2016 Audi A3 Sportback e-tron Steering and Chassis Parts

Essential Steering and Chassis Parts for 2016 Audi A3 Sportback e-trons

MOOG – Ball Joint (Part No.K500030)

Ball Joint

from

$104.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  • Easy to install.
  • Construction and design validated by MOOG engineers
  • Premium forged housing with increased cross section of up to 52% more material in key areas
  • Broad coverage for foreign and domestic applications
  • Designed to meet or exceed original equipment performance
See More

MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.RK623822)

Suspension Control Arm and Ball Joint Assembly

from

$98.99
Suspension Control Arm and Ball Joint Assembly

MOOG – Control Arm and Ball Joint Assembly (Part No.RK622883)

Control Arm and Ball Joint Assembly

from

$127.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

Febi – Sway Bar Link Nut (Part No.L1038422923FEB)

Sway Bar Link Nut

from

$1.86
Sway Bar Link Nut

Carquest Premium – Stabilizer Bar Link (Part No.644-01562)

Stabilizer Bar Link

from

$36.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

Rare Parts – Ball Joint (Part No.RP11393)

Ball Joint

from

$75.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

Lemfoerder – OE Replacement Ball Joint (Part No.L2020444925LEM)

OE Replacement Ball Joint

from

$78.09
The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

Carquest Premium – Tie Rod End (Part No.310-234679)

Tie Rod End

from

$42.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

Delphi – Tie Rod End (Part No.M3010405634DEL)

Tie Rod End

from

$31.28
Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.

Product Features:
  • Delphi tie rods are fatigue tested to avoid failure
  • Delphi includes the necessary accessories for a complete job
  • Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
  • Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics
See More

Whiteline – Sway Bar Vehicle Kit (Part No.BWK018)

Sway Bar Vehicle Kit

from

$853.99
Engineered to ‘Activate More Grip’, BWK018 is a packaged solution designed to improve performance and enhance the driving experience of your vehicle. Boasting a 24mm 2 point adjustable front sway bar and 22mm 2 point adjustable rear sway bar, the kit is completed with front and rear sway bar links and mounting accessories (where applicable) that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this Whiteline Sway Bar Kit.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
See More

Dorman – Alignment Camber / Toe Lateral Link (Part No.528-316)

Alignment Camber / Toe Lateral Link

from

$171.99
This alignment camber and toe lateral link is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Vaico – Sway Bar Link Bolt (Part No.L1036567755VCO)

Sway Bar Link Bolt

from

$2.77
Sway Bar Link Bolt

Febi – Steering Rack Boot C (Part No.M1011452369FEB)

Steering Rack Boot C

from

$3.60
The Febi Steering Rack Boot Clamp is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Manufactured to meet or exceed OE specifications
See More

Beck/Arnley – Steering Rack Boot Kit (Part No.103-2912)

Steering Rack Boot Kit

from

$25.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot (this is not a split boot)
  • Includes boot and two clamps for complete installation.
  • Quality construction for durability
  • Application specific for this vehicle
See More

Whiteline – Roll Centre/Bump Steer Correction Kit (Part No.KCA472)

Roll Centre/Bump Steer Correction Kit

from

$249.99
A must for lowered vehicles, Whiteline roll centre and camber adjusting correction kit, is designed to correct roll-centre geometry using specially engineered ball-joints, whilst at the same time allowing fine tunning of camber settings with up to a degree of negative camber gain, perfect for track days and spirited driving! Raising the front roll-centre (along with negative camber) results in a substantial increase to front roll resistance and a significant reduction in suspension compression on the outside front tyre during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip, cornering speeds and tyre life when driving the vehicle to it’s potential.

Product Features:
  • Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
  • Engineered to rectify roll centre on lowered vehicles, optimising the vehicles steering characteristics.
  • Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

Upgrade your 2016 Audi A3 Sportback e-tron with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2016 Audi A3 Sportback e-tron, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Audi or enhancing its overall performance, Steering and Chassis Parts are key to keeping your A3 Sportback e-tron functioning at its best. At Advance Auto Parts, we offer a wide selection of 34 Steering and Chassis Parts for the 2016 Audi A3 Sportback e-tron, designed to meet your needs without breaking the bank. From Power Steering Part replacements to Ball Joints upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2016 Audi A3 Sportback e-tron at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $1.83 to $853.99, with an average price of $80.93. Our 34 Steering and Chassis Parts in stock come from 13 trusted brands, so you’re sure to find the right part for your 2016 Audi A3 Sportback e-tron without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2016 Audi A3 Sportback e-tron, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Carquest Premium Moog, and more. Carquest Premium Steering and Chassis Parts start at just $14.29 and boast an impressive 4 stars average rating from customers. With 18 customer reviews and counting, our 2016 Audi A3 Sportback e-tron Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2016 Audi A3 Sportback e-tron is always ready to roll. We’re committed to providing you with everything you need to keep your A3 Sportback e-tron in top shape, all in one place. Start shopping confidently below for your 2016 Audi A3 Sportback e-tron!

Best-Selling Power Steering Parts for 2016 Audi A3 Sportback e-trons

Enhance the driving experience in your Audi with 4 quality Power Steering Part components, starting at $2.73.

Beck/Arnley – Steering Rack Boot Kit (Part No.103-2912)

Steering Rack Boot Kit

from

$25.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot (this is not a split boot)
  • Includes boot and two clamps for complete installation.
  • Quality construction for durability
  • Application specific for this vehicle
See More

Febi – Steering Rack Boot C (Part No.M1011452369FEB)

Steering Rack Boot C

from

$3.60
The Febi Steering Rack Boot Clamp is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Manufactured to meet or exceed OE specifications
See More

Febi – Steering Rack Boot Clamp (Part No.M1011452370FEB)

Steering Rack Boot Clamp

from

$3.63
The Febi Steering Rack Boot Clamp is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Manufactured to meet or exceed OE specifications
See More

MTC – Radiator Hose Clamp (Part No.G2010932381MTC)

Radiator Hose Clamp

from

$2.73
Radiator Hose Clamp

Most Popular 2016 Audi A3 Sportback e-tron Ball Joints

Customize your Audi with 11 Ball Joints products like Lower Ball Joints, Lower Control Arm and Ball Joints, and Suspension Ball Joint Kits, all priced under $127.99.

MOOG – Ball Joint (Part No.K500016)

Ball Joint

from

$104.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  • Easy to install.
  • Construction and design validated by MOOG engineers
  • Restores like-new steering and handling
  • Broad coverage for foreign and domestic applications
  • Designed to meet or exceed original equipment performance
See More

MOOG – Ball Joint (Part No.K500030)

Ball Joint

from

$104.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  • Easy to install.
  • Construction and design validated by MOOG engineers
  • Premium forged housing with increased cross section of up to 52% more material in key areas
  • Broad coverage for foreign and domestic applications
  • Designed to meet or exceed original equipment performance
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK622883)

Control Arm and Ball Joint Assembly

from

$127.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK622882)

Control Arm and Ball Joint Assembly

from

$102.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.RK623822)

Suspension Control Arm and Ball Joint Assembly

from

$98.99
Suspension Control Arm and Ball Joint Assembly

MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.RK623823)

Suspension Control Arm and Ball Joint Assembly

from

$98.99
Suspension Control Arm and Ball Joint Assembly

Lemfoerder – OE Replacement Ball Joint (Part No.L2020444924LEM)

OE Replacement Ball Joint

from

$79.49
The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

Lemfoerder – OE Replacement Ball Joint (Part No.L2020444925LEM)

OE Replacement Ball Joint

from

$78.09
The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

Rare Parts – Ball Joint (Part No.RP11393)

Ball Joint

from

$75.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

Carquest Premium – BALL JOINT (Part No.410-18030)

BALL JOINT

from

$14.29
BALL JOINT

Carquest Premium – BALL JOINT (Part No.410-18031)

BALL JOINT

from

$14.29
BALL JOINT

Top Picks for 2016 Audi A3 Sportback e-tron Tie Rods

Upgrade Audi A3 Sportback e-trons with top-quality Tie Rods parts, including 11 OEM and aftermarket selections for your 2016 model.

Delphi – Tie Rod End (Part No.M3010405634DEL)

Tie Rod End

from

$31.28
Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.

Product Features:
  • Delphi tie rods are fatigue tested to avoid failure
  • Delphi includes the necessary accessories for a complete job
  • Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
  • Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics
See More

MOOG – Tie Rod End (Part No.ES80666)

Tie Rod End

from

$58.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

MOOG – Tie Rod End (Part No.ES80667)

Tie Rod End

from

$58.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Carquest Premium – OE matched design for Form, Fit, and Function (Part No.700-234677)

OE matched design for Form, Fit, and Function

from

$47.99
Advanced corrosion-resistant electro-coating to reduce rust

Product Features:
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
  • Thread locking compound included.
See More

Carquest Premium – Tie Rod End (Part No.310-234678)

Tie Rod End

from

$42.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

Carquest Premium – Tie Rod End (Part No.310-234679)

Tie Rod End

from

$42.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

MOOG – Tie Rod End (Part No.EV80665)

Tie Rod End

from

$60.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Assembled in the USA
  • TIME SAVINGS — Pre-applied thread locking compound makes installation easier and prevents self-loosening
See More

Rein – Inner Tie Rod (Part No.SCI0138R)

Inner Tie Rod

from

$29.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.
See More

Delphi – Tie Rod End (Part No.M3010405633DEL)

Tie Rod End

from

$31.28
Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.

Product Features:
  • Delphi tie rods are fatigue tested to avoid failure
  • Delphi includes the necessary accessories for a complete job
  • Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
  • Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics
See More

OCAP – OCAP Tie Rod End (Part No.M3010407005OCP)

OCAP Tie Rod End

from

$22.55
Made in Italy, OCAP tie rod ends are manufactured to exacting tolerances for a proper fit and function. Developed for the rigors of everyday driving, OCAP tie rod are fatigue tested for structural integrity and consistency in longevity

Product Features:
  • Made in Italy
  • Original equipment supplier
  • Manufactured in ISO 9001 certified facilities
  • Fatigue tested for structural integrity
  • Precision made components for an ideal fit and function
  • Adjustable for proper alignment
See More

Rein – Tie Rod End (Part No.SCE0156R)

Tie Rod End

from

$13.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.
See More

In-Demand Sway Bars for 2016 Audi A3 Sportback e-trons

Select from 6 premium Sway Bars parts for your 2016 Audi A3 Sportback e-tron, with prices ranging from $1.83 to $853.99.

Carquest Premium – Stabilizer Bar Link (Part No.644-01562)

Stabilizer Bar Link

from

$36.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

MOOG – Stabilizer Bar Link (Part No.K750809)

Stabilizer Bar Link

from

$52.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Febi – Sway Bar Link Nut (Part No.L1038413440FEB)

Sway Bar Link Nut

from

$1.83
Sway Bar Link Nut

Whiteline – Sway Bar Vehicle Kit (Part No.BWK018)

Sway Bar Vehicle Kit

from

$853.99
Engineered to ‘Activate More Grip’, BWK018 is a packaged solution designed to improve performance and enhance the driving experience of your vehicle. Boasting a 24mm 2 point adjustable front sway bar and 22mm 2 point adjustable rear sway bar, the kit is completed with front and rear sway bar links and mounting accessories (where applicable) that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this Whiteline Sway Bar Kit.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
See More

Vaico – Sway Bar Link Bolt (Part No.L1036567755VCO)

Sway Bar Link Bolt

from

$2.77
Sway Bar Link Bolt

Febi – Sway Bar Link Nut (Part No.L1038422923FEB)

Sway Bar Link Nut

from

$1.86
Sway Bar Link Nut

Most Sold 2016 Audi A3 Sportback e-tron Alignment Hardware

Explore our best-selling Audi parts for the 2016 A3 Sportback e-tron among 1 OEM and aftermarket options starting from $249.99.

Whiteline – Roll Centre/Bump Steer Correction Kit (Part No.KCA472)

Roll Centre/Bump Steer Correction Kit

from

$249.99
A must for lowered vehicles, Whiteline roll centre and camber adjusting correction kit, is designed to correct roll-centre geometry using specially engineered ball-joints, whilst at the same time allowing fine tunning of camber settings with up to a degree of negative camber gain, perfect for track days and spirited driving! Raising the front roll-centre (along with negative camber) results in a substantial increase to front roll resistance and a significant reduction in suspension compression on the outside front tyre during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip, cornering speeds and tyre life when driving the vehicle to it’s potential.

Product Features:
  • Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
  • Engineered to rectify roll centre on lowered vehicles, optimising the vehicles steering characteristics.
  • Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

Top-Rated Steering and Chassis Parts Brands For Your 2016 Audi A3 Sportback e-tron

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2016 Audi A3 Sportback e-trons. Below you’ll find some of our best rated Steering and Chassis Parts from Carquest Premium and Moog, and more. Steering and Chassis Parts from these brands that fit a 2016 A3 Sportback e-tron start at just $14.29 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Premium 2016 Audi A3 Sportback e-tron Steering and Chassis Parts

When it comes to maintaining or upgrading your 2016 Audi A3 Sportback e-tron, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Steering and Chassis Parts, specifically designed for the 2016 Audi A3 Sportback e-tron. With over 6 Carquest Premium brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.29, with an average price of just $33.26. Plus, with over 1 customer reviews and an average rating of 4 stars, you can trust that our Carquest Premium Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Stabilizer Bar Link
from
$36.99
This product is not rated

Stabilizer Bar Link

“”

Tie Rod End
from
$42.99
This product is not rated

Tie Rod End

“”

Tie Rod End
from
$42.99
This product is not rated

Tie Rod End

“”

Popular Moog 2016 Audi A3 Sportback e-tron Steering and Chassis Parts

Moog auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2016 Audi A3 Sportback e-tron owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 2016 A3 Sportback e-tron, Advance Auto Parts carries a full inventory of 10 Moog Steering and Chassis Parts. Plus you will be keeping your Audi in peak condition while saving money because prices on these Moog Steering and Chassis Parts range from $52.99 to $127.99, plus, with more than 4 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

Ball Joint
from
$104.99
This product is not rated

Ball Joint

“”

Tie Rod End
from
$60.99
This product is not rated

Tie Rod End

“”

Stabilizer Bar Link
from
$52.99
This product is not rated

Stabilizer Bar Link

“”

FAQs for 2016 Audi A3 Sportback e-tron Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2016 Audi A3 Sportback e-trons?

Out of 34 Steering and Chassis Parts that fit 2016 Audi A3 Sportback e-trons, the following parts are the top sellers:

What’s the price range for 2016 Audi A3 Sportback e-tron Steering and Chassis Parts?

Steering and Chassis Part prices for the 2016 Audi A3 Sportback e-tron start at $1.83 and go up to $853.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2016 Audi A3 Sportback e-tron?

The average price for Steering and Chassis Parts for the 2016 Audi A3 Sportback e-tron is $80.93. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Audi A3 Sportback e-tron model years?

Yes, we currently carry Steering and Chassis Parts for 2 model years of Audi A3 Sportback e-trons between 2017 and 2018. Steering and Chassis Parts are bought most frequently for the following model years: 2018 and 2017.

What are the cheapest Steering and Chassis Parts for my 2016 Audi A3 Sportback e-tron?

The cheapest 2016 Audi A3 Sportback e-tron Steering and Chassis Parts we carry in stock are:

What are the top-rated Steering and Chassis Parts that fit the 2016 Audi A3 Sportback e-tron?

Out of 18 reviews by customers, our 2016 Audi A3 Sportback e-tron Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2016 Audi A3 Sportback e-tron and their top-rated products:

What types of Steering and Chassis Parts do you sell for my 2016 Audi A3 Sportback e-tron?

Can I get help with 2016 Audi A3 Sportback e-tron Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Audi Steering and Chassis Parts and more.

What is your return policy for Audi A3 Sportback e-tron Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Audi A3 Sportback e-tron Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.