform various tests, including endurance, cold fexibility and vacuum tests as well as leak and residue tests

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

• Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
• Engineered to help address noise issues caused by the belt drive 
• Capable of handling more extreme temperatures and workloads
• Made in the USA

Dayco ela (elastic) or stretch belts are specifically designed for two, three, and four point drives that are designed to use self-tensioning belts. Although these belts may look like standard poly rib belts, they are very different. These specially designed elastic belts have self-tensioning capabilities required by specific OE drives. Vehicles that are manufactured with stretch belts must replace them with stretch belts. These belts are not interchangeable with standard constructed belts of their same size. Dayco ela belts utilize a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt. The backbone behind the Dayco ela belt is its specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive. This belt construction incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. Stretch belts have unique installation instructions depending on the OE application. Installation may require a specialized tool for the application or a simple zip tie. Do not attempt to install by prying the belt on the pulleys. Dayco provides detailed instructions on the reverse side of the sleeve.

Product Features:

• Utilizes a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt
• Specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive
• Incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance
• These specially designed elastic belts have self-tensioning capabilities required by specific OE drives designed for a stretch belt

The high quality VAICO Coolant Hoses protect the components in the water cooling circuit from corrosion. Thanks to the high-quality materials in accordance with OE, VAICO guarantees the best quality with an assortment of more than 1,000 Coolant Hoses. The Vaico line of cooling system hoses are designed to meet OE standards and are subjected to rigorous quality and performance tests.

Product Features:

• Quick, easy mounting: quick connector from German production
• All cooling-water hose inner linings are resistant to electrochemical cracking
• Material: according to OEM. (CR, AEM, HAT-ACM, FKM / VMO), fabric reinforcement Kevlar
• high strength and resistance to oil, mud, salt, road debris, and ozone
• Quality Assurance: Perform various tests, including endurance, cold fexibility and vacuum tests as well as leak and residue tests

The high quality VAICO Coolant Hoses protect the components in the water cooling circuit from corrosion. Thanks to the high-quality materials in accordance with OE, VAICO guarantees the best quality with an assortment of more than 1,000 Coolant Hoses. The Vaico line of cooling system hoses are designed to meet OE standards and are subjected to rigorous quality and performance tests.

Product Features:

• Quick, easy mounting: quick connector from German production
• All cooling-water hose inner linings are resistant to electrochemical cracking
• Material: according to OEM. (CR, AEM, HAT-ACM, FKM / VMO), fabric reinforcement Kevlar
• high strength and resistance to oil, mud, salt, road debris, and ozone
• Quality Assurance: Perform various tests, including endurance, cold fexibility and vacuum tests as well as leak and residue tests

The INA Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:

• OE-Equivalent and a direct fit application.
• Precision bearing
• OE High quality pulley assembly
• Durable long life performance.

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

• Designed for the majority of automotive vehicle applications on the road today.
• High-quality materials help resist wear and improve belt life
• Features premium lubricated bearings to extend service life
• Meets or exceeds OE quality

Clamp – Hose

Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old quick connect fittings.

Product Features:

• Direct OE replacement for European cars
• Integrated thermoplastic couplings and O-ring seals
• Designed to go directly from the shelf to the vehicle. No cutting is ever needed
• All cooling-water hose inner linings are resistant to electrochemical cracking
• high strength and resistance to oil, mud, salt, road debris, and ozone
• Resistance to distilled water and water ethylene glycol mixtures
• Resistance to air temperatures of up to 135C

ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

• OE-Equivalent.
• Direct fit for easy installation.
• Resistant against wear, oil and heat.
• Temperature-stable from -22F to 176F (30C to 80C).
• Delivers over 98% power efficiency.
• High performance construction.
• Polychloroprene rubber cover and body.
• Polyester fiber tensile members and a ribbed belt design.

ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

• OE-Equivalent.
• Direct fit for easy installation.
• Resistant against wear, oil and heat.
• Temperature-stable from -22F to 176F (30C to 80C).
• Delivers over 98% power efficiency.
• High performance construction.
• Polychloroprene rubber cover and body.
• Polyester fiber tensile members and a ribbed belt design.

Water Pump O-Ring

Hose – Vacuum

This Litens belt tensioner is supplied by the original equipment (O.E.) tensioner supplier and meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). As with the original equipment part, this replacement tensioner is manufactured in Germany for BMW engine applications. The tensioner maintains the O.E. round spring technology as well as a heavy duty polymer pulley for optimum performance and durability. To assist with belt removal and installation, this tensioner is equipped with a lift feature and pin that holds the tensioner open during belt routing. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:

• Manufactured by the original equipment part supplier to ensure proper form, fit and performance
• Exposed “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
• Installation instructions included.
• Heavy Duty Polymer Pulley with cap
• Professional Mechanics will change this tensioner in about 1 hour
• Due to the fact that belts and tensioners have similar Original Equipment “design life targets”, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore, d

The INA Accessory Belt Tensioner Assembly is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

• OE-Equivalent and a direct fit application
• High quality precision spring tension assembly
• OE specified bearing and pulley assembly
• Durable long life performance

Expansion Tank Hose

Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old quick connect fittings.

Product Features:

• Direct OE replacement for European cars
• Integrated thermoplastic couplings and O-ring seals
• Designed to go directly from the shelf to the vehicle. No cutting is ever needed
• All cooling-water hose inner linings are resistant to electrochemical cracking
• high strength and resistance to oil, mud, salt, road debris, and ozone
• Resistance to distilled water and water ethylene glycol mixtures
• Resistance to air temperatures of up to 135C

The high quality VAICO Coolant Hoses protect the components in the water cooling circuit from corrosion. Thanks to the high-quality materials in accordance with OE, VAICO guarantees the best quality with an assortment of more than 1,000 Coolant Hoses. The Vaico line of cooling system hoses are designed to meet OE standards and are subjected to rigorous quality and performance tests.

Product Features:

• Quick, easy mounting: quick connector from German production
• All cooling-water hose inner linings are resistant to electrochemical cracking
• Material: according to OEM. (CR, AEM, HAT-ACM, FKM / VMO), fabric reinforcement Kevlar
• high strength and resistance to oil, mud, salt, road debris, and ozone
• Quality Assurance: Perform various tests, including endurance, cold fexibility and vacuum tests as well as leak and residue tests

Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old “quick connect” fittings.

Product Features:

• Direct OE replacement for European cars
• Integrated thermoplastic couplings and O-ring seals
• Designed to go directly from the shelf to the vehicle. No cutting is ever needed
• All cooling-water hose inner linings are resistant to electrochemical cracking
• high strength and resistance to oil, mud, salt, road debris, and ozone
• Resistance to distilled water and water ethylene glycol mixtures
• Resistance to air temperatures of up to 135C

Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:

• Reduces installation time.
• No cutting, refitting or adjusting the hose.
• Prevents leaks and comebacks from reusing old quick connectors and o-rings.
• Resistant to heat, salt, road debris, oil and other contaminants.

Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:

• Reduces installation time.
• No cutting, refitting or adjusting the hose.
• Prevents leaks and comebacks from reusing old quick connectors and o-rings.
• Resistant to heat, salt, road debris, oil and other contaminants.