BMW 325E Engine Parts
Top BMW 325E Engine Parts Categories
We carry over 62 Engine Parts in inventory for the BMW 325E. If you’re looking for aftermarket Engine Parts for your BMW 325E, check out all these categories:
Essential BMW 325E Engine Parts
Driveworks – Oil Seal (Part No.S-3459)
from
$7.79
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Febi – Valve Adjust Bolt (Part No.A411939409FEB)
from
$2.69
Valve Adjust Bolt
National – Shaft Repair Sleeve (Part No.99157)
from
$37.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
TRW – Valve Keeper (Part No.A40701891730TRW)
from
$2.82
Valve Keeper
Carquest Premium – Coolant Temperature Sensor with Thread Sealant and Washer (Part No.WTC1057)
from
$27.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
APA/URO Parts – Tensioner Roller Bol (Part No.A526072673APA)
from
$8.43
Tensioner Roller Bol
National – Shaft Repair Sleeve (Part No.99189)
from
$38.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Felpro – Cylinder Head Gasket: Fiber-Faced Composite, Without Head Bolts (Part No.9397 B)
from
$90.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Validated for fit, form, and function
- Unsurpassed quality you can trust
Felpro – Cylinder Head Gasket Set (Part No.HS 9397 B)
from
$174.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
- Application specific design to ensure a perfect fit and premium seal
- Contains all the parts needed to complete the repair unless otherwise noted
- Contains all the parts needed to complete the repair unless otherwise noted
Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72682)
from
$28.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
- QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
- ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
- INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
- COVERAGE — Available for domestic and foreign nameplate vehicles
Felpro – Engine Valve Cover Gasket Set (Part No.VS 50279 B)
from
$32.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
- SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
Febi – Engine Oil Filler cap (Part No.A6140405527FEB)
from
$5.81
The Febi Oil FIller cap is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
INA – Timing Belt Tensioner (Part No.A5030850589INA)
from
$64.64
The INA Timing Belt Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application
- High quality sealed precision bearing assembly
- OE specified pulley
- Durable long life performance
Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA2999)
from
$306.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including thermal shock and vibration, with unparalleled reliability, durability, and accuracy.
Product Features:
See More
Product Features:
- Products are produced in ISO 14001 and IATF 16949 certified facilities to ensure the highest quality and consistency throughout the production process.
- Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
- Manufactured in an anti-static environment to ensure reliability and stability.
- Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
- Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
Febi – Valve Adjust Nut (Part No.A413039412FEB)
from
$1.58
Valve Adjust Nut
MTC – Rocker Shaft (Part No.A4110848763MTC)
from
$46.55
Rocker Shaft
Canyon Engine – Bronze Valve Guide (Part No.A306026995CEC)
from
$7.71
The Canyon Engine Valve Guide is manufactured using bronze material and is an exact duplication of the original equipment part. The valve guides are complete with the snap ring installed (Mercedes) and the correct color code indicating the oversize diameter.
Product Features:
See More
Product Features:
- OE Quality
- Same design as the original equipment part
- Manufactured from bronze material
- Complete with snap ring (Mercedes)
Dayco – Premium Timing Belt, 41.11 Inch With 127 Round Tooth (Part No.95131)
from
$20.99
Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.
Product Features:
See More
Product Features:
- Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
- Offers noise reduction and minimum dimensional tolerances for precise valve timing
- Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
- This specific belt is for applications with standard temperature and load requirements with a reinforced round tooth profile for more demanding drives
Dorman – Engine Oil Pan: Direct Fit, Aluminum, Rear Sump, 7 Quart (Part No.264-145)
from
$525.99
Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
- Complete assembly – includes replacement pan and drain plugs to match original components
- Durable design – high-strength coating prevents future corrosion
- Trustworthy value – backed by team of engineers and quality control experts in the United States
Felpro – Engine Conversion Gasket Set (Part No.CS 9397)
from
$94.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Validated for fit, form and function
- Unsurpassed quality you can trust
- Includes all the parts necessary to complete the repair unless otherwise noted
- Includes all the parts necessary to complete the repair unless otherwise noted
Flex A Lite – Oil Cooler Sandwich Adapter Kit (Part No.3961)
from
$42.99
Oil Cooler Sandwich Adapter Kit
Febi – Freeze Plug (Part No.A103014658FEB)
from
$3.02
Freeze Plug
KS – KS Rod Bearing Set (Part No.A203014872KS)
from
$61.64
KS rod bearing sets provide maximum load-bearing capacity, anti-seize and low wear and friction. KS rod bearing sets are manufactured with aluminum-tin sliding material and the innovative aluminum-zinc-bismuth alloy in which bismuth replaces lead. From the strands continuously cast on site, strip is generated in defined and coordinated rolling and annealing operations for subsequent cladding. The various steel-aluminum composites are finally produced by roll bonding. Innovative coatings also ensure optimal running-in behavior and low-wear continuous running. The spectrum of possible surface coatings at KS Gleitlager extends from galvanic films deposited electro-chemically and sputter layers applied electro-physically in a high vacuum, to synthetic antifriction coatings.
Product Features:
See More
Product Features:
- Original Equipment Manufacturer
- Maximum Load-Bearing Capacity
- Low Wear and Friction
- Advanced Surface Coatings
Febi – Valve Adjust Eccentr (Part No.A425039408FEB)
from
$8.30
Valve Adjust Eccentr
Dayco – Timing Belt Tensioner Kit: With Belt, Camshaft Belt Tensioner, 2 Pieces (Part No.95106K1)
from
$49.99
Dayco Timing Belt Kits are manufactured to meet the critical OE quality fit, form and function requirements demanded by both domestic and imported vehicle manufacturers to ensure long lasting peak performance. This Kit contains application specific instructions and extended warranty options.
Product Features:
See More
Product Features:
- Application specific instructions
- Eliminate the need to pay high automotive dealership prices
- Designed for replacement of worn or damaged OEM timing belts, idler pulleys, timing belt tensioners, and water pumps
- Meets or exceeds OE quality
BMW 325E Engine Parts Categories
Helping You Find the Right Engine Parts for Your BMW 325E
You love your 325E. So we’ve made it easier than ever to help you find BMW 325E Engine Parts in our online catalog. Our inventory holds 62 aftermarket and OEM Engine Parts for your BMW 325E, ranging from $1.50 to $525.99.
We offer parts from 25 brands trusted to make quality Engine Parts for your BMW 325E. Before you buy, take some time to read through customer reviews. We currently have 44 reviews of BMW 325E Engine Parts from previous customers. Some of the top rated parts include Shaft Repair Sleeve with 5.0 stars and Shaft Repair Sleeve with 2.0 stars.
Find your 325E Engine Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your BMW 325E part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Engine Parts Brands for Your BMW 325E
Our inventory holds Engine Parts for your BMW 325E from 25 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest Premium, National, and Driveworks, all of which can keep that BMW happy.
We have Elring parts available for your BMW 325E in categories like Camshafts. Some of the top-rated Elring parts in these categories are:
Top-Rated Carquest Premium Engine Parts
Leading Carquest Premium Engine Parts
We carry Carquest Premium brand parts for your BMW 325E across several catalog categories, including Engine Blocks. Some of our most reviewed Carquest Premium parts include:
from
$8.29
(4)
Engine Oil Filler Cap: 10079, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack
Oil Caps
FAQs for BMW 325E Engine Parts
What are the most purchased Engine Parts for the BMW 325E?
Out of 62 Engine Parts for the BMW 325E, the most popular in our inventory are:
from
$27.99
This product is not rated
Coolant Temperature Sensor with Thread Sealant and Washer
Cylinder Head Temperature Sensors
What are the top-rated BMW 325E Engine Parts?
Top-rated Engine Parts for your BMW 325E based on customer reviews/ratings are:
from
$39.49
(1)
Shaft Repair Sleeve
“Easy to use, too early to tell how long it will last. It did stop the oil leak with a new oil seal on the front crankshaft pulley. 87 mercedes 300td.”
