Audi S4 Steering and Chassis Parts
Top Audi S4 Steering and Chassis Parts Categories
We carry over 145 Steering and Chassis Parts in inventory for the Audi S4. If you’re looking for aftermarket Steering and Chassis Parts for your Audi S4, check out all these categories:
Essential Audi S4 Steering and Chassis Parts
Driveworks – Steering Tie Rod End (Part No.DW-ES3646)
from
$21.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
- A slotted nut and cotter pin for a more secure installation
Rein – Sway Bar Link Kit (Part No.SCL0273R)
from
$40.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.
See More
Carquest Premium – Power Steering Return Hose Assembly, 16mm Banjo x 3/8" I.D. Hose (Part No.40287)
from
$73.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
Product Features:
See More
Product Features:
- Zinc coated tubes protect against rust and corrosion
- Banjo end lock tabs prevent hose end from loosening
Carquest Premium – Power Steering Pressure Hose, 16mm Banjo x 16mm Female S.A.E. (Part No.40410)
from
$134.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
Product Features:
See More
Product Features:
- Switch sockets allow re-installation of OE pressure sensors
- Zinc coated tubes protect against rust and corrosion
- Banjo end lock tabs prevent hose end from loosening
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Heat/abrasion tubing protects vital areas
- Restrictor helps absorb vibration and reduce noise
- Movable mount bracket for easy, secure installation
- Silver heat guard protects hose in high heat areas
- Original style fittings, no adapters required
Dorman – Lower Steering Shaft (Part No.425-875)
from
$548.99
This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.
Product Features:
See More
Product Features:
- Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
- Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
- Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
- Corrosion resistant – salt spray testing and premium coating help ensure future longevity
Rare Parts – Control Arm W/ Ball Joint (Part No.RP11281)
from
$124.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
Rare Parts – Sway Bar Link (Part No.RP19896)
from
$75.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Dorman – Alignment Caster / Camber Control Arm (Part No.528-203)
from
$461.99
This replacement caster camber control arm is adjustable to allow for proper wheel alignment, such as after collision repairs, and for vehicles with modified suspensions or aftermarket wheels.
Product Features:
See More
Product Features:
- Direct replacement – this control arm matches the geometry of the factory part and allows for fine adjustments required for proper wheel alignment
- Ideal solution – adjustable replacement for an original control arm that can no longer ensure correct alignment after collision repairs, suspension modifications or the installation of aftermarket wheels
- Durable construction – this part is made from quality materials for reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Steering Rack and Pinion Bellows Kit (Part No.541-501)
from
$41.99
Steering Rack and Pinion Bellows Kit
Rare Parts – Tie Rod End (Part No.RP27994)
from
$99.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Carquest Premium – New Power Steering Pump – Hydraulic (Part No.990-1001CQN)
from
$295.99
Premium-quality new power steering pump designed for dependability and reliability throughout the service life of the vehicle.
Product Features:
See More
Product Features:
- All critical components are built to strict manufacturing specifications, which eliminates critical component failure that causes noise and leaks
- Exterior surfaces are finished with corrosion and rust resistant coatings to ensure an extended service life
- All components are 100% new and functionally tested to meet or exceed OE specifications for extended reliability
- Power steering pulley and reservoir included (when applicable) which eases installation and eliminates contamination in the system
PWR – New Hydraulic Power Rack and Pinion (Part No.42-1091)
from
$763.99
Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function
Product Features:
See More
Product Features:
- PWR Rack and Pinions are 100% NEW and Engineered In North America
- All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
- Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Tie Rod and Pinion Shaft Thread Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
- Includes: Factory Installed OE Mounting Bracket, Precision Routed Fluid Transfer Lines, required Installation Seals, Hardware, and Instructions
- Precision Routed and Constructed Fluid Transfer Tubes
- Manufactured to meet or exceed OE requirements
- Engineering, test, and quality validation in the USA
Rare Parts – Tie Rod Assembly (Part No.RP29140)
from
$199.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with inner and outer tie rod ends
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Whiteline – Front Radius Arm Lower – Bushing Kit Double Offset Caster Kit (Part No.KCA422)
from
$67.99
Whiteline caster kits are designed to improve cornering grip and vehicle straight line stability through increased static caster and dynamic negative camber gain. In addition, synthetic elastomer bushings provide improved steering feedback and braking performance.
Product Features:
See More
Product Features:
- Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Specially bonded design for optimised strength typically required in high load bearing applications.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Specially bonded design for optimised strength typically required in high load bearing applications.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Carquest Premium – Power Steering Filter (Part No.991-FLT1CQN)
from
$13.99
Product Features:
See More
- Contains a powerful magnet which removes 99% of contaminants at filter entry point
- Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
- Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
- Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models
MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K201343)
from
$11.79
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
Rare Parts – Sway Bar Bushing (Part No.RP19236)
from
$36.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Powercraft – Rack Pinion Seal Kit (Part No.8917)
from
$102.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Dorman – SUBFRAME BUSHING (Part No.537-865)
from
$40.99
SUBFRAME BUSHING
Rare Parts – Strut Rod Bushing (Part No.RP16982)
from
$34.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Reduces tire wear
- Improves handling while breaking
- Aids in alignment of vehicle
Rare Parts – Ball Joint (Part No.RP11895)
from
$109.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
MOOG – Suspension Ball Joint (Part No.K500225)
from
$139.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Carquest Premium – Ball Joint (Part No.410-507812)
from
$22.49
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
MOOG – Suspension Ball Joint (Part No.K500252)
from
$48.49
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- Easy to install.
- Construction and design validated by MOOG engineers
- Restores like-new steering and handling
- Designed to meet or exceed original equipment performance
- Broad coverage for foreign and domestic applications
- Engineered to provide long life and dependability
Audi S4 Steering and Chassis Parts Categories
Helping You Find the Right Steering and Chassis Parts for Your Audi S4
You love your S4. So we’ve made it easier than ever to help you find Audi S4 Steering and Chassis Parts in our online catalog. Our inventory holds 145 aftermarket and OEM Steering and Chassis Parts for your Audi S4, ranging from $5.99 to $763.99.
We offer parts from 13 brands trusted to make quality Steering and Chassis Parts for your Audi S4. Before you buy, take some time to read through customer reviews. We currently have 2,059 reviews of Audi S4 Steering and Chassis Parts from previous customers. Some of the top rated parts include Suspension Control Arm & Ball Joint Assembly with 5.0 stars and Steering Tie Rod End with 4.0 stars.
Find your S4 Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Audi S4 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Steering and Chassis Parts Brands for Your Audi S4
Our inventory holds Steering and Chassis Parts for your Audi S4 from 13 trusted brands. You’ll find OEM and aftermarket parts from brands like Cardone, Driveworks, and Moog, all of which can keep that Audi happy.
We have Dorman parts available for your Audi S4 in categories like Ball Joints. Some of the top-rated Dorman parts in these categories are:
Top-Rated Cardone Steering and Chassis Parts
Leading Cardone Steering and Chassis Parts
We carry Cardone brand parts for your Audi S4 across several catalog categories, including Power Steering Parts. Some of our most reviewed Cardone parts include:
FAQs for Audi S4 Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the Audi S4?
Out of 145 Steering and Chassis Parts for the Audi S4, the most popular in our inventory are:
What are the top-rated Audi S4 Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your Audi S4 based on customer reviews/ratings are:
from
$103.99
(1)
Suspension Control Arm & Ball Joint Assembly
“good quality looks like factory original”
from
$49.49
(1)
Steering Tie Rod End
“Needed to get inner tie rod ends since the outers decided to become one with the inners on my 2002 Passat. Advanced had the best price for in stock t”
from
$77.99
(1)
Suspension Control Arm & Ball Joint Assembly
“This didn’t fit my car which was a 2004 Audi A6 Quattro 3.0
Didn’t fit correctly
There are two different sizes of balljoint, one made for the knuckle”
