BMW 328d Cooling and Climate Controls

Essential BMW 328d Cooling and Climate Controls

Carquest Premium – Coolant Temperature Sensor with O-Rings (Part No.WTC2193)

Coolant Temperature Sensor with O-Rings

from

$49.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Radiator (Part No.813571)

Radiator

from

$223.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
  • Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
  • OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
See More

KAI – Radiator Support Panel Brace, Center Brace, Made Of Aluminum (Part No.BM1225137C)

Radiator Support Panel Brace, Center Brace, Made Of Aluminum

from

$53.99
New CAPA Certified Standard Replacement Radiator Support Panel Brace, Center Brace, Made Of Aluminum

Product Features:
  • Center Brace, Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

ACM – Blower Motor Regulat (Part No.R2041447614ACM)

Blower Motor Regulat

from

$147.94
Blower Motor Regulat

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.714226)

A/C Condenser and Receiver Drier Assembly

from

$178.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
See More

ATE – ABS Speed Sensor (Part No.N60302394263ATE)

ABS Speed Sensor

from

$120.89
ABS Speed Sensor

Carquest Premium – HVAC Heater Core Temperature Sensor (Part No.WTA2112)

HVAC Heater Core Temperature Sensor

from

$57.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Autopart International Inc – A/C Compressor (Part No.R10003200251API)

A/C Compressor

from

$439.32
A/C Compressor

Dorman – Brass Coolant Air Bleeder Screw (Part No.902-404HP)

Brass Coolant Air Bleeder Screw

from

$8.79
This engine coolant bleeder screw has been manufactured from durable material to prevent cooling system leaks. Matches the original screw for fit and function.

Product Features:
  • Upgraded material – this brass coolant air bleeder screw reduces future maintenance costs by replacing the original equipment plastic screw on specified BMW, Mini, Chrysler, Dodge, Jeep, and Ram vehicles.
  • Ideal solution – instead of wasting time wrestling with a deformed plastic screw head, this sturdy brass screw ensures easy, reliable removal and reuse.
  • Durable construction – made of quality brass for reliable performance and long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – HVAC Heater Core (Part No.910708)

HVAC Heater Core

from

$147.99
Carquest Premium offers a complete line of automotive heaters covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heaters that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:
  • Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
  • Meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”.
  • Engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
See More

Carquest Premium – Coolant Reservoir Cap: T64, Threaded, Direct Fit, Provides Tight Seal, 1 Pack (Part No.T64)

Coolant Reservoir Cap: T64, Threaded, Direct Fit, Provides Tight Seal, 1 Pack

from

$27.99
Coolant Reservoir Cap: T64, Threaded, Direct Fit, Provides Tight Seal, 1 Pack

Behr – A/C Condenser (Part No.R1030660866BEH)

A/C Condenser

from

$258.28
BEHR manufactures an OE-equivalent direct fit A/C Condenser that guarantees the same high quality, fit and performance of the OEM A/C condenser it replaces. BEHR produces brazed flat-tube condensers, delivering high power in spite of their small package size. This ensures rapid cooling of the vehicle cabin, thanks to optimum matching of heat transfer and pressure drop on the coolant side and air side.

Product Features:
  • OE-Equivalent and Direct fit Application.
  • Advanced technology parallel flow, sub cool and serpentine design.
  • Provides the fit, quality and performance of the original equipment.
  • compliant for both R12 and R134A refrigerants.
See More

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1439)

HVAC Blower Motor Resistor

from

$204.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:
  • Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

Carquest Premium – New Compressor (Part No.T168368)

New Compressor

from

$558.99
Carquest Premium A/C compressors are 100% new units that are manufactured to the highest quality to meet or exceed OE specifications.

Product Features:
  • Every unit is 100% function and leak tested
  • Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
  • Very low friction coating used on swash plate to improve durability
  • PTFE coated pistons improve performance and reduce wear
  • Rubber dampened clutch plate ensures smooth clutch engagement and reduces wear
  • Matched high-quality needle-roller bearing ensures low friction and high load capability
  • Limited Lifetime Warranty when following warranty requirements: Flush A/C System, replace accumulator/receiver dryer, replace orifice tube/expansion device, and filling with correct oil and refrigerant
See More

Carquest Premium – A/C Filter Drier withPad Mount (Part No.T83153)

A/C Filter Drier withPad Mount

from

$68.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Imperial – Electric Fan – 10" Diameter (Part No.226110)

Electric Fan - 10" Diameter

from

$67.99
Electric fan with 10″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:
  • Rapid-Cool® Thin-Line electric fans
  • 10″ Diameter
  • 650 CFM
  • Use as a pusher or puller fan
See More

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Thermostatic Fan Control - Adjustable

from

$62.99
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Adjustable thermostatic fan control
  • 160°F – 210°F thread-in probe
  • For use with Imperial electric fans
  • Thread-in probe for installation in water jacket or radiator
See More

Original Equipment – Coolant Level Sensor (Part No.G1050335088OEA)

Coolant Level Sensor

from

$27.06
Coolant Level Sensor

Geba – Water Pump (Part No.G3000653649GEB)

Water Pump

from

$165.58
The GEBA Water Pump contains no remanufactured components and is manufactured to ensure high efficiency and optimal cooling under all conditions. Geba maintenance free Bearings with ball and roller spindle bearings are designed for the highest axial and radial stresses. Up to Date unitized sealing technology ensure optimal leak tightness and longevity. All housings are examined before the assembly. This procedure guarantees high reliability and life span of GEBA water pumps.

Product Features:
  • OE-Equivalent and direct fit application.
  • 100% new with no remanufactured parts.
  • High quality cast aluminum.
  • Advanced bearing design for high axial and radial stresses.
  • Unitized sealing technology that ensures optimal leak tightness and longevity.
  • Optimum cooling performance and longevity.
See More

KAI – Radiator Support (Part No.BM1225136C)

Radiator Support

from

$91.99
New CAPA Certified Standard Replacement Radiator Support Upper Support Panel, Made Of High Strength Steel

Product Features:
  • Made Of High Strength Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

from

$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Carquest Premium – Blower Motor: With Wheel (Part No.75064)

Blower Motor: With Wheel

from

$78.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

Behr – Blower Motor (Part No.R2031517534BEH)

Blower Motor

from

$240.21
Behr manufactures an OEM quality replacement Blower Motor that guarantees the same performance, fitment and durability as that of the original unit it replaces. Behr’s advanced blower design provides boosted airflow performance, are highly efficient, and quiet-running, which provides excellent acoustic comfort from the climate control system.

Product Features:
  • OEM Quality.
  • Direct Fit Replacement.
  • Highly efficient
  • Quiet-running
  • Meets or exceeds OE design and performance.
See More

Helping You Find the Right Cooling and Climate Controls for Your BMW 328d

You love your 328d. So we’ve made it easier than ever to help you find BMW 328d Cooling and Climate Controls in our online catalog. Our inventory holds 53 aftermarket and OEM Cooling and Climate Controls for your BMW 328d, ranging from $1.61 to $641.99.

We offer parts from 20 brands trusted to make quality Cooling and Climate Controls for your BMW 328d. Before you buy, take some time to read through customer reviews. We currently have 1,684 reviews of BMW 328d Cooling and Climate Controls from previous customers. Some of the top rated parts include Thermostatic Fan Control – Preset with 3.0 stars and Coolant Air Bleeder Screw with 3.4 stars.

Find your 328d Cooling and Climate Controls here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your BMW 328d part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Cooling and Climate Controls Brands for Your BMW 328d

Our inventory holds Cooling and Climate Controls for your BMW 328d from 20 trusted brands. You’ll find OEM and aftermarket parts from brands like Permatex, Imperial, and Dorman, all of which can keep that BMW happy.

FAQs for BMW 328d Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the BMW 328d?

Out of 53 Cooling and Climate Controls for the BMW 328d, the most popular in our inventory are:
Adjustable Thermostatic Fan Control
from $22.99
(35)
Adjustable Thermostatic Fan Control
Engine Cooling Fan Controllers
Adjustable Thermostatic Fan Control
from $55.99
(33)
Adjustable Thermostatic Fan Control
Engine Cooling Fan Controllers
Electric Fan - 10" Diameter
from $67.99
(14)
Electric Fan – 10" Diameter
Radiator Fan Motors

What are the top-rated BMW 328d Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your BMW 328d based on customer reviews/ratings are:
Thermostatic Fan Control - Preset
from $38.49
(8)
Thermostatic Fan Control – Preset
“I’ve been using this kit for several years on my off road truck. It’s hooked up to a powerful flex-a-lite fan and handles the load with ease. I have”
Coolant Air Bleeder Screw
from $4.99
(5)
Coolant Air Bleeder Screw
“Fixed the problem in 5mins….no more coolant leaking from my bleeder screw.”
Thermostatic Fan Control - Adjustable
from $62.99
(2)
Thermostatic Fan Control – Adjustable
“Need to find brass bushings to fit sensor to intake.Very easy to install!”