BMW 328i xDrive Engine Parts

The original equipment VVT eccentric shaft sensor on certain vehicles typically fails due to seepage in spot welds. This Dorman OE FIX replacement sensor is designed with a stronger ultrasonic weld to prevent oil contamination.

Product Features:

• Upgraded design – this replacement VVT eccentric shaft sensor features ultrasonic welds to increase durability
• Failure-resistant construction – made to prevent common failure from oil intrusion in original equipment spot welds
• Application specific – made for certain BMW model years
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

Rein OE Quality valve covers are designed and manufactured to be direct replacements for OE units. Rein valve covers have identical dimensions as genuine valve covers. Rein valve covers are manufacturered to strickt engineering standards using high quality materials to prevent leaks and warping.

Product Features:

• Direct Replacement.
• Supplied with installation hardware for easy replacement.
• Manufactured from high quality materials to ensure a long service free life.
• Supplied with high quality gasket to prevent leaks
• Supplied with integrated breather valve.

The Original Equipment Engine Coolant Temperature Sensor is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium Original Equipment replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

This BladeRunner Intercooler represents the next generation of intercoolers. Designed specifically for the 2012-2016 BMW 328i (F3X) 12-16 L4-2.0L (t) with the N20 engine, this BladeRunner intercooler utilizes a 5″ bar and plate core design. This design outflows the factory fin core design, while the 3/16″ TIG-Welded end tanks offer superior strength and durability. In testing, this intercooler showed flow gains up to 17% and lowered the intake air temperatures. End Tanks: The unique BladeRunner end tanks are constructed out of 3/16″ thick aluminum plates and include two 1/8″ NPT ports for sensors or water-methanol injection. 5″ Bar and Plate Core Design: The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the much smaller tube and fin design used by the factory. TIG-Welded: 100% TIG-Welded inside and out by a certified craftsmen for strength and durability. TIG-Welding provides the strongest welds while reducing stress cracks. Pressure Tested: The BladeRunner Intercooler is test pressure rated at 200psi. Perfect Fit: Utilizes the factory mounting locations for a hassle-free installation. The intercooler and tubes utilize billet factory style quick connects to assure a leak-free connection.

Product Features:

• Outflows Factory Intercooler By 17%
• Lowers Manifold Intake Air Temperature
• 2.5 in. Billet Aluminum Intake/Outlet
• Incorporates Factory Style Quick Connections For Tubes

Carquest Premium crankshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Engineered with technology that provides increased accuracy with a stronger, more consistent signal
• Sensors are based on proven hall effect and variable reluctance technology
• Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
• O-rings and seals are included if required.
• Weather-tight connectors prevent leaks and corrosion for better reliability.
• Extensive design validation testing and 100% end-of-line tested.
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Our high-quality valve train components are built to handle the hotter temperatures and higher pressure of increasingly smaller engines. These repair solutions can meet growing demands on the combustion process and help increase engine service life.

Rein OE quality bolts kits fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for the original bolts are identical to OEM. Supplied with all the necessary bolts and torque specs to ensure that the job is done right.

Product Features:

• Includes all the bolts needed to complete the job.
• Includes torque specs to make sure each bolt is properly tighten.
• Manufactured to strict engineering standards/specifications in materials and tolerances.
• Aluminum bolts are torque to yield and must be replaced once they are released.

Rein OE quality valve cover kits are designed and manufactured to be direct replacements for OE units. Kits contain common failure items including breather hoses, oil caps and hardware that need to be changed when the valve cover is replaced. . Rein valve covers have identical dimensions to the genuine parts. Rein valve covers are manufactured to strict engineering standards using high quality materials to prevent leaks and warping.

Product Features:

• Direct Replacement.
• Kitted with installation components ensuring easy replacement including hardware, oil cap and breather hoses.
• Manufactured from high quality materials to ensure a long service free life.
• Supplied with high quality gasket to prevent leaks.
• Supplied with integrated breather valve.
• Kitted with eccentric shaft sensor that should be replaced when the valve cover is changed.

Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:

• Provides proper seal to ensure leak prevention
• Stops engine blow by
• High quality construction
• Meets all OEM specifications

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Built to meet or exceed the standards of original equipment manufacturers around the world and avoid comebacks Victor Reinz oil pan gaskets deliver the seal that prevents drops on the driveway. Victor Reinz engineers select the best designs and materials for the specific application. The level of sophistication in oil pan gasket form and function has jumped greatly in recent years, with the gasket often being an integral part of the manufacturers efforts to control engine noise, vibration, and harshness (NVH). Only a company with innovative gasket technology can supply the right gasket for every application, new or old.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Unsurpassed quality you can trust
• Validated for fit, form and function
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

This turbocharger oil line is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this turbocharger oil line matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this oil line is a reliable replacement for an original part that is leaking or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Rotomaster remanufactured Turbochargers are available for a vast array of automotive applications to meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every Rotomaster turbocharger has been designed and tested to guarantee O.E. fit and performance. Rotomaster is committed to getting your vehicle back on the road and back to peak performance with these remanufactured, direct-replacement turbochargers.

Product Features:

• All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
• Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment.
• All components are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
• 100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
• Each unit comes with a pre-lube syringe to ensure product protection during installation.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

Our high-quality valve train components are built to handle the hotter temperatures and higher pressure of increasingly smaller engines. These repair solutions can meet growing demands on the combustion process and help increase engine service life.

Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

Product Features:

• Multi-Ply Reinforced High Temp Silicone
• Allows For Expansion
• Leak-Free Seal

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to BMW 11-21;. Please verify your application.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2011-2021
• Weight approx: 2 Lbs
• HYDRAULIC

TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:

• OE Quality
• Optimized for strength
• Heat and corrosion resistant
• Chromium plated or nitrided
• Stem optimized to resist wear

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
• SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
• MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
• UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Application specific design to ensure a perfect fit
• Meets or exceeds all original equipment specifications
• Engineered and manufactured specifically for repair applications
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
• SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
• EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
• REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

The engine lubrication system is critical to engine operation and long life. On some vehicle applications, the engine control module monitors the engine oil level to ensure lubrication is not lost.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.