BMW 328Xi Fuel and Emissions Systems
Top BMW 328Xi Fuel and Emissions Systems Categories
We carry over 73 Fuel and Emissions Systems in inventory for the BMW 328Xi. If you’re looking for aftermarket Fuel and Emissions Systems for your BMW 328Xi, check out all these categories:
Essential BMW 328Xi Fuel and Emissions Systems
Carquest Premium – Fuel Cap: 10844, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10844)
from
$39.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Elring – Fuel Injector Seal (Part No.C1010681908ELR)
from
$2.51
Fuel Injector Seal
APA/URO Parts – Fuel Sender Seal (Part No.E2050269527APA)
from
$21.88
Fuel Sender Seal
Pierburg – Secondary Air Injection Check Valve (Part No.B6050380208APG)
from
$157.96
The Pierburg Air Pump Control Valve is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Carquest Premium – Fuel Injector Seal Kit (Part No.AS045)
from
$5.29
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Vemo – Air Pump (Part No.B6010380210VMO)
from
$515.36
The Vemo Air Pump is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Carquest Premium – Reman Multi Port Fuel Injector – 6 Pack (Part No.A212-2385-6PK)
from
$287.99
The Carquest line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA. Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.
Product Features:
See More
Product Features:
- Includes six premium fuel injectors
- Each unit is 100% tested to OE specifications
- Includes new o-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
DENSO – Wideband Oxygen Sensor: Upstream, 5 Wire, 46.85" Long, Heated, Exact Fit (Part No.234-5138)
from
$245.99
DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement+ and a first time fit.; DENSO gives you the right part and the right fit+ the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Carquest – Fuel Injector (Part No.67330)
from
$145.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Stainless steel calibration slide and spring assembly prevents corrosion within the fuel control body leading to an extended service life
- Precision wound and trimmed solenoid windings allow the computer to command efficient delivery of fuel
- High-temp Viton O-rings enable prolonged sealing of injector under extreme heat conditions
- Fiber optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
- BWD is a global manufacturer of original equipment and aftermarket fuel injection products, complete quality control is maintained through the manufacturing process from componentry to finished product
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Rein – Air Injection Pump H (Part No.B7042669697RIN)
from
$56.70
Air Injection Pump H
Rein – Breather Hose (Part No.ABV0163)
from
$51.99
Rein Automotive OE quality breather hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses, Rein hoses are identical to the OEM.
Product Features:
See More
Product Features:
- Matches original equipment design specifications.
- Manufactured with high quality materials.
- Direct fit for easy installation.
- Resistant to heat, salt, road debris, oil and other contaminants.
ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2164)
from
$16.79
ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
APA/URO Parts – Intake Manifold Actu (Part No.B1205466802APA)
from
$266.82
Intake Manifold Actu
Original Equipment – AMBIENT TEMP SENSOR (Part No.P4025449414OEA)
from
$53.39
AMBIENT TEMP SENSOR
Walker – Walker Oxygen Sensor (Part No.C5010380278WKR)
from
$139.46
Walker Oxygen Sensors are precision made for outstanding performance and manufactured to meet and exceed all original equipment specification and test requirements.
Product Features:
See More
Product Features:
- Improved Engine Response and Performance
- Lower Emissions
- Improved Fuel Economy
- Longer Sensor Life
- Meets OEM Specifications Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install
Carquest Premium – Fuel Cap Tester Adapter (Part No.12426)
from
$43.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Carquest Premium – Vapor Canister (Part No.CPN2196)
from
$525.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Evaporative Emissions System Leak Detection Pump (Part No.VDC1019)
from
$267.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
APA/URO Parts – Vapor Canister Gromm (Part No.B7085566156APA)
from
$7.07
Vapor Canister Gromm
Elring – Fuel Injector Seal (Part No.C1010250108ELR)
from
$7.03
Fuel Injector Seal
APA/URO Parts – Intake Manifold Actu (Part No.B1205466803APA)
from
$371.37
Intake Manifold Actu
aFe POWER – Sprint Booster (Part No.77-16302)
from
$339.99
Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.
Product Features:
See More
Product Features:
- Reduces Throttle Response Time
- Improves Acceleration
- Easy To Install
- Does Not Affect The Vehicles Electronic System
Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG0917)
from
$334.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Lower amperage draws less load on vehicle’s electrical system
- Part is validated, tested and matched to the right vehicle application
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Lower failure rates due to its innovative design and durability
APA/URO Parts – Fuel Pump Assembly (Part No.E3001311568APA)
from
$314.86
Fuel Pump Assembly
BMW 328Xi Fuel and Emissions Systems Categories
Helping You Find the Right Fuel and Emissions Systems for Your BMW 328Xi
You love your 328Xi. So we’ve made it easier than ever to help you find BMW 328Xi Fuel and Emissions Systems in our online catalog. Our inventory holds 73 aftermarket and OEM Fuel and Emissions Systems for your BMW 328Xi, ranging from $2.51 to $533.99.
We offer parts from 24 brands trusted to make quality Fuel and Emissions Systems for your BMW 328Xi. Before you buy, take some time to read through customer reviews. We currently have 740 reviews of BMW 328Xi Fuel and Emissions Systems from previous customers. Some of the top rated parts include Cap-Fuel with 4.5 stars and Mass Air Flow Sensor with 5.0 stars.
Find your 328Xi Fuel and Emissions Systems here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your BMW 328Xi part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Fuel and Emissions Systems Brands for Your BMW 328Xi
Our inventory holds Fuel and Emissions Systems for your BMW 328Xi from 24 trusted brands. You’ll find OEM and aftermarket parts from brands like Bosch, Carquest Premium, and Delphi, all of which can keep that BMW happy.
We have Carquest parts available for your BMW 328Xi in categories like Fuel Injectors. Some of the top-rated Carquest parts in these categories are:
Top-Rated Bosch Fuel and Emissions Systems
Leading Bosch Fuel and Emissions Systems
We carry Bosch brand parts for your BMW 328Xi across several catalog categories, including Oxygen Sensors. Some of our most reviewed Bosch parts include:
FAQs for BMW 328Xi Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the BMW 328Xi?
Out of 73 Fuel and Emissions Systems for the BMW 328Xi, the most popular in our inventory are:
What are the top-rated BMW 328Xi Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your BMW 328Xi based on customer reviews/ratings are:
from
$34.99
(2)
Cap-Fuel
“For 2002 bmw 325i this gas cap is excellent quality and comes with the strap to hang it on fuel door excellent loved it”
