BMW 328Xi Parts

Name: Door Window Switch
Brand: Carquest Premium
SKU: WSC2392
Price: 225.99 USD

Please Select your Vehicle to See Exact Fit Parts

BMW 328Xi Body Parts

from

$225.99

The Door Window Switch is an application specific part typically mounted to the inside door panel used to remotely open and close the door windows by way of the switch.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$13.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:

Rubber bump stops match the shore hardness of the original equipment bump stop to ensure maximum performance and product longevity
Matches Original Equipment design specifications
Recommend to replace bump stops in pairs to ensure best performance. Note: Bump Stop Sets contain the needed pair

from

$19.99

New Standard Replacement Driver Side Fender Liner, Rear Section, E92/E93

Product Features:

Rear Section, E92/E93, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$23.49

Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:

Direct replacement – this hood release cable is made to match the original cable on specific vehicles
Durable construction -manufactured within strict tolerances for reliable longevity
Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$82.99

This trunk lock actuator motor matches fit and function of the original equipment actuator motor to restore proper trunk latch functions. Designed as a direct replacement, this part plugs into the factory wiring.

Product Features:

Ideal replacement – this trunk lock actuator motor matches the fit and function of the original actuator motor to restore trunk latch functions
Simple installation – this actuator motor features factory-style connectors and plugs into the original wiring harness
Cost-effective solution – offers original equipment function at a competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$42.99

New Standard Replacement Passenger Side Fender Splash Shield, Rear Section, Sedan And Wagon

Product Features:

Rear Section, Sedan And Wagon, Made Of Polyethylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$7.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Front Bumper Center Grille, Without Adaptive Cruise Control. It is Designed to Replace Your Existing Bumper Cover Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

Without Adaptive Cruise Control, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$78.99

Heated Replacement Mirror Glass Assembly. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

Replace your cracked or broken passenger side Mirror glass at a fraction of the dealer cost
Wiring harness must be unplugged from existing backing plate and plugged into the new backing plate before installation
Original equipment quality, fit, and function
Step-by-step instructions for easy installation
Heated

from

$27.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Passenger Side Grille, Chrome/Black. It is Designed to Replace Your Existing Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

Chrome/Black, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$31.99

New Standard Replacement Rear Bumper Center Impact Strip, For Coupe/Convertible 3.0 Liter With M-Package Models

Product Features:

For Coupe/Convertible 3.0 Liter With M-Package Models, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$37.49

Replacement Mirror Glass. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

The most economical way to replace cracked Mirror glass
Glass measures 3 13/16″ tall by 6 13/16″ wide and 6 7/8″ diagonally
This glass fits Mirrors with Heated Power function only
Mounting tape included for low-hassle stick-on installation
Step-by-step instructions for easy installation

from

$144.99

Dynamic air scoops are constructed out of lightweight black powder coated aluminum and simply install behind the kidney bean grille. Increased air velocity and flow improves performance and throttle response.

Product Features:

Lightweight For Strength and Styling
Directs Frontal Air Into Intake System For Max. Performance
No Cutting Or Drilling On OEM Parts
Fast Installation

from

$49.99

Uplift your driving experience with the Burco 4267 replacement side view mirror, expertly designed for popular BMW models such as the M3, Z4, 328i, and more. This high-quality glass-only mirror provides an economical solution for those grappling with a broken mirror. Its straightforward installation process means you can quickly restore your vehicle’s visibility and safety without the fuss. By ensuring compliance with all safety standards, the Burco 4267 guarantees you’re making a smart investment while enhancing your driving comfort. Don¿t compromise on safety; trust this reliable automotive mirror replacement to improve your view and keep you confident on the road. Restore your side mirror today and enjoy the clarity you deserve!

Product Features:

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$73.99

AISIN Window Regulator Assemblies and Motors are mechanical and electrical components that work together to raise and lower the power windows in a vehicle. The window regulator assembly is the mechanical component that consists of gears, tracks and other parts that move the window up and down. The electric motor is the component that provides the power to move the window. Together, they form the power window system that allows the driver and passengers to easily raise and lower the windows with the push of a button.

Product Features:

100% new with many improvements from factory design.
Designed and manufactured to meet OE standards.
Strict quality control to ensure perfect fit.

from

$135.99

The original equipment window regulator on certain BMW models binds when the cable deforms over time. This Dorman OE FIX replacement features added tension springs, cable guides and sheathing to help resist reel binding.

Product Features:

Improved replacement – this window regulator and motor assembly features enhancement over the factory part for greater reliability
Failure-resistant design – features cable tension springs to resist cable reel binding caused by a stretched cable
Enhanced components – also includes cable guides and sheathing to eliminate high tension and reduce cable stretching
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Failure-resistant design – features cable tension springs to resist cable reel binding from medium-term elongation

from

$38.99

Bumper Cvr Reflector

from

$63.99

New Economy Replacement Passenger Side Fender

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$65.99

Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:

Protects vehicle’s hood from bugs or rock chips
Low profile, aerodynamic design
Installs in less than 5 minutes, no tools required
Custom fit exactly to your vehicle
Leather grain vinyl

from

$159.99

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

Full front end coverage
Custom fit exactly to your vehicle
Installs easily with no drilling or tools
Leather grain vinyl

from

$241.99

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$217.99

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$257.99

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$16.49

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:

Exact fit original equipment design guarantees correct fit and function
Engineered and built to meet or exceed original equipment quality standards
Individually tested for performance and reliability
Hardened, nitride plated steel shaft provides optimal durability
Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
Heavy gauge steel body is electrostatically painted and heat cured to OE specs
Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
No special installation tools required
Consistent Performance In All Weather Conditions
Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

from

$30.99

Exact fit original equipment design guarantees correct fit and function
Engineered and built to meet or exceed original equipment quality standards
Individually tested for performance and reliability
Hardened, nitride plated steel shaft provides optimal durability
Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
Heavy gauge steel body is electrostatically painted and heat cured to OE specs
Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
No special installation tools required
Consistent Performance In All Weather Conditions
Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

from

$8.99

For European vehicles, A.P.A. manufactures the URO Parts brand of quality replacement parts, which meet or exceed OEM specifications. URO Parts components are ideal for both professional and DIY vehicle repair, and are often the exclusive aftermarket alternative to overpriced ¿Genuine¿ components. By reducing deferred maintenance with URO Parts, you will increase the bottom line of your business. With its URO Premium line, A.P.A. offers problem-solving upgraded components that are superior to failure-prone OEM parts in design and/or materials. A.P.A. is so confident in the longevity and reliability of URO Premium products, . URO Parts also specializes in accurate reproduction parts for classic vehicles, including a huge variety of items that are no longer available from the dealer.

Product Features:

Guaranteed fitment
Restores original trunk lid lift assistance
OE-style end fittings for easy DIY installation
Maintenance-free high pressure gas strut equals or exceeds OE performance
Quality metal housing and piston rod assemblies resist wear
Low-friction rod guides and oil seals deliver long life and leak-free performance

BMW 328Xi Transmission Parts

from

$320.99

Carquest Premium vehicle speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium vehicle speed sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each vehicle speed sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium speed sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
O-rings or seals are included (where applicable)
Magnet size and strength optimized for precise signal output.
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$15.99

For European vehicles, A.P.A. manufactures the URO Parts brand of quality replacement parts, which meet or exceed OEM specifications. URO Parts components are ideal for both professional and DIY vehicle repair, and are often the exclusive aftermarket alternative to overpriced ¿Genuine¿ components. By reducing deferred maintenance with URO Parts, you will increase the bottom line of your business. With its URO Premium line, A.P.A. offers problem-solving upgraded components that are superior to failure-prone OEM parts in design and/or materials. A.P.A. is so confident in the longevity and reliability of URO Premium products, they’re covered by an unlimited mileage, . URO Parts also specializes in accurate reproduction parts for classic vehicles, including a huge variety of items that are no longer available from the dealer.

Product Features:

Guaranteed fitment
High-quality materials are heat and ozone resistant to maximize durability
Aligns and supports transfer case per OE specifications
Reduces drivetrain vibration and restores smooth operation

from

$6.99

All Rein Automotive control arm bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts performs like original.
Manufactured to strict engineering standards/specifications in materials and tolerances
Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
Recommend to replace bushings in pairs to ensure best performance. note: control arm bushing kits contain the needed pair.

from

$10.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$396.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Neutral Safety Switch prevents the engine from starting unless the transmission is in neutral or park, enhancing safety by reducing the risk of accidental movement while starting the vehicle. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$22.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$49.99

from

$2.99

For European vehicles, A.P.A. manufactures the URO Parts brand of quality replacement parts, which meet or exceed OEM specifications. URO Parts components are ideal for both professional and DIY vehicle repair, and are often the exclusive aftermarket alternative to overpriced ¿Genuine¿ components. By reducing deferred maintenance with URO Parts, you will increase the bottom line of your business. With its URO Premium line, A.P.A. offers problem-solving upgraded components that are superior to failure-prone OEM parts in design and/or materials. A.P.A. is so confident in the longevity and reliability of URO Premium products, they’re covered by an unlimited mileage, lifetime warranty. URO Parts also specializes in accurate reproduction parts for classic vehicles, including a huge variety of items that are no longer available from the dealer.

Product Features:

Guaranteed fitment
Precision-molded to OE coolant pipe o-ring dimensions for easy installation
Cooling system heat and antifreeze resistant
Durable ECD (Electro Chemical Degradation)-resistant EPDM material helps prevent electrolysis
Temperature rating: -40║ F to 275║ F (-40║ C to 135║ C)
Temperature rating: -40º F to 275º F (-40º C to 135º C)
24 Month Unlimited Mileage Warranty

from

$45.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces.
SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$2587.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road; We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions; Each Moveras transmission is produced in a World Class manufacturing facility; Our entire process has been developed from scratch, utilizing LEAN manufacturing principles; Our transmissions are produced in a Clean Room environment; Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Product Features:

OEM-Level Quality: Each transmission is remanufactured to meet or exceed original manufacturer specifications for seamless compatibility and superior performance
Advanced Remanufacturing Process: Each transmission is completely disassembled, and critical components are replaced or upgraded to ensure long-lasting performance
High-Quality Torque Converter: A fully remanufactured torque converter is included, tested for leaks, lock-up functionality, and balance to enhance durability and smooth operation
Precision Engineering: Each valve body is remanufactured to OEM specifications, ensuring proper hydraulic flow and consistent shift performance
Dyno Testing: All Moveras transmissions are dyno-tested under real-world driving conditions to ensure reliable, consistent performance before leaving the factory
Nationwide Limited Warranty: Every transmission comes with a comprehensive Limited Warranty, giving you confidence and peace of mind, no matter where you are on the road

from

$2587.99

OEM-Level Quality: Each transmission is remanufactured to meet or exceed original manufacturer specifications for seamless compatibility and superior performance
Advanced Remanufacturing Process: Each transmission is completely disassembled, and critical components are replaced or upgraded to ensure long-lasting performance
High-Quality Torque Converter: A fully remanufactured torque converter is included, tested for leaks, lock-up functionality, and balance to enhance durability and smooth operation
Precision Engineering: Each valve body is remanufactured to OEM specifications, ensuring proper hydraulic flow and consistent shift performance
Dyno Testing: All Moveras transmissions are dyno-tested under real-world driving conditions to ensure reliable, consistent performance before leaving the factory
Nationwide Limited Warranty: Every transmission comes with a comprehensive Limited Warranty, giving you confidence and peace of mind, no matter where you are on the road

from

$38.99

Transmission Oil Pan Screw Kit

from

$53.99

Anchor 10089 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2001-2015
Weight approx: 1 Lbs
Outer Diameter: 3.55 In. / 90.2 mm
Insert Depth: 1.45 Inch / 36.83 Mm
Center Id: 0.5 Inch / 12.7 Mm

from

$89.99

The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$4.99

Design type: springless; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$20.49

Product Features:

Brand may vary by location

from

$211.99

When the factory transmission fluid filter requires servicing on certain vehicles, you have to replace the entire oil pan. This Dorman OE FIX replacement features a serviceable filter for easier future service, with all necessary hardware.

Product Features:

Smart replacement – this replacement transmission oil pan features a removable filter to simplify future service
Complete kit – includes new transmission pan, filter, gasket and bolts for complete conversion
Reduces maintenance cost – direct replacement filter is available separately for less expensive future service
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$16.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Back Up Light Switch automatically activates the rear backup lights when the vehicle is shifted into reverse. This improved visibility for the driver and alerts other vehicles or pedestrians when the vehicle is reversing, reducing the risk of accidents. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

BMW 328Xi Clutch Systems

from

$936.99

Over 30 years ago, Schaeffler engineers under the LuK product brand developed a revolutionary technology for damping torsional vibrations in the drivetrain : the dual mass flywheel (DMF). Unlike a conventional flywheel, the DMF consists of two masses which are mounted to rotate against each other. A damping system in the form of arc springs is integrated into the DMF. Thus, it absorbs the torsional vibrations of the engine almost completely.

Product Features:

A LuK DMF absorbs engine vibrations and torque spikes, preventing damage to the gearbox.
A LuK dual mass flywheel (DMF) leads to less Bending Stress on the engines crankshaft.
A LuK dual mass flywheel (DMF) leads to less vibration going to the Clutch Pedal.
A LuK dual mass flywheel (DMF) reliably dampens torsional vibrations in the powertrain and increases driver and passenger comfort.
A Luk DMF absorbs engine vibrations and torque spikes, preventing damage to the gearbox.á
A Luk dual mass flywheel (DMF) leads to less Bending Stress on the engines crankshaft.
A Luk dual mass flywheel (DMF) leads to less vibration going to the Clutch Pedal.
A Luk dual mass flywheel (DMF) reliably dampens torsional vibrations in the powertrain and increases driver and passenger comfort.
A Luk dual mass flywheel dampens torsional vibrations in the powertrain and ensures driving comfort in all speed ranges. Matched to the each vehicle, the DMF enables low-speed driving and ensures lower fuel consumption and emissions.

from

$592.99

LuK: The brand professionals trust. For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet clutch components. Each set contains everything you need to get the job done right. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

Enjoy a light, comfortable pedal that stays consistent over the clutch’s life.
Find the perfect LuK clutch engineered for your specific car or light commercial vehicle.
Kits include everything needed for a quick, correct fit and reliable clutch performance.

from

$148.99

The release system is the connection between pedal and clutch and it has a decisive influence on the driving experience. To ensure that the clutch is easy to operate and that the power flow can be safely metered, all components of the release system must work perfectly together. Under its LuK brand, Schaeffler has played a decisive role in the development of hydraulic clutch actuation technology. LuK offers all components of the release system as spare parts for the independent market in case of a defect, with OE quality.

Product Features:

Every LuK Clutch Slave Cylinder is precision engineered. LuK employs advanced materials and manufacturing techniques to optimize performance that results in smooth and precise clutch engagement in every driving situation.
LuK Clutch Slave Cylinders durability offer exceptional resistance to wear, heat, and stress. This ensures that the clutch system operates reliably under all conditions, providing drivers with confidence and peace of mind on the road.
LuK slave cylinders are designed for easy installation, ensuring a smooth and efficient replacement process.
LuK Clutch Slave Cylinders are a high quality replacement that¿meets or exceeds OE specifications. This clutch slave cylinders focus on quality and reliability is¿designed for optimal performance¿and to extend the life of the clutch.
LuK Clutch Slave Cylinders are a high quality replacement that┐meets or exceeds OE specifications. This clutch slave cylinders focus on quality and reliability is┐designed for optimal performance┐and to extend the life of the clutch.
LuK products are equipped with an integrated travel sensor where needed. This senses the position of the clutch pedal. This is important for start-stop systems and functions like electric parking brake, hill-start and speed control.

from

$126.99

At the core of every LuK Clutch Master Cylinder lies a dedication to precision engineering. Each cylinder is meticulously designed and manufactured to exacting standards, ensuring seamless integration with the vehicle’s clutch system.
LuK employs advanced materials and manufacturing techniques to optimize the performance of their master cylinders, resulting in smooth and precise clutch engagement in every driving situation.
LuK products are equipped with an integrated travel sensor where needed. This senses the position of the clutch pedal. This is important for start-stop systems and functions like electric parking brake, hill-start and speed control.
The LuK Clutch Master Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Where required LuK Master Cylinders have a peak torque limiter. It reduces the volume flow in the hydraulic system during sport driving. This prevents overloading the powertrain from sudden starts, like when slipping off the clutch pedal.

from

$26.49

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

BMW 328Xi Automotive Accessories

from

$115.99

In the quest for the most advanced concept in floor protection, the talented designers and engineers at WeatherTech have worked tirelessly to develop the most advanced floor protection available today. The WeatherTech FloorLiner accurately and completely lines the interior carpet giving absolute interior protection . The WeatherTech FloorLiner lines the interior carpet up the front, back and even up the sides of the vehicles footwell. Digital laser measurements of interior surfaces offer a consistently perfect fit. A patent pending High Density Tri Extruded material allows for a rigid core for strength while offering surface friction to the carpet, as well as tactile feel to the surface. Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving. Once fluids become trapped in the reservoir, away from shoes and clothing, they are easily removed from the WeatherTech FloorLiner over the door sill. No muss no fuss.

Product Features:

Accurately And Completely Lines The Interior Carpet Giving Absolute Interior Protection
Lines The Interior Carpet Up The Front, Back And Even Up The Sides Of The Vehicles Footwell
Digital Laser Measurements Of Interior Surfaces Offer A Consistently Perfect Fit
A Patent Pending High-Density Tri-Extruded Material Allows For A Rigid Core For Strength While Offering Surface Friction To The Carpet, As Well As Tactile Feel To The Surface
Advanced Surfacing Creates Channels That Carry Fluids And Debris To A Lower Reservoir With Further Channeling To Help Minimize Fluid Movement While Driving
Manufactured From A Proprietary Custom Blended TPO (Thermopolyolefin) That Is Not Only Wear Resistant, But Also Remains Flexible Under Extreme Temperatures
Available in fronts, rears, center hump, 3rd and 4th row, and complete sets
Available in black, tan, grey and cocoa

from

$23.99

Kats Heater believes that quality is a basic requirement in the design, manufacture, and delivery of our products and services. Our quality policy is Total Customer Satisfaction in the delivery of products and services to consistently meet evolving customer expectations. We shall continuously pursue quality improvement programs that enable each employee to do his or her job right the first time and each time.

Product Features:

Engine heater replacement cord

from

$117.99

The UVS100 Sunscreen is an affordable way to protect the interior of your vehicle from damaging UV rays as well as adding a level of comfort and protection by reducing the interior temperature of the vehicle on hot days. The sunscreen is custom-fitted so that there is maximum coverage of the windshield area and ease of installation. Sometimes called heat shields, sun shields or UV shields, sunscreens are useful at the beach, work, airport or anywhere you park. This premium quality, custom patterned folding sunscreen also features a soft felt lining on the inside to help protect your interior.

Product Features:

Custom fit to the windshield for complete coverage
Protect the dash and other interior components from damage by the sun
Reduce the interior temperature of the vehicle on hot days
The foam core center of the shield acts as an insulator
Easy to use and store away when not in use

from

$117.99

Custom fit to the windshield for complete coverage
Protect the dash and other interior components from damage by the sun
Reduce the interior temperature of the vehicle on hot days
The foam core center of the shield acts as an insulator
Easy to use and store away when not in use

from

$117.99

Custom fit to the windshield for complete coverage
Protect the dash and other interior components from damage by the sun
Reduce the interior temperature of the vehicle on hot days
The foam core center of the shield acts as an insulator
Easy to use and store away when not in use

from

$69.99

The Ultra car cover offers protection against dust, debris, tree sap and other environmental pollutants. This lightweight vehicle cover is comprised of 3 layers of polypropylene. Our duor car covers are fully breathable, with ultra-sonically welded seams for added durability. This cover is perfect for garage or carport stored vehicles, and can also be used for short-term outdoor storage. This soft, nonabrasive material will not harm the surface of your vehicle. The Ultra cover features a full elastic hem and built-in grommets. This auto cover is gray in color and includes a storage bag and antenna patch. Our covers are available in a variety of sizes that will popular car makes and models.

Product Features:

This car cover fits cars 200″ L x 60″ W x 51″ H
This car cover is made from a 3 layer, UV resistant material that will protected your vehicle’s paint from fading
This car cover is water resistant and features ultrasonically welded seams for extra durability
Cover is suitable for short term outdoor protection and long-term indoor protection
This car cover fits vehicles like: Ford Mustang, Chevrolet Corvette Stingray Coupe, Chevrolet Corvette, Ford Thunderbird, Honda Civic

from

$99.99

The Budge Rain Barrier car cover offers easy to use, 100% waterproof indoor and outdoor protection. This vehicle cover is constructed from a 3 layer material consisting of an inside and outside layer of spun-bond polypropylene. The middle layer is made from a waterproof film. Unlike most waterproof car covers, the Budge Rain Barrier features micro-pore technology that allows condensation to escape as evaporated gas, giving your vehicle inside and outside protection. This cover is great for outdoor and indoor use. The soft, nonabrasive material will not harm the surface of your vehicle. This cover features a full elastic hem and built-in grommets. This cover is available in a tan color. Includes a storage bag and antenna patch. Our car covers are available in a variety of sizes that will popular car makes and models. This car cover fits cars 200″ L x 60″ W x 51″ H.

Product Features:

This car cover fits cars 200″ L x 60″ W x 51″ H.
This waterproof car cover will defend against outdoor elements like rain, snow, sun, dirt, dust and more
This car cover is made from a 3 layer microporous material that makes an ultimate rain barrier
This vehicle cover features ultrasonically welded seams for extra durability
Elasticized hem and sewn-in grommets hold your car cover in place in windy-conditions

from

$45.99

The Budge Basic car cover offers single layer, basic protection against dust and debris – at a budget friendly price. Lightweight and easy to use, this vehicle cover is perfect for indoor use or occasional outdoor protection. The Budge Basic car cover is constructed from a single layer of polypropylene. This material is fully breathable to prevent mold and mildew. This cover is nonabrasive and will not harm your vehicle’s exterior. Our Budge Basic car covers are light gray in color. This is a suitable indoor and short term outdoor cover for your car. Our covers are available in a variety of sizes that will popular car makes and models. Cover includes a storage bag and antenna patch.

Product Features:

This car cover fits cars 200″ L x 60″ W x 51″ H
This car cover is suitable for indoor and short term outdoor storage
This vehicle cover features double stitched seams for added durability
A full elastic hem helps keep the car cover securely on your vehicle
Will defend against dust, dirt, bird droppings, tree sap and more

from

$159.99

Lightweight and thin, the special edition indoor stretch car cover from Budge is perfect for luxurious indoor protection against dust and air-borne pollutants. Silky to the touch with a soft fleece lining this vehicle cover stretches and conforms to the curves of your vehicle for a custom-like fit. This indoor car cover is ideal for long-term vehicle storage and garage kept vehicles. The thickness of the auto cover helps keep out dust and other indoor environmental hazards. The indoor stretch material is completely nonabrasive and will not scratch your vehicles surface. This cover is available in red, silver gray or black. A storage bag included for when not protecting your vehicle. Our covers are available in a variety of sizes that will popular car makes and models.

Product Features:

This car cover fits cars 200″ L x 60″ W x 51″ H
This indoor vehicle cover is made from a stretchable material conforms to you car
Extremely soft fleece lining to protect your car from scratches
This auto cover is suitable for indoor use or for garage kept vehicles
This car cover fits vehicles like: Ford Mustang, Chevrolet Corvette Stingray Coupe, Chevrolet Corvette, Ford Thunderbird, Honda Civic

from

$109.99

The Rightline Gear Sport Jr Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport Jr is the only car top bag made specifically for compact cars.

Product Features:

Capacity: 10 cu ft
Dimensions: 36″ L x 30″ W x 16″ H
Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

from

$119.99

The Rightline Gear Sport 2 Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport 2 is a popular size for many travelers.

Product Features:

Capacity: 15 cu ft
Dimensions: 42″ L x 34″ W x 18″ H
Designed for SUVs, minivans, and crossovers, WITH or WITHOUT a roof rack
100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

from

$50.99

New Standard Replacement Undercar Shield, With Aluminum Pin For AWD Sedan Models

Product Features:

With Aluminum Pin For AWD Sedan Models, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$23.99

New Standard Replacement Undercar Shield, Sedan/Wagon/Coupe

Product Features:

Sedan/Wagon/Coupe, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$43.99

This license plate bracket is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this license plate bracket matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bracket is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$184.99

Cargo Area Liner are custom patterned protection for your vehicle cargo area. Protect your OE carpet from spills and stains with this easy to install liner. Constructed of durable waterproof urethane-coated polyester fabric. Both the cargo area and the back of rear seat are covered and protected. Adjustable straps and side-release buckles attach around the vehicle headrests. Designed to allow split seat backs to work in the up or down position. Comes with a bumper flap that easily pulls out from underneath when needed.

Product Features:

Patterned protection for your vehicle cargo area
Easy to install
Durable waterproof urethane-coated polyester fabric
Both the cargo area and the back of rear seat are covered and protected
Adjustable straps and side-release buckles attach around the vehicle headrests
Designed to allow split seat backs to work in the up or down position
Comes with a bumper flap that easily pulls out from underneath when needed

from

$184.99

Patterned protection for your vehicle cargo area
Easy to install
Durable waterproof urethane-coated polyester fabric
Both the cargo area and the back of rear seat are covered and protected
Adjustable straps and side-release buckles attach around the vehicle headrests
Designed to allow split seat backs to work in the up or down position
Comes with a bumper flap that easily pulls out from underneath when needed

from

$184.99

Patterned protection for your vehicle cargo area
Easy to install
Durable waterproof urethane-coated polyester fabric
Both the cargo area and the back of rear seat are covered and protected
Adjustable straps and side-release buckles attach around the vehicle headrests
Designed to allow split seat backs to work in the up or down position
Comes with a bumper flap that easily pulls out from underneath when needed

from

$184.99

Patterned protection for your vehicle cargo area
Easy to install
Durable waterproof urethane-coated polyester fabric
Both the cargo area and the back of rear seat are covered and protected
Adjustable straps and side-release buckles attach around the vehicle headrests
Designed to allow split seat backs to work in the up or down position
Comes with a bumper flap that easily pulls out from underneath when needed

BMW 328Xi Interior Products

from

$321.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$255.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$106.99

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

Made of soft elegant rich velour
Custom made to fit each dashboard
Hook & loop fasteners included for easy & secure installation
Cuts hazardous windshield glare
Protects dashboard from sun damage stopping cracks and warping
Passenger-side airbag opening included where applicable

from

$101.99

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

Soft foss fiber carpet won’t fray or unravel
Custom fit to the dashboard of your vehicle
Helps prevent dashboard warping and cracking
Reduces hazardous windshield glare
Passenger-side airbag opening included where applicable
Hook and loop fasteners included for easy secure installation

from

$112.99

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

The rich appearance and feel of suede-like fabric
Custom tailored for a precise, snug fit
Protects your dash from sun damage and reduces windshield glare
Vents, sensors and trays remain fully functional
Simple installation with hook and loop fasteners

from

$106.99

Made of soft elegant rich velour
Custom made to fit each dashboard
Hook & loop fasteners included for easy & secure installation
Cuts hazardous windshield glare
Protects dashboard from sun damage stopping cracks and warping
Passenger-side airbag opening included where applicable

from

$106.99

Made of soft elegant rich velour
Custom made to fit each dashboard
Hook & loop fasteners included for easy & secure installation
Cuts hazardous windshield glare
Protects dashboard from sun damage stopping cracks and warping
Passenger-side airbag opening included where applicable

from

$321.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$159.99

The Accelerator Pedal Position (APP) sensor provides a signal identifying the location of the accelerator pedal to the engine control module. As the vehicle operator requests various degrees of torque from the engine the signal from the sensor provides the engine computer the necessary information to implement the request. The sensor provides two positive slope signals that have an offset voltage range and increase at different rates, the two signals from the sensor provide the engine computer with two unique signal inputs ensuring safety should one signal fail.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$144.99

Lightweight For Strength and Styling
Directs Frontal Air Into Intake System For Max. Performance
No Cutting Or Drilling On OEM Parts
Fast Installation

Looking for the best BMW 328Xi aftermarket replacement parts? Replacing worn and broken parts on your BMW 328Xi? Check out our online catalog to find the best selection of aftermarket BMW 328Xi parts as well as real user reviews on BMW 328Xi replacement parts. Make an informed decision about every component you add to your 328Xi.

At Advance Auto, we’ve got you covered when it comes to getting your BMW 328Xi in tip top condition. We’ve got over 1,009 BMW 328Xi parts to choose from in popular categories like Body Parts, Transmission Parts and Clutch Systems. If you’re looking for the best prices, try searching our BMW 328Xi parts catalog to compare OEM and aftermarket parts for your BMW 328Xi.

Whether you need BMW 328Xi body parts, interior components, or custom BMW 328Xi parts you can find them online at Advance Auto. Want to order your Automotive Accessories online? Or maybe you need your BMW Interior Products same day? No problem, you can pick up 328Xi parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used BMW 328Xi parts has never been easier.

Advance Auto customers frequently search for the following types of BMW 328Xi auto parts. Check out customer reviews and ratings, and compare prices on the following BMW 328Xi parts:

People also search Advance Auto for these popular years of the BMW 328Xi:

BMW 328Xi Parts

Carquest Premium – Door Window Switch (Part No.WSC2392)

Rein – Suspension Bump Stop (Part No.AVZ0293P)

KAI – Fender Liner (Part No.BM1248100)

Dorman – Hood Release Cable Assembly (Part No.912-470)

Dorman – Integrated Door Lock Actuator (Part No.937-866)

KAI – Passenger Side Front Fender Splash Shield, Rear Half Of 2 Piece, Sedan And Wagon (Part No.BM1251110)

KAI – Front Bumper Center Grille, Without Adaptive Cruise Control (Part No.BM1036111)

K-Source – Passenger Car Replacement Mirror: Passenger Side, Convex, Includes Backing Plate (Part No.30274)

KAI – Passenger Side Grille, Chrome/Black (Part No.BM1200165)

KAI – Bumper Impact Strip (Part No.BM1157119)

K-Source – Passenger Car Replacement Glass: Driver Side, Flat Glass, Includes Mounting Tape and Instructions (Part No.99274)

aFe POWER – Dynamic Air Scoop (Part No.54-11478-R)

Burco – SIDE VIEW MIRROR (Part No.4267)

AISIN – Power Window Regulator Assembly without Motor (Part No.RPB-013)

Dorman – Power Window Regulator and Motor Assembly (OE Fix) (Part No.748-469)

KAI – Bumper Cvr Reflector (Part No.BM1084102C)

KAI – Fender (Part No.BM1241138V)

Covercraft – Custom Hood Protector (Part No.45024-01)

Le Bra – Front End Cover, Vinyl, Black (Part No.551146-01)

Dorman – Integrated Door Lock Actuator (Part No.937-800)

Dorman – Integrated Door Lock Actuator (Part No.937-824)

Dorman – Integrated Door Lock Actuator (Part No.937-801)

StrongArm – Hood Lift Support: 15.58" Ext Length, 5.75" Travel, 79 Lbs of Force, 1 Pk (Part No.E6650)

StrongArm – Trunk Lift Support: 14.5" Ext Length, 4.0" Travel, 78 Lbs of Force, 1 Pk (Part No.E6651)

URO Parts – Trunk Strut (Part No.51247250308)

Carquest Premium – Automatic Transmission Speed Sensor (Part No.SNA1567)

URO Parts – Transfer Case Mount (Part No.22316773125)

Rein – Bushing (Part No.AVB0485)

National – Multi-Purpose Seal (Part No.710830)

Carquest Premium – Neutral Safety Switch (Part No.CSC3714)

National – Tapered Roller Bearing Cone (Part No.LM503349A)

National – Redi-Sleeve (Part No.99204)

URO Parts – O-Ring, 14.5mm x 2.5mm thick (Part No.17111711987)

Felpro – Transmission Oil Pan Gasket: 17 Bolt Hole, One Piece Gasket (Part No.TOS 18785)

Moveras – M02095 Remanufactured 6L45 Automatic Transmission Assembly (Part No.M02095)

Moveras – M02093 Remanufactured 6L45 Automatic Transmission Assembly (Part No.M02093)

Rein – Transmission Oil Pan Screw Kit (Part No.HWK0070)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.10089)

Carquest Premium – Clutch Pedal Position Switch (Part No.NSA1067)

National – Multi-Purpose Seal (Part No.710545)

Driveworks – Tapered Roller Bearing (Part No.S-LM-503349A)

Dorman – Transmission Pan with Drain Plug, Gasket and Bolts (OE Fix) (Part No.265-851)

Carquest Premium – Back Up Light Switch (Part No.SBA4528)

LuK – Dual Mass Flywheel (Part No.DMF082)

LuK – Clutch Kit: 9 7/16" Disc Diameter, 1 1/8" Input Shaft Diameter, 22 Tooth Spline (Part No.03-071)

LuK – Slave Cylinder, Clutch (Part No.LSC579)

LuK – Master Cylinder, Clutch (Part No.LMC454)

National – Multi-Purpose Bearing (Part No.102-CC)

WeatherTech – Molded Fit, Raised Channels With A Lower Reservoir, Black, 2 Piece (Part No.441462)

Kat’s – Engine Heater; Replacement Cord (Part No.28400)

Covercraft – UVS100 Custom Sunscreen – Blue Metallic (Part No.UV11010BL)

Covercraft – UVS100 Custom Sunscreen – Blue Metallic (Part No.UV10971BL)

Covercraft – UVS100 Custom Sunscreen – Silver (Part No.UV11010SV)

Budge – Ultra Car Cover, Gray, Size 3: Fits up to 16’8" L, 3 Layers, Water Resistant, Scratchproof, Dustproof (Part No.D-3)

Budge – Rain Barrier Car Cover, Grey Size 3: Fits Cars up to 200 in. L, Outdoor Protection (Part No.RSD-3)

Budge – Budge Basic Car Cover, Gray, Size 3: Fits up to 16’8" L, Scratch Resistant, Breathable, Dustproof (Part No.B-3)

Budge – Indoor Stretch Car Cover, Red Size 3: Fits Up To 16’8" L, Soft Inner Lining (Part No.RSC-3)

Rightline Gear – Sport Jr. Car Top Carrier (Part No.100S50)

Rightline Gear – Sport 2 Car Top Carrier (Part No.100S20)

KAI – Undercar Shield, With Aluminum Pin For Awd Sedan Models (Part No.BM1228118)

KAI – Undercar Shield (Part No.BM1228117)

Dorman – Help – License Plate Bracket (Part No.68199)

Covercraft – Cargo Area Liner (Part No.PCL6230TP)

Covercraft – Cargo Area Liner (Part No.PCL6230BK)

Covercraft – Cargo Area Liner (Part No.PCL6230TN)

Covercraft – Cargo Area Liner (Part No.PCL6230GY)

Carquest Premium – Instrument Panel Dimmer Switch (Part No.SAC3189)

Carquest Premium – Instrument Panel Dimmer Switch (Part No.SAC3163)

Dashmat – VelourMat Dashboard Cover, Beige (Part No.71687-01-23)

Dashmat – Dashboard Cover Soft Foss Fibre Carpet Grey (Part No.1687-00-47)

Dashmat – SuedeMat Dashboard Cover Faux-suede Material – Smoke (Part No.81687-00-76)

Dashmat – VelourMat Dashboard Cover, Gray (Part No.71687-00-47)

Dashmat – VelourMat Dashboard Cover, Gray (Part No.71687-01-47)

Carquest Premium – Instrument Panel Dimmer Switch (Part No.SAC2777)

Carquest Premium – Accelerator Pedal Sensor (Part No.PPE1383)

aFe POWER – Dynamic Air Scoop (Part No.54-11478-L)