Name: Remanufactured Rack and Pinion Assembly
Brand: Cardone
SKU: 26-2812
Price: 649.99 USD

from

$649.99

CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$39.99

Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.

Product Features:

Produced with high quality materials to ensure maximum life and a smooth ride
Manufactured to strict engineering standards/specifications in materials and tolerances
Part has a high corrosion resistance for maximum life
Matches original equipment design specifications

from

$99.31

FEBI Tie rod assemblies strictly comply with the specification of the manufacturers providing; quality, performance and exact fitment. The FEBI tie rod assembly ensures a comfortable driving experience and to prevent high-frequency vibrations being transferred to other parts.

Product Features:

Original Equipment Manufacturer
Larger diameter to increase the load carrying capacity
Outstanding slide properties
High ball stud articulation angles.

from

$112.31

The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$22.46

The Lemfoerder Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Manufactured to meet or exceed OE specifications

from

$103.10

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. TRW manufactures guide rods for original equipment and service needs. TRW continues to develop next-generation guide rod designs to reduce cost and weight, while maintaining or enhancing performance.

Product Features:

Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
Low friction plastic bearings that enhance damping and reliability
Manufactured using forged or cold formed steel
Two-seat design is standard, and eliminates the need for a spring
Top of the ball pins are polished
Salt Spray Test (240hrs)
Dynamic Test and Elasticity Test
Original Equipment quality hardware installation accessories

from

$24.49

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$62.99

SUBFRAME BUSHING

from

$373.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$217.99

Suspension Control Arm and Ball Joint Assembly

from

$172.32

The OE quality Febi flex joint is made of high quality rubber and is reinforced with advanced fiber materials. The manufacturer recommends the flex disc be replaced whenever the clutch components are being replaced. TECH TIP : Flex discs have an alignment or triangle arrow formed into the rubber. The pointed end must face the mounting flange on the transmission when installed to ensure longevity.

Product Features:

OE quality, fit and performance
High quality rubber
Reinforced with advanced materials
Excellent vibration control

from

$31.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$47.49

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$53.37

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$96.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:

Double lock beading with barbed tube end provides superior hose/coupling integrity
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening

from

$79.65

Track Rod

from

$2.63

Every Febi Ball Joint Snap Ring maintains the OE quality and is to be replaced every time the ball joint is removed or replaced.

Product Features:

OE expertise and quality
Precision manufactured
Corrosion protection

from

$12.60

Power Steering Reservoir Cap

from

$15.57

Coolant Level Sensor

from

$24.99

Rein Automotive OE quality power steering reservoirs, install, fit and perform the way the original manufacturer intended. These reservoirs are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.

Product Features:

Reservoir contains filter that is not-removable and reservoir must be replaced to keep power steering system functioning properly
Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
Direct fitment allows easy installation
Manufactured to strict engineering standards/specifications in materials and tolerances

from

$49.99

Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.

Product Features:

100% testing ensures leak-free performance.
Designed to match O.E. fit, function and performance.
Manufactured from O.E. grade material for strength and durability.
Resistant to cracking caused by the high temperatures in the engine compartment.
Reservoirs with integrated filter have the same filtration efficiency as O.E.