BMW 525xi Drivetrains
Top BMW 525xi Drivetrains Categories
We carry over 50 Drivetrains in inventory for the BMW 525xi. If you’re looking for aftermarket Drivetrains for your BMW 525xi, check out all these categories:
Essential BMW 525xi Drivetrains
Rein – Transfer Case Motor Assembly (Part No.TDA0001)
from
$664.99
Rein Automotive OE quality transfer case actuators are made to factory specifications ensuring proper fit, form and function. The transfer case actuator is a small motor attached to the case that proportions engine power to the front and rear differentials. High quality electronics and nylon gears are used to ensure a long service life. Our quality transfer case actuators aim to provide the professional repair technician and vehicle owner the peace of mind and trust that is expected from an OE quality component.
Product Features:
See More
Product Features:
- Rein OE quality transfer case actuators are the perfect replacement to meet the high demands placed on 4WD/AWD systems.
- Direct OE replacement including mounting hardware.
- Designed to engage or disengage the four wheel drive system as selected by the ECU of the vehicle.
- Manufactured using high quality materials.
- Restores functionality of 4WD/AWD system.
Driveworks – Tapered Roller Bearing (Part No.S-HM-89449)
Corteco – Input Shaft Seal (Part No.J1156280243CFW)
from
$18.55
Input Shaft Seal
Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.VV324)
from
$12.79
Product Features:
See More
- High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks
- Long-life friction modifiers and premium base oils help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
- Enhanced cleaning additives help reduce varnish formation and keep the transmission running properly longer
- Engineered with a unique blend of viscosity modifiers and base oils to provide better oil flow at low temperatures and greater film protection at higher temperatures
Febi – CV Joint Boot Kit (Part No.K6010292557FEB)
from
$48.15
With Clamps and Grease The Febi CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6088)
from
$99.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to BMW 04-10;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 2004-2010
- Weight approx: 1 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- CENTERLINE: 2.00 INCH / 51 MM
- MOUNT WIDTH: 6.30 INCH / 160 MM
Corteco – Axle Output Shaft Seal (Part No.K4062254230CFW)
from
$21.60
You can expect original quality and a first-to-market range from Freudenberg, the inventor and the world’s leading Original Equipment manufacturer of radial shaft seals. As the aftermarket distribution arm of Freudenberg Group – the designer and OEM manufacturer of the Simmerrings – Corteco draws on the material and manufacturing expertise of its parent company and is able to deliver products with outstanding OE quality, distinguished by the high durability of their sealing properties. A new generation of innovative seals that help to reduce friction and fuel consumption is also available.
Product Features:
See More
Product Features:
- Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
- The flanged design allows for easier and proper installation and helps avoid cocking.
- The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
- Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
Driveworks – Camshaft Seal (Part No.S-99139)
National – Bearings (Part No.LM503349A)
from
$22.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.HM88510)
from
$14.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Original Equipment – DIFFERENTIAL DRAIN P (Part No.J7065433208OEA)
from
$7.39
DIFFERENTIAL DRAIN P
Rein – Differential Plug (Part No.HWP0065)
from
$7.99
Rein Automotive OE quality oil drain plugs are made with premium materials and designed and manufactured to be direct-fit replacements. Rein oil drain plugs are designed to tight tolerances to ensure proper sealing.
Product Features:
See More
Product Features:
- Designed to tight tolerances to ensure proper sealing.
- Rein Oil Drain Plugs are coated for high corrosion resistance.
- Designed and constructed to strict engineering quality standards.
- Includes copper sealing gasket.
Original Equipment – Transfer Case Flange (Part No.J7164686942OEA)
from
$313.12
Transfer Case Flange
Corteco – Differential Side Cover Seal, 90 x 44 x 10 (Part No.J7041238121CFW)
from
$20.42
Differential Side Cover Seal, 90 x 44 x 10
Rein – CV Boot Kit (Part No.BKN0172)
from
$15.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Comes with the OE grease
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches original equipment design specifications
Febi – Axle Shaft Nut (Part No.K4030133883FEB)
from
$12.32
The Febi Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Dorman – Front Drive Shaft: OE Fix (Part No.936-311)
from
$627.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
- All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
- Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV274818)
from
$101.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Corteco – Driveshaft Bushing (Part No.K1050292291CFW)
from
$13.03
The Corteco Driveshaft Bushing is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Original Equipment – Trans Case Flange Du (Part No.J7165686972OEA)
from
$8.46
Trans Case Flange Du
National – Shaft Repair Sleeve (Part No.99139)
from
$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
BMW 525xi Drivetrains Categories
Helping You Find the Right Drivetrains for Your BMW 525xi
You love your 525xi. So we’ve made it easier than ever to help you find BMW 525xi Drivetrains in our online catalog. Our inventory holds 50 aftermarket and OEM Drivetrains for your BMW 525xi, ranging from $2.45 to $1,086.99.
We offer parts from 13 brands trusted to make quality Drivetrains for your BMW 525xi. Before you buy, take some time to read through customer reviews. We currently have 916 reviews of BMW 525xi Drivetrains from previous customers. Some of the top rated parts include Bearings with 5.0 stars.
Find your 525xi Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your BMW 525xi part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Drivetrains Brands for Your BMW 525xi
Our inventory holds Drivetrains for your BMW 525xi from 13 trusted brands. You’ll find OEM and aftermarket parts from brands like Valvoline, National, and Carquest Premium, all of which can keep that BMW happy.
We have Valvoline parts available for your BMW 525xi in categories like Differentials. Some of the top-rated Valvoline parts in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for BMW 525xi Drivetrains
What are the most purchased Drivetrains for the BMW 525xi?
Out of 50 Drivetrains for the BMW 525xi, the most popular in our inventory are:
What are the top-rated BMW 525xi Drivetrains?
Top-rated Drivetrains for your BMW 525xi based on customer reviews/ratings are:
