Audi A5 Quattro Intercoolers

New Platinum Pro Turbocharger Intercooler/Charge Air Cooler, 2.0 Liter L4 Engine Turbo

Product Features:

• 2.0 Liter L4 Engine Turbo, Made Of Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Platinum Pro Turbocharger Intercooler/Charge Air Cooler Driver Side, 3.0 LITER V6 TDI

Product Features:

• 3.0 LITER V6 TDI, Made Of Plastic and Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

There are two forms of charge air cooling: direct cooling with the ambient air, or indirect cooling via the coolant to the ambient air. Indirect charge air cooling offers benefits in terms of package size and dynamic response and will play an increasingly important role in the future. This involves placing the charge air cooler very close to the engine rather than in the front end of the vehicle. The additional low-temperature radiator needed for indirect charge air cooling is an integral part of the cooling module. Due to the smaller installation depth of the low-temperature radiator compared to a conventional charge air cooler, more space is available in the front end, which can then be used for various measures such as pedestrian protection. The location close to the engine permits the use of shorter charge air lines, cutting the pressure loss by around 50%. The higher density of the cooled charge air and lower pressure loss means there is more air available to the engine for combustion. The result: improved engine responsiveness.

Product Features:

• Manufactured with the highest quality components to ensure product quality and durability
• Built with high density multi-louvered fins for maximum cooling efficiency
• All units are leak tested to ensure a damage-free unit at installation
• OE design to ensure exact fit, form and function for an easy installation

New Platinum Pro Turbocharger Intercooler/Charge Air Cooler, 3.0 Liter V6 Turbo Diesel

Product Features:

• 3.0 Liter V6 Turbo Diesel, Made Of Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Designed, manufactured and thoroughly tested according to OE requirements. Nissens’ intercoolers are submitted to corrosion, vibration, pressure impulse, thermal expansion and thermal performance tests. Supreme thermal performance and extended lifespan thanks to a number of special features applied for Nissens’ intercoolers. Perfect finish and product fit, enabling a quick and smooth product installation.

Product Features:

• Tubes equipped with turbulators, ensuring better air flow and larger surface to exchange the heat.
• Compact fin construction with louvres increasing the heat exchange.
• Specially designed core end plates to minimize influence of the mechanical stress thus break-down.
• Plastic tanks designed with special reinforcing inner cross-bars and specially strengthened inlets and outlets.
• Specially designed side panels with cuts to lower the influence of thermal expansion on the core construction.
• Reinforced plastic tanks, enriched with at least 30-35% fibreglass.
• No recycled plastics are used.

All turbocharged or supercharged engines require a functional and efficient intercooler, or “Charge Air Cooler”, to maintain proper air intake temperatures. TYC has addressed this market need by introducing vehicle specific, OE-like replacement intercoolers. They are designed to provide similar cooling surface area as the OE, to ensure it works seamlessly with the rest of the engine for maximum fuel efficiency.

Product Features:

• Manufactured with the highest quality components to ensure product quality and durability
• Built with high density multi-louvered fins for maximum cooling efficiency
• All units are leak tested to ensure a damage-free unit at installation
• OE design to ensure exact fit, form and function for an easy installation

There are two forms of charge air cooling: direct cooling with the ambient air, or indirect cooling via the coolant to the ambient air. Indirect charge air cooling offers benefits in terms of package size and dynamic response and will play an increasingly important role in the future. This involves placing the charge air cooler very close to the engine rather than in the front end of the vehicle. The additional low-temperature radiator needed for indirect charge air cooling is an integral part of the cooling module. Due to the smaller installation depth of the low-temperature radiator compared to a conventional charge air cooler, more space is available in the front end, which can then be used for various measures such as pedestrian protection. The location close to the engine permits the use of shorter charge air lines, cutting the pressure loss by around 50%. The higher density of the cooled charge air and lower pressure loss means there is more air available to the engine for combustion. The result: improved engine responsiveness.

Product Features:

• Manufactured with the highest quality components to ensure product quality and durability
• Built with high density multi-louvered fins for maximum cooling efficiency
• All units are leak tested to ensure a damage-free unit at installation
• OE design to ensure exact fit, form and function for an easy installation

Designed, manufactured and thoroughly tested according to OE requirements. Nissens’ intercoolers are submitted to corrosion, vibration, pressure impulse, thermal expansion and thermal performance tests. Supreme thermal performance and extended lifespan thanks to a number of special features applied for Nissens’ intercoolers. Perfect finish and product fit, enabling a quick and smooth product installation.

Product Features:

• Tubes equipped with turbulators, ensuring better air flow and larger surface to exchange the heat.
• Compact fin construction with louvres increasing the heat exchange.
• Specially designed core end plates to minimize influence of the mechanical stress thus break-down.
• Plastic tanks designed with special reinforcing inner cross-bars and specially strengthened inlets and outlets.
• Specially designed side panels with cuts to lower the influence of thermal expansion on the core construction.
• Reinforced plastic tanks, enriched with at least 30-35% fibreglass.
• No recycled plastics are used.

Designed, manufactured and thoroughly tested according to OE requirements. Nissens’ intercoolers are submitted to corrosion, vibration, pressure impulse, thermal expansion and thermal performance tests. Supreme thermal performance and extended lifespan thanks to a number of special features applied for Nissens’ intercoolers. Perfect finish and product fit, enabling a quick and smooth product installation.

Product Features:

• Tubes equipped with turbulators, ensuring better air flow and larger surface to exchange the heat.
• Compact fin construction with louvres increasing the heat exchange.
• Specially designed core end plates to minimize influence of the mechanical stress thus break-down.
• Plastic tanks designed with special reinforcing inner cross-bars and specially strengthened inlets and outlets.
• Specially designed side panels with cuts to lower the influence of thermal expansion on the core construction.
• Reinforced plastic tanks, enriched with at least 30-35% fibreglass.
• No recycled plastics are used.

Designed, manufactured and thoroughly tested according to OE requirements. Nissens’ intercoolers are submitted to corrosion, vibration, pressure impulse, thermal expansion and thermal performance tests. Supreme thermal performance and extended lifespan thanks to a number of special features applied for Nissens’ intercoolers. Perfect finish and product fit, enabling a quick and smooth product installation.

Product Features:

• Tubes equipped with turbulators, ensuring better air flow and larger surface to exchange the heat.
• Compact fin construction with louvres increasing the heat exchange.
• Specially designed core end plates to minimize influence of the mechanical stress thus break-down.
• Plastic tanks designed with special reinforcing inner cross-bars and specially strengthened inlets and outlets.
• Specially designed side panels with cuts to lower the influence of thermal expansion on the core construction.
• Reinforced plastic tanks, enriched with at least 30-35% fibreglass.
• No recycled plastics are used.

New Platinum Pro Turbocharger Intercooler/Charge Air Cooler, 2.0 Liter L4 Engine TDI

Product Features:

• 2.0 Liter L4 Engine TDI, Made Of Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Platinum Pro Charge Air Cooler/Intercooler, Turbocharger, 2.0 Liter Gas Engines

Product Features:

• Turbocharger, 2.0 Liter Gas Engines, Made Of Plastic and Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Platinum Pro Passenger Side Turbocharger Intercooler/Charge Air Cooler, 2.0 Liter L4 Engine, To Vin 7803500

Product Features:

• 2.0 Liter L4 Engine, To Vin 7803500, Made Of Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Platinum Pro Driver Side Turbocharger Intercooler/Charge Air Cooler, 2.0 Liter L4 Engine Turbo

Product Features:

• 2.0 Liter L4 Engine Turbo, Made Of Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Designed, manufactured and thoroughly tested according to OE requirements. Nissens’ intercoolers are submitted to corrosion, vibration, pressure impulse, thermal expansion and thermal performance tests. Supreme thermal performance and extended lifespan thanks to a number of special features applied for Nissens’ intercoolers. Perfect finish and product fit, enabling a quick and smooth product installation.

Product Features:

• Tubes equipped with turbulators, ensuring better air flow and larger surface to exchange the heat.
• Compact fin construction with louvres increasing the heat exchange.
• Specially designed core end plates to minimize influence of the mechanical stress thus break-down.
• Plastic tanks designed with special reinforcing inner cross-bars and specially strengthened inlets and outlets.
• Specially designed side panels with cuts to lower the influence of thermal expansion on the core construction.
• Reinforced plastic tanks, enriched with at least 30-35% fibreglass.
• No recycled plastics are used.