BMW 328i Intercoolers

End Tanks: The unique BladeRunner end tanks are constructed out of 3/16″ thick aluminum plates and include two 1/8″ NPT ports for sensors or water-methanol injection. 5″ Bar and Plate Core Design: The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the much smaller tube and fin design used by the factory. TIG-Welded: 100% TIG-Welded inside and out by a certified craftsmen for strength and durability. TIG-Welding provides the strongest welds while reducing stress cracks. Pressure Tested: The BladeRunner Intercooler is test pressure rated at 200psi. Mandrel-bent Tubing: Constructed of 2-1/2″ to 3″ mandrel-bent aluminum tubing and powder-coated wrinkle-black for heat and corrosion resistance. The smooth transition mandrel bends decrease turbulence which increases horsepower and torque. The high-temp wrinkle-black powder-coating insulates the tubes from engine heat and protects them from corrosion. aFe Badging: Unique aluminum laser-cut aFe Power logo plate is welded-on for an aggressive style. Perfect Fit: Includes stainless steel clamps for a leak-free seal and heavy-duty 5-Ply reinforced silicone coupling for strength.

Product Features:

• Outflows Factory Intercooler by 21%
• Lowers Intake Air Temperature
• Incorporates Factory Style Quick Conn. For Intercooler Tubes
• 100% TIG-Welded For Strength And Durability

This BladeRunner Intercooler represents the next generation of intercoolers. Designed specifically for the 2016-2017 BMW M2 (F87) L6-3.0L (t) with the N55 engine, this BladeRunner intercooler utilizes a 5″ bar and plate core design. This design outflows the factory tube and fin core design, while the 3/16″ TIG-Welded end tanks offer superior strength and durability. In testing, this intercooler showed flow gains up to 15% and lowers the intake air temperatures. End Tanks: The unique BladeRunner end tanks are constructed out of 3/16″ thick aluminum plates and include two 1/8″ NPT ports for sensors or water-methanol injection. 5″ Bar and Plate Core Design: The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the much smaller tube and fin design used by the factory. Tig Welded: 100% TIG-Welded inside and out by a certified craftsmen for strength and durability. TIG-Welding provides the strongest welds while reducing stress cracks. Pressure Tested: e BladeRunner Intercooler is test pressure rated at 200psi. Perfect Fit: Utilizes the factory mounting locations for a hassle-free installation. The intercooler and tubes utilize billet factory style quick connects to assure a leak-free connection.

Product Features:

• Outflows Factory Intercooler by 15%
• Lowers Manifold Intake Air Temperature
• Incorporates Factory Style Quick Conn. For Intercooler Tubes
• 100% TIG-Welded For Strength And Durability

There are two forms of charge air cooling: direct cooling with the ambient air, or indirect cooling via the coolant to the ambient air. Indirect charge air cooling offers benefits in terms of package size and dynamic response and will play an increasingly important role in the future. This involves placing the charge air cooler very close to the engine rather than in the front end of the vehicle. The additional low-temperature radiator needed for indirect charge air cooling is an integral part of the cooling module. Due to the smaller installation depth of the low-temperature radiator compared to a conventional charge air cooler, more space is available in the front end, which can then be used for various measures such as pedestrian protection. The location close to the engine permits the use of shorter charge air lines, cutting the pressure loss by around 50%. The higher density of the cooled charge air and lower pressure loss means there is more air available to the engine for combustion. The result: improved engine responsiveness.

Product Features:

• Manufactured with the highest quality components to ensure product quality and durability
• Built with high density multi-louvered fins for maximum cooling efficiency
• All units are leak tested to ensure a damage-free unit at installation
• OE design to ensure exact fit, form and function for an easy installation

Designed, manufactured and thoroughly tested according to OE requirements. Nissens’ intercoolers are submitted to corrosion, vibration, pressure impulse, thermal expansion and thermal performance tests. Supreme thermal performance and extended lifespan thanks to a number of special features applied for Nissens’ intercoolers. Perfect finish and product fit, enabling a quick and smooth product installation.

Product Features:

• Tubes equipped with turbulators, ensuring better air flow and larger surface to exchange the heat.
• Compact fin construction with louvres increasing the heat exchange.
• Specially designed core end plates to minimize influence of the mechanical stress thus break-down.
• Plastic tanks designed with special reinforcing inner cross-bars and specially strengthened inlets and outlets.
• Specially designed side panels with cuts to lower the influence of thermal expansion on the core construction.
• Reinforced plastic tanks, enriched with at least 30-35% fibreglass.
• No recycled plastics are used.

Intercooler

New Platinum Pro Turbocharger Intercooler/Charge Air Cooler, 3.0 Liter L6 Turbo

Product Features:

• 3.0 Liter L6 Turbo, Made Of Plastic and Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Platinum Pro Turbocharger Intercooler/Charge Air Cooler, 2.0 Liter Turbocharged Engine

Product Features:

• 2.0 Liter Turbocharged Engine
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Rein Automotive OE quality coolant hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:

• Reduces installation time.
• No cutting, refitting or adjusting the hose.
• Prevents leaks and comebacks from reusing old quick connectors and o-rings.
• Resistant to heat, salt, road debris, oil and other contaminants.