Audi A3 Sportback e-tron Steering and Chassis Parts
Top Audi A3 Sportback e-tron Steering and Chassis Parts Categories
We carry over 24 Steering and Chassis Parts in inventory for the Audi A3 Sportback e-tron. If you’re looking for aftermarket Steering and Chassis Parts for your Audi A3 Sportback e-tron, check out all these categories:
Essential Audi A3 Sportback e-tron Steering and Chassis Parts
Whiteline – Roll Centre/Bump Steer Correction Kit (Part No.KCA472)
from
$185.99
A must for lowered vehicles, Whiteline roll centre and camber adjusting correction kit, is designed to correct roll-centre geometry using specially engineered ball-joints, whilst at the same time allowing fine tunning of camber settings with up to a degree of negative camber gain, perfect for track days and spirited driving! Raising the front roll-centre (along with negative camber) results in a substantial increase to front roll resistance and a significant reduction in suspension compression on the outside front tyre during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip, cornering speeds and tyre life when driving the vehicle to it’s potential.
Product Features:
See More
Product Features:
- Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
- Engineered to rectify roll centre on lowered vehicles, optimising the vehicles steering characteristics.
- Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Rare Parts – Ball Joint (Part No.RP11393)
from
$94.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Rare Parts – Ball Joint (Part No.RP11392)
from
$94.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
MOOG – Suspension Ball Joint (Part No.K500030)
from
$105.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- Hardened ball stud made of OE equivalent or better materials to withstand higher loads
- Easy to install.
- Construction and design validated by MOOG engineers
- Premium forged housing with increased cross section of up to 52% more material in key areas
- Broad coverage for foreign and domestic applications
- Designed to meet or exceed original equipment performance
MOOG – Front Right Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK622883)
from
$127.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
MOOG – Front Left Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK622882)
from
$128.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.RK623822)
from
$98.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- KEEPS DIRT AND WATER OUT – Pre-installed dust boot seal provides an effective barrier against wear-causing contaminants
- KEEPS DIRT AND WATER OUT – Pre-installed dust bootáseal provides an effective barrier againstáwear-causing contaminants
- ADDED CORROSION PROTECTION – Specially- engineered coatings are applied to metal surfaces to inhibit premature deterioration caused by rain, snow, salt and road grime
- ADDED CORROSION PROTECTIONá- Specially- engineered coatings are applied to metal surfaces toáinhibit premature deterioration caused by rain, snow, salt and road grime
- PREMIUM BUSHINGS – Pre-installed with optimized stiffness to inhibit noise for a comfortable ride
- HARDWARE INCLUDED – Comes with all necessary hardware for easy, fast installation
- ENHANCED STRUCTURAL STRENGTH – Material and heat treatment are carefully selected to meet application requirements
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.RK623823)
from
$98.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- HARDENDED TO MAXIMIZE STRENGTH – Studs are induction hardened to maximize strength, resist breakage and improve fatigue life
- HARDENDED TO MAXIMIZE STRENGTHá-áStuds are induction hardened to maximize strength, resist breakage and improve fatigue life
- KEEPS DIRT AND WATER OUT – Pre- installed dust boot seal provides an effective barrier against water- causing contaminants
- KEEPS DIRT AND WATER OUT – Pre- installed dust bootáseal provides an effective barrier againstáwater- causing contaminants
- ADDED CORROSION PROTECTION – Specially-engineered coatings are applied to metal surfaces to inhibit premature deterioration caused by rain, snow, salt and road grime
- ADDED CORROSION PROTECTIONá- Specially-engineered coatings are applied to metal surfaces toáinhibit premature deterioration caused by rain, snow, salt and road grime
- PREMIUM BUSHINGS – Pre-installed with optimized stiffness to inhibit noise for a comfortable ride
- HARDWARE INCLUDED – Comes with all necessary hardware for easy, fast installation
- ENHANCED STRUCTURAL STRENGTH – Material and heat treatment are carefully selected to meet application requirements
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
Rare Parts – Tie Rod End (Part No.RP28582)
from
$99.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – Tie Rod End (Part No.RP28581)
from
$94.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Carquest Premium – Tie Rod End (Part No.310-234678)
from
$43.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
MOOG – Steering Tie Rod End (Part No.ES80666)
from
$57.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
MOOG – Suspension Ball Joint (Part No.K500016)
from
$105.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- Hardened ball stud made of OE equivalent or better materials to withstand higher loads
- Easy to install.
- Construction and design validated by MOOG engineers
- Restores like-new steering and handling
- Broad coverage for foreign and domestic applications
- Designed to meet or exceed original equipment performance
Dorman – Alignment Camber / Toe Lateral Link (Part No.528-316)
from
$171.99
This alignment camber and toe lateral link is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Carquest Premium – Stabilizer Bar Link (Part No.644-01562)
from
$25.99
Carquest Premium sway bar links are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium sway bar links, or also known as stabilizer bar links, utilize the same joint technology as the OE part, utilizing the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all steel sway bar links to reduce rust. Each part number in the Carquest Premium sway bar link line is designed and built to deliver the quality that you demand.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Corrosion-resistant coating on steel links to reduce rust and extend service life
- Hex formed studs for easier installation (where applicable)
- Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Hardware included for easier installation (where applicable)
MOOG – Suspension Stabilizer Bar Link (Part No.K750809)
from
$53.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Audi A3 Sportback e-tron Steering and Chassis Parts Categories
Helping You Find the Right Steering and Chassis Parts for Your Audi A3 Sportback e-tron
You love your A3 Sportback e-tron. So we’ve made it easier than ever to help you find Audi A3 Sportback e-tron Steering and Chassis Parts in our online catalog. Our inventory holds 24 aftermarket and OEM Steering and Chassis Parts for your Audi A3 Sportback e-tron, ranging from $14.49 to $185.99.
We offer parts from 6 brands trusted to make quality Steering and Chassis Parts for your Audi A3 Sportback e-tron. Before you buy, take some time to read through customer reviews. We currently have 45 reviews of Audi A3 Sportback e-tron Steering and Chassis Parts from previous customers. Some of the top rated parts include Tie Rod End with 1.0 stars.
Find your A3 Sportback e-tron Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Audi A3 Sportback e-tron part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Steering and Chassis Parts Brands for Your Audi A3 Sportback e-tron
Our inventory holds Steering and Chassis Parts for your Audi A3 Sportback e-tron from 6 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest Premium, Moog, and Rein, all of which can keep that Audi happy.
We have MOOG parts available for your Audi A3 Sportback e-tron in categories like Tie Rods. Some of the top-rated MOOG parts in these categories are:
FAQs for Audi A3 Sportback e-tron Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the Audi A3 Sportback e-tron?
Out of 24 Steering and Chassis Parts for the Audi A3 Sportback e-tron, the most popular in our inventory are:
What are the top-rated Audi A3 Sportback e-tron Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your Audi A3 Sportback e-tron based on customer reviews/ratings are:
from
$48.49
(1)
Tie Rod End
“Bought this because the site/item listed as including the dust boot….it does NOT. Makes you wonder what other information is bad. I found out this a”
