BMW 325Ci Control Arms

Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.

Product Features:

• Delphi control arms undergo 100% crack detection and ultrasonic flaw detection to ensure materials match OE specifications
• Control arms utilize robot welding for consistent performance and quality
• Delphi machines the ball studs to Micron tolerances to guarantee durability and smooth Joint operation
• Anti-corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Restores vehicle handling
• OE replacement
• Reduces vibration
• Reduces tire wear

Whiteline KTA255 for the BMW 1 Series, 3 Series, X1 and Z4 is a set of 4 arms to solve any front end issues you may have. Due to the high performance of many BMW models, the original rubber front control arm and radius arm bushings tend to take a beating, and have a limited service life. In addition many owners will lower their BMW with a lowering kit or coilovers and may have a front end geometry issue that needs correcting. For ease of fitment these alloy arms also come complete with adjustable synthetic elastomer bushings. These facilitate +/- 0.5 deg camber and separately caster. These two key alignment angles can help ensure you get the car set up for minimal tyre wear with maximum grip. The bushings are designed with internal knurling to ensure a reservoir for long-term lubrication with the supplied, extreme pressure molybdenum disulphide (LM) based grease for extended life. High strength ball joints are included with the arms to make this a fit and forget purchase compared to the short service life of the original and cheaper aftermarket alternatives.

Product Features:

• Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
• Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.

Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

• EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
• HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
• COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
• Construction and design validated by MOOG engineers
• Broad coverage for foreign and domestic applications
• R-Series (RK) products are the right choice for value-driven repair

Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.

The Lemfoerder control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

Product Features:

• OE-Equivalent and Direct fit for easy Installation.
• Manufactured using high quality OE materials.
• Includes factory specified hardware.

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

• EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
• HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
• COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
• Construction and design validated by MOOG engineers
• Broad coverage for foreign and domestic applications

Worn front control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency. Replace worn bushings to as new condition utilising Whiteline’s advanced synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory and outright durability for all forms of driving applications.

Product Features:

• Internal grease reservoirs provide continual self lubrication for optimum friction management.

Advanced Suspension Technology Control Arm Bushing offers a unique polyurethane alternative to conventional rubber suspension bushings. AST bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise. Polyurethane bushings are stronger and last longer than standard rubber bushings. Most modern production vehicles are designed using rubber bushings which have a limited lifespan. This contributes to suspension failure due to vehicular weight and the inherent design of high-tech suspensions. Typically this results in less than desirable vehicle handling and can cause many related parts to wear out more rapidly than necessary. Polyurethane corrects this problem and in many cases improves vehicle handling and drivability. Once removal of original bushings has taken place, installation of the new polyurethane bush typically takes from 1 – 5 minutes to install.

Product Features:

• Unique polyurethane alternative
• Sleeves in the bushings freely rotate which enhances longevity
• Impregnated with graphite to aid in lubrication and reduce noise
• Alternative to conventional rubber suspension bushings

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Reduces vibration
• Torsional rubber bushings
• UV resistant
• No Squeak

The Hutchinson Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

• OE-Equivalent and a direct fit application.
• Meets or exceeds the OE specifications.
• Designed to reduce vibration and absorb noise.

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

• HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
• PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
• OE-STYLE DESIGN — Engineered to match or exceed OE requirements
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• Bushings manufactured from high quality elastomer compounds for durability and ride performance
• Assembled with proper precompression for ultimate in performance and feel

Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your control arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.

Product Features:

• Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
• Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment bushing on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:

• All Rein Automotive control arm bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts performs like original.
• Matches Original Equipment design specifications
• Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
• Recommend to replace bushings in pairs to ensure best performance. Note: Control Arm Bushing Kits contain the needed pair.

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Reduces vibration
• Torsional rubber bushings
• UV resistant
• No Squeak

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Reduces vibration
• Torsional rubber bushings
• UV resistant
• No Squeak

The Lemfoerder Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

• OE-Equivalent and a direct fit application.
• Meets or exceeds the OE specifications.
• Designed to reduce vibration and absorb noise.

Worn front control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency. Replace worn bushings to as new condition utilising Whiteline’s advanced synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory and outright durability for all forms of driving applications.

Product Features:

• Internal grease reservoirs provide continual self lubrication for optimum friction management.
• Internal grease reservoirs provide continual self lubrication for optimum friction management.

Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your control arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.

Product Features:

• Internal grease reservoirs provide continual self lubrication for optimum friction management.
• Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
• Internal grease reservoirs provide continual self lubrication for optimum friction management.

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Reduces vibration
• Torsional rubber bushings
• UV resistant
• No Squeak

Whiteline camber kits provide the ability to fine tune camber settings for optimum tyre contact resulting in improved vehicle handling and increased tyre life. This kit is supplied with dual offset Whiteline synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory and outright durability which help maintain preferred alignment settings as well as providing enhanced steering response.

Product Features:

• Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
• Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.