Audi 4000 Quattro Filters and PCVs

Carquest Premium engine air filters are designed to meet OE fit, form and function for optimal filtration and engine protection. High-quality paper, enhanced bonding, and reinforced metal screen backing give Carquest Premium air filters the added strength and durability that modern engines demand. Built to meet or exceed original equipment standards, Carquest Premium air filters provide exceptional engine protection and optimal performance in all driving conditions.

Product Features:

• Precision engineered to match OE fit, form and function
• Media provides 99% filtration efficiency and larger capacity
• Sealing materials are designed for each application to ensure a positive seal
• Reinforced metal screen backing with anti-rust coating on applicable applications
• Built to withstand high CFM conditions of forced induction engines

To achieve optimum performance, combustion engines require clean intake air. If pollutants in the air, such as soot or dust, get into the combustion chamber, pitting may occur on the cylinder heads, causing premature wear of the engine. The function of electronic parts located between the suction and the combustion chamber may also be significantly impaired. MANN-FILTER air filters are the end of the road for all dirt particles. No matter whether it’s dust, pollen, sand, soot or even water droplets – thanks to the highest degree of dirt separation and high mechanical stability, MANN-FILTER air filters filter even the smallest particles out of the intake air. This enables an optimum composition of the fuel-air ratio and ensures that the engine performance is consistent. In order to guarantee performance, air filters must be checked regularly, as a blocked filter will impede the air supply to the engine. The possible consequence of this is: the fuel may not be completely burned and may in part be discarded without being used.

Product Features:

• Highest degree of dirt separation and high mechanical stability
• Perfectly adapted in form and function to the widest possible range of installation situations
• Filter even the smallest particles out of the intake air
• Enables an optimum composition of the fuel-air ratio and ensures that the engine performance is consistent
• High dust holding capacity ensures reliability throughout the entire service interval

Constructed with 100-percent polyurethane boxed frame, this high flow, oiled OE replacement performance filter will outflow the stock filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.

Product Features:

• High Flow For Increased Performance
• Progressive 5 Layer Cotton Gauze Material
• Deep Cotton Pleats for Increased Flow
• Progressive Bump Seal For Leak-Free Seal

AGS ACCUFIT Oil Drain Plug is a high-coverage/low-part number program that covers up to 93% of all vehicles on the road, including domestic, European, Japanese, British, and Korean models, while reducing inventory and associated costs by 80%. Reducing stocked part numbers to just 13 and the superior quality built-in features make ACCUFIT your number one choice for oil drain plugs. Easy Install – Finger-grip wing for ease of installation. All plugs have 14mm hex – just one wrench works for all! Hi-Temp Gasket – Red hi-temp gasket for max sealing protection. Easy ID – Thread size etched on each plug. Rust Protection – Black oxide coating for rust and corrosion protection. Avoid Cross-Threading – Pilot-point tip to avoid cross-threading during installation.

Product Features:

• Easy Install – Finger-grip wing for ease of installation
• All plugs have 14mm hex – just one wrench works for all
• Hi-Temp Gasket – Red hi-temp gasket for max sealing protection

FRAM Drive is the perfect oil filter for everyday driver. Designed with OE grade synthetic blend media and compatible with both conventional and synthetic oil types, FRAM Drive keeps engine protected for up to 7,500 miles (12,000 kilometers). FRAM Drive is engineered to withstand high temperatures and endure working pressures common in today’s engines.

Product Features:

• Proven protection for up to 7,500 miles
• Engineered for use with synthetic or conventional motor oil
• Precision Relief Valve provides consistent oil flow, even in cold conditions
• Designed for everyday drivers who perform oil changes at OE (original equipment) recommended intervals

Mobil 1 Extended Performance Oil Filters are built with strong, durable components and are tested and proven to protect 2X as long as auto manufacturers recommended oil change intervals. A high-efficiency synthetic blend media removes over 99% of harmful contaminants keeping oil cleaner, longer. Enhanced nitrile gasket remains pliable to help prevent oil leaks while a durable anti-drain back valve protects against dry starts. Durable, heavy-duty filter canister withstands 9X the normal vehicle oil system operating pressure. These are just some of the advanced technologies that go into making an oil filter that can provide proven protection for up to one full year or 20,000 miles. Meets requirements of the Mobil 1 annual protection limited warranty.

Product Features:

• Protects for 20,000 Miles or up to 1 year – GUARANTEED
• Tested and proven to protect 2X as long as auto manufacturers’ recommended oil change intervals
• Removes over 99% of contaminants – synthetic blend media keeps oil cleaner and holds more dirt than economy filters
• Strong, durable components for long lasting performance
• Premium O-ring to help prevent leaks

PurolatorBOSS Premium Oil Filters are the next generation in oil filtration, delivering maximum engine protection for up to 20,000 miles. PurolatorBOSS exclusively features SmartFUSION Technology “ a full synthetic filter media with reinforced polymer mesh backing for over 99% Dirt Removal Power. Engineered to work well with all oil types and viscosities, especially full synthetic oil, PurolatorBOSS is ideal for the most demanding driving conditions, including frequent towing and hauling, stop and go traffic, long commutes, long idle periods and extreme climates. Its rugged internal construction withstands wear and high mileage with a heavy duty BOSS Steel Casing and an innovative double helix, high-flow center tube for twice the strength of traditional side-seam designed center tubes. Widely available for most vehicles on the road today, PurolatorBOSS combines the latest filter technologies for long-lasting protection and advanced engine performance. Up to 20,000 miles – maximum engine protection; over 99% Dirt Removal Power. SmartFUSION Technology “ a full synthetic filter media with reinforced polymer mesh backing for expanded dirt holding capacity. Silicone anti-drainback valve prevents dry starts. BOSS Steel Casing withstands extreme pressure while metal end-caps enhance durability. PuroSEAL Gasket made from ethylene-acrylic for maximum leak protection.

Product Features:

• Up to 20,000 miles – maximum engine protection
• Ideal for full synthetic oils
• Over 99% Dirt Removal Power
• SmartFUSION Technology – a full synthetic filter media with reinforced polymer mesh backing for expanded dirt holding capacity
• Silicone anti-drainback valve prevents dry starts
• BOSS Steel Casing withstands extreme pressure while metal end-caps enhance durability
• PuroSEAL Gasket made from ethylene-acrylic for maximum leak protection

FRAM Titanium advanced high-flow synthetic oil filters offer ultimate engine protection for up to 20,000 miles (32,000 kilometers). Engineered with premium synthetic blend media, FRAM Titanium provides over 99% dirt trapping efficiency.

Product Features:

• Proven protection for up to 20,000 miles
• Total Grip textured surface for easy install and removal
• Silicone anti-drain back valve helps ensure safe engine start up
• FRAM Powerflow technology allows for efficient oil flow over the filter media

The Mobil1 Extended Performance Oil Filter utilizes synthetic fibers to leave your vehicle with cleaner oil and an engine that performs better and lasts longer. When used with Mobil 1 fully synthetic motor oil, this filter offers dependable protection for your engine.

Product Features:

• Designed for today’s longer service intervals.
• Advanced synthetic fiber-blend filter media for enhanced contaminant removal.
• High-capacity design stores an increased amount of contaminants.
• Reduces resistance to oil flow while improving filter efficiency.
• Withstands up to 5x the normal system operating pressure.

CARQUEST Standard Oil Filters give you the level of quality and application you have come to expect from the CARQUEST name.

Product Features:

• 94.1% efficiency rating at 20 microns
• Meets new car warranty requirements
• Precision coil spring relief valve
• Nitrile anti-drainback valve for engine start-up protection
• Metal end caps
• Cellulose/synthetic blended media
• Internally lubricated gasket

Carquest Premium oil filters are built for durability, utilizing enhanced components to protect engines for the extended drain intervals of modern vehicles using conventional or synthetic lubricants. Our oil filters are built with synthetic blend media that provides 2X the capacity and up to 10,000 miles of protection. Carquest Premium filters feature silicone sealing gaskets for better performance in extreme temperatures. Carquest Premium oil filters meet or exceed original equipment (O.E.) specifications and meet the requirements for maintaining a new vehicle warranty.

Product Features:

• Protection for up to 10,000 miles
• Synthetic blend media provides 99.5% efficiency at 20 microns and 2X capacity vs. Standard filters
• Solid metal end caps are designed to be long lasting
• Silicone anti-drain back valve for engine start-up protection
• Heavy-duty steel baseplate provides additional strength to resist leakage
• Heavy gauge steel canister withstands high pressure operating conditions
• Silicone sealing gasket performs better in extreme temperature conditions and longer drain intervals (silicone gasket is new feature introduced as a running change)
• Meets requirements for maintaining new vehicle warranties

PurolatorONE Oil Filters keep engines operating at peak performance with up to 99% Dirt Removal Power. Available for most domestic and import applications, PurolatorONE optimizes engine life for up to 15,000 miles of advanced protection for most vehicles on the road today. Made with a high-density synthetic blend filter media and wear-resistant metal end caps, PurolatorONE maintains its integrity and filtering capabilities between oil changes. PurolatorONE is ideal for a wide range of tough driving conditions, including towing, stop and go traffic, commuting and harsh weather conditions. Offers advanced engine protection, especially when used with all synthetic and high mileage oils.

Product Features:

• Up to 15,000 miles – advanced engine protection
• Ideal for all synthetic and high mileage oils
• 99% Dirt Removal Power
• High-density synthetic blend media
• Silicone anti-drainback valve prevents dry starts
• PTFE treated gasket; Heat resistant – stays flexible for advanced leak protection
• Metal end caps provide stability and integrity for greater wear resistance

Carquest Premium Oil Spin-on Filters protect your engine by removing contaminants, such as dirt, metal particles, and sludge, from your engine oil. These filters effectively remove contaminants that can cause significant wear and damage to critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the oil clean, these filters help ensure proper lubrication and cooling, reduce friction and help extend engine life. Carquest Premium Oil Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA

Carquest Standard oil filters are designed to meet the original equipment (O.E.) specifications and the requirements for maintaining new vehicle warranties. Our oil filters use nitrile sealing gaskets and solid steel baseplates to prevent oil leaks. Carquest Standard oil filters feature cellulose media for increased efficiency at capturing dirt and debris. Each Carquest Standard oil filter is built with rugged components for durability and utilizes multifiber, high-density media for optimal engine protection up to 5,000 miles.

Product Features:

• Protection for up to 5,000 miles
• Cellulose media provides 95.1% efficiency at 20 Microns for increased engine protection
• Nitrile anti-drain back valve for engine start-up protection
• Lathe cut nitrile sealing gasket prevents leaks
• Double fluted spiral wound center tube allows maximum flow and provides additional strength
• Solid steel baseplate provides additional strength to resist leakage
• Meets requirements for maintaining new vehicle warranties

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:

• HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
• VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
• PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
• EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
• EASY TO REMOVE: Fast and easy Wrench-Off removal
• HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
• HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers

More and more performance, less and less consumption – in order to meet the high demands placed on modern engines, automobile manufacturers demand the absolute highest levels of performance from the engine components used. The oil circuit is of central importance here, as only clean engine oil can permanently ensure consistent engine performance. If the circulating oil is not permanently freed of impurities and combustion residues, protection from wear is no longer guaranteed. In the worst case, this may even damage the engine. If you want to play it safe when choosing an oil filter, choose MANN-FILTER. They are designed for modern high-performance oils and can stand up to even the most demanding technical challenges. As the application areas of oil filters and the demands placed on them vary, MANN-FILTER oil filters are available in different designs.

Product Features:

• Outstanding dirt holding capacity
• Prolongs service intervals and continues to meet the technical requirements of high-performance engines
• Offers even faster and optimized oil supply when starting the engine