BMW 735iL Engine Parts

Timing Guide Rail

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

• 100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
• Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
• Thermoplastic housing withstands heat stress for enhanced durability
• Internal core made from grain oriented electrical steel limits loss factor within magnetic circuit to reduce heat and ensure coil endurance
• Neodymium magnet produces max high voltage output at all speeds

Freeze Plug

Glyco advanced engine bearing technologies withstand heavy loads and cope with the increasingly challenging conditions of modern, environmentally-friendly engines. Glyco is the world’s largest manufacturer of OE-quality bearings. Every year, our engine bearings are fitted on more than 10 million engines around the world – from small bore engines to heavy-duty commercial vehicles and stationary engines. Driven by the need to reduce CO2 emissions, today’s engines extract more power from less fuel. Due to the increased temperature and load, conventional bearings struggle to cope. Thanks to over 100 years of innovation, Glyco provides bearings with advanced metallurgy that can withstand these challenges. Federal-Mogul invented Glyco Sputter Bearings with twice the service life of conventional bearings. Glyco developed G-188, the first intelligent bearing material, and were also first to launch a full lead-free material portfolio. Recent innovations include the highly durable Glyco IROX bearing shells, which address the challenges of hybrid, stop-start and downsized engines.

Product Features:

• Original Equipment Quality
• Excellent wear resistance
• Low propensity to seize
• Reduction in Friction

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool
• Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

Valve Adjust Eccentr

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
• SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
• EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
• REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

Dorman’s Engine Oil Drain Plug Gaskets are conveniently available in packs of varying quantities. Many styles are offered, including Copper, Aluminum, Nylon, Metal/Rubber, Inset, Fiber and Crush gaskets. Replacement is recommended at every oil change. Oil filter caps are available separately.

Product Features:

• Direct replacement gaskets and some universal gaskets available. Proper fit with the drain plug ensures a tight seal.
• Gaskets are also included with many of Dorman’s Engine Oil Drain Plugs and Pans
• Made to specific sizes and standards to ensure a proper fit
• Designed and constructed to strict engineering quality standards

CORTECO powertrain/chassis mounts and bushings are designed to the highest quality standards and manufactured using leading-edge technology. As a specialist for the independent aftermarket, Corteco offers a wide selection of OEM quality vibration control spare parts from Vibracoustic. As a wholly owned subsidiary of Freudenberg, Vibracoustic is the world’s leading technology specialist for vibration control modules and components for the international automotive industry. New to the Corteco product range is a very light-weight engine mount, which shows the full innovative power of Vibracoustic. Reducing the weight of the mount makes it possible to optimize vibration control and reduce the weight. In addition, thermal separation ensures that no heat energy is transmitted to the mount, resulting in a considerable extension of service life. A cost advantage also comes from innovative manufacturing methods. Corteco now offers this engine mount as a spare part for a variety of BMW models.

Product Features:

• OE-Equivalent and a direct fit application.
• Meets or exceeds the OE specifications.
• Designed to reduce engine vibration and noise Vibration Control Brochure

Oil Cooler Seal

Goetze OE piston rings for gasoline and diesel engines, are developed for automobile, light commercial vehicle and heavy-duty applications, come in a wide range of sizes, include the first ring sets introduced for Euro4-compliant engines. The end gap can be a straight cut, angled cut or gas tight type for improved sealing. Radial pressure distribution greatly influences ring performance therefore we modify the pressure distribution according to the individual application. The wear-resistance and running-in behavior of the outer ring surface is defined by selecting from various coating options, which include the high-performance electroplated, thermally sprayed and PVD coatings. Goetze modern oil control rings scrape off oil from the cylinder wall, leaving just the required amount for lubrication. The running surface is the contour of the ring facing the cylinder surface. The objective of this running surface profile is to create a lubrication slot with a hydrodynamic film which the piston ring can slide on without touching the other surface. An optimized asymmetrical-barrelled running surface ensures low lubricant consumption even after a very long running time. Goetze piston rings have anti-scuffing properties that promote smooth engine operation, reduced oil consumption and long engine life. In addition, the Goetze process helps prevent materials from detaching and cracking and aids in environmental protection

Product Features:

• Maximum durability
• High wear and corrosion resistance
• Excellent heat-conducting capacity
• Optimal fit

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including thermal shock and vibration, with unparalleled reliability, durability, and accuracy.

Product Features:

• Products are produced in ISO 14001 and IATF 16949 certified facilities to ensure the highest quality and consistency throughout the production process.
• Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
• Manufactured in an anti-static environment to ensure reliability and stability.
• Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
• Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

Oil Pan Gasket

Valve Cover Nut

Valve Adjust Nut

Rocker Arm

Timing Chain

Valve Adjust Bolt

The Febi Oil FIller cap is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium aftermarket replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

Metaloflex Cylinder-head Gaskets Elring cylinder-head gaskets are high-tech components used in modern combustion engines. As key components, they help to ensure that engines run efficiently, reliably and economically. Developed by ElringKlinger, Metaloflex is a globally recognized brand of innovative metal layer cylinder-head gaskets made of beaded, elastomer-coated spring steel layers. Multilayer steel cylinder-head gaskets are available in various bead designs and with a different number of layers, depending on the OE specification of the respective car manufacturer. Metaloflex gaskets may be of single or multi-layer design depending on the application. Thanks to the modular design elements, this sealing system can be individually adapted to suit the requirements of the specific engine. This technology avoids the need for time-consuming, costly iterative processes whilst guaranteeing maximum engine design flexibility.

Product Features:

• Produced from spring steel for long-lasting flexibility of beads
• Thermal stability up to 600F
• Full or partial FPM surface coverage of head and block layer for micro-sealing of liquids and combustion gas – extended service life
• Heat treatment of functional layers further enhances gasket durability and this technology is exclusively applied to ElringKlinger metal gaskets
• Tightening instructions provided with each gasket for perfect results

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts

AJUSA is a leading global manufacturer of automotive gaskets, head bolt sets, seals and hydraulic lifters for European and Asian vehicles. AJUSA prides itself in offering the latest applications with quality that is equal to or exceeds that of the OE. Headquartered in Spain, AJUSA was established in 1972 as a gasket manufacturer, is an OE supplier, is ISO 9001 and ISO/TS 16949 certified, and ISO 14001 certified as a company that protects and respects the environment.

Product Features:

• AJUSA cylinder head bolts meet or exceed OE manufacturer specifications and are a perfect complement to AJUSA head sets and AJUSA head gaskets.
• All kits are application specific.
• Each set contains all the head bolts needed to complete the repair. V & H engines require 2 sets for a repair.
• Each set comes with special assembly lube to ensure proper torque when tightening.
• All kits are boxed and shrink wrapped.

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

• 100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
• Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
• Thermoplastic housing withstands heat stress for enhanced durability
• Internal core made from grain oriented electrical steel limits loss factor within magnetic circuit to reduce heat and ensure coil endurance
• External core made from oriented silicon steel ensures durability and longevity

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location