BMW 525i Oil and Lubricants

Essential BMW 525i Oil and Lubricants

Febi – 02582 grease (for input shaft) 90g (Part No.K600164873FEB)

02582 grease (for input shaft) 90g

from

$6.75
Febi stands for Solutions Made in Germany and is one of the leading manufacturers and suppliers of car and truck spare parts in the independent aftermarket.

Product Features:
  • Original Febi spare parts
  • Proven OE: Febi fulfills all eligibility requirements
  • High driving comfort through the use of perfectly matched materials and impeccable design
See More

Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Quart (Part No.VV831)

High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Quart

from

$12.49
Valvoline High Performance Gear Oil is an extreme pressure gear lubricant formulated with quality base oils and superior additives that helps protect against severe temperatures, shock loads, scuffing, scouring, corrosion and pitting in high speed, high load, high torque and high horsepower conditions.

Product Features:
  • Formulated for reliable gear protection
  • Protects against severe temperatures to help extend service life
  • Formulated with extreme-pressure additives to minimize gear wear from shock loads
  • Helps protect against gear wear from scuffing, scouring, corrosion and pitting
  • Recommended for conventional hypoid differentials and non-synchronized manual transmissions in passenger cars, light trucks, sport utility vehicles, vans and heavy-duty trucks where an API-GL5 or GL-4 fluid is specified
  • PLEASE NOTE: Valvoline recommends SynPower Full Synthetic Gear Oil for limited slip differentials
See More

FRAM – Conventional 10W30 Engine Oil with Low-Speed Pre-Ignition Control – 5 Qt (Part No.F630-5QT)

Conventional 10W30 Engine Oil with Low-Speed Pre-Ignition Control - 5 Qt

from

$25.99
FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Suitable for modern engines: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs.
See More

FRAM – 5W-20 Full Synthetic Motor Oil, Faster Oil Flow, 5 Quart (Part No.F920-5QT)

5W-20 Full Synthetic Motor Oil, Faster Oil Flow, 5 Quart

from

$27.99
FRAM Engine Oil Full Synthetic SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Excellent sludge and varnish protection
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-20 meets stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
  • Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for GDI and TGDI engines, thereby reducing the risk of pre-mature engine failure.
  • Versatile Compatibility: Suitable for gas-direct engine (GDI), turbo gas-direct engine (TGDI), carbureted, and normally fuel-injected engines, making it a versatile choice for various engine types.
See More

FRAM – Full Synthetic 10W-30 Motor Oil – Helps Extend Motor Life, 1 Quart (Part No.F940)

Full Synthetic 10W-30 Motor Oil - Helps Extend Motor Life, 1 Quart

from

$7.49
FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories.

Product Features:
  • Outstanding thermal and oxidation stability
  • Excellent sludge and varnish protection
  • Faster oil flow at start-up
  • Volatility: lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Ultimate engine protection: FRAM Full Synthetic Oil 10W30 1 QT is specifically formulated with high-quality synthetic base stocks and advanced additive technology to provide the ultimate protection for your engine, ensuring its longevity and performance.
See More

FRAM – 5W-20 Conventional Motor Oil, with Low-Speed Pre-Ignition Control 1 Quart (Part No.F610)

5W-20 Conventional Motor Oil, with Low-Speed Pre-Ignition Control 1 Quart

from

$6.49
FRAM Engine Oil SAE 5W-20 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-20 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Reliable engine protection: FRAM Conventional Oil 5W20 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
See More

Castrol – GTX High Mileage 5W-30 Synthetic Blend Motor Oil, 1 Quart (Part No.149D6A)

GTX High Mileage 5W-30 Synthetic Blend Motor Oil, 1 Quart

from

$10.49
Castrol GTX High Mileage 5W-30 is the #1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.

Product Features:
  • Phosphorus Replacement Technology helps extend emission system life
  • Superior dispersancy that fights sludge build up
  • Exceptional oil burn-off protection exceeding industry standards (1)
  • Seal conditioners to help reduce leaks
  • Advanced additives that minimize engine wear
  • Improved fuel economy (2)
  • (1)Based on API and ACEA volatility specifications
  • Approved for BMW M-Models
  • (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
  • Meets or exceeds the following specifications:
  • API SP/SN PLUS/SN/SM
  • ILSAC GF-6
  • Meets Ford WSS-M2C946-B1
  • Meets Ford WSS-M2C961-A1
See More

Quaker State – 10W-40 Conventional Motor Oil, Reduces Engine Wear, 1 Quart (Part No.550034964)

10W-40 Conventional Motor Oil, Reduces Engine Wear, 1 Quart

from

$6.29
Quaker State 10W-40 conventional motor oil helps engines survive daily commutes from high-speed highway operation to repetitive, stop-and-go driving. It maintains the required viscosity from start to finish, providing optimal protection. Quaker State Motor Oil combats engine sludge and deposits, providing rust protection from harmful acids generated by engine contaminants. It reduces engine wear, providing durable wear protection. Quaker State 10W-40 Motor Oil exceeds the requirements of the following industry specifications: API SN and all previous categories. For a full list of equipment approvals and recommendations, please consult your local Quaker State Technical Help Desk and always consult your owners manual.

Product Features:
  • Conventional 10W-40 that provides durable wear protection and reduces engine wear
  • Provides corrosion protection against harmful acids generated by engine contaminants
  • Maintains viscosity from start to finish, providing optimal oil film protection
  • Helps engines survive daily commutes from high-speed highway operation to repetitive, stop-and-go driving
  • Combats engine sludge and deposits
  • Formulated to exceed the requirements of industry specification API SN and all previous categories
  • Formerly known as Quaker State Advanced Durability 10W-40 motor oil
  • Rust Protection: Provides rust protection from harmful acids generated by engine contaminants, extending the life of your engine.
See More

Quaker State – 10W-40 Motor Oil 5 Quart (Part No.550044961)

10W-40 Motor Oil 5 Quart

from

$34.99
Quaker State 10W-40 conventional motor oil helps engines survive daily commutes from high-speed highway operation to repetitive, stop-and-go driving. It maintains the required viscosity from start to finish, providing optimal protection. Quaker State Motor Oil combats engine sludge and deposits, providing rust protection from harmful acids generated by engine contaminants. It reduces engine wear, providing durable wear protection. Quaker State 10W-40 Motor Oil exceeds the requirements of the following industry specifications: API SN and all previous categories. For a full list of equipment approvals and recommendations, please consult your local Quaker State Technical Help Desk and always consult your owner’s manual.

Product Features:
  • Conventional 10W-40 that provides durable wear protection and reduces engine wear
  • Provides corrosion protection against harmful acids generated by engine contaminants
  • Maintains viscosity from start to finish, providing optimal oil film protection
  • Helps engines survive daily commutes from high-speed highway operation to repetitive, stop-and-go driving
  • Combats engine sludge and deposits
  • Formulated to exceed the requirements of industry specification API SN and all previous categories
  • Formerly known as Quaker State Advanced Durability 10W-40 motor oil
See More

Idemitsu – Type HP Automatic Transmission Fluid – 1 qt (Part No.10107-042F)

Type HP Automatic Transmission Fluid - 1 qt

from

$10.29
Formulated to meet the specific requirements of Subaru vehicles equipped with conventional (non-CVT) transmissions up to model year 2005. Recommended for service-fill in all Subaru automatic transmissions where SUBARU ATF HP is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:
  • Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
  • Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
  • Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
  • Advanced anti-wear technology provides maximum protection to gears and bearings
See More

Permatex – Ceramic Extreme Brake Parts Lubricant (Part No.3C210445993PMX)

Ceramic Extreme Brake Parts Lubricant

from

$26.83
5 fl. oz. Tube – A 100% synthetic formula, coupled with real ceramic solids make this premium brake lubricant our longest lasting, most temperature resistant way to silence brake noise. Effective from -50F to 3000F (-46C to 1649C), this product maintains its lubricating integrity under the most extreme conditions. Resistant to corrosion and contaminants, it will not wash out. Suggested Applications: Disc brake caliper hardware, bushings, pistons, rubber sleeves and seals. DIRECTIONS:

Product Features:
  • Clean parts to be lubricated with Permatex® Brake and Parts Cleaner
  • Apply small amount to caliper hardware, backing plates, bushings and seals to create uniform surface areas and prevent noise. Safe on rubber seals and plastic.
  • Lubricant may also be used as a noise suppressor to eliminate caliper brake squeal by applying to the BACK of the brake pad.
  • DO NOT APPLY TO ANY BRAKING SURFACES. TECHNICAL DATA SHEET
See More

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon (Part No.882505)

SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon

from

$59.99
Valvoline SAE 75W-90 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our detergent package-based formulation contains Full Synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance. Protect your gears with Valvoline, the #1 gear oil brand.

Product Features:
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION , ranging from -30F to 300F degrees
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
  • MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP HYPOID DIFFERENTIALS where APPI GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
  • MEETS OR EXCEEDS THE PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360
See More

Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (Part No.889785)

Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart

from

$18.99
We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

Product Features:
  • FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
  • MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360
See More

Helping You Find the Right Oil and Lubricants for Your BMW 525i

You love your 525i. So we’ve made it easier than ever to help you find BMW 525i Oil and Lubricants in our online catalog. Our inventory holds 83 aftermarket and OEM Oil and Lubricants for your BMW 525i, ranging from $6.29 to $154.99.

We offer parts from 13 brands trusted to make quality Oil and Lubricants for your BMW 525i. Before you buy, take some time to read through customer reviews. We currently have 87,152 reviews of BMW 525i Oil and Lubricants from previous customers. Some of the top rated parts include European Vehicle Full Synthetic 5W-40 Engine Oil: For Gasoline & Diesel Engines, 1 Quart with 4.9 stars and 10W-40 Conventional Motor Oil, Reduces Engine Wear, 1 Quart with 4.8 stars.

Find your 525i Oil and Lubricants here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your BMW 525i part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Oil and Lubricants Brands for Your BMW 525i

Our inventory holds Oil and Lubricants for your BMW 525i from 13 trusted brands. You’ll find OEM and aftermarket parts from brands like Castrol, Fram, and Valvoline, all of which can keep that BMW happy.

Top-Rated Castrol Oil and Lubricants

Leading Castrol Oil and Lubricants

We carry Castrol brand parts for your BMW 525i across several catalog categories, including Motor Oil. Some of our most reviewed Castrol parts include:

FAQs for BMW 525i Oil and Lubricants

What are the most purchased Oil and Lubricants for the BMW 525i?

Out of 83 Oil and Lubricants for the BMW 525i, the most popular in our inventory are:
5W-30 Full Synthetic Motor Oil: 5 Quart
from $27.99
This product is not rated
5W-30 Full Synthetic Motor Oil: 5 Quart
Engine Oil

What are the top-rated BMW 525i Oil and Lubricants?

Top-rated Oil and Lubricants for your BMW 525i based on customer reviews/ratings are:
10W-40 Conventional Motor Oil, Reduces Engine Wear, 1 Quart
from $6.29
(478)
10W-40 Conventional Motor Oil, Reduces Engine Wear, 1 Quart
“This is by far a great product for any automobile.”
10W-40 Motor Oil 5 Quart
from $34.99
(478)
10W-40 Motor Oil 5 Quart
“oem product.”